NXOpen::CAM::LatheUserDefined Class Reference

Represents a Lathe User Defined operation
To create or edit an instance of this class, use NXOpen::CAM::LatheUserDefinedBuilder

Created in NX7.5.0. More...

Inheritance diagram for NXOpen::CAM::LatheUserDefined:

Additional Inherited Members
Public Types inherited from NXOpen::CAM::CAMObject
enum	Attr {   AttrProjDiffTaxis = 1, AttrProfileFlipMside, AttrBndSplineTangent, AttrBlankNormalDiffTaxis,   AttrBndHasSleepObj, AttrClrnrNotParallelTaxis, AttrBndNotParallelFloor, AttrFloorNotUpToDate,   AttrSingleProfileWithFirstCut, AttrCutterConversionProblem, AttrAcceptDrivePosition = 100, AttrReparametrization = 110,   AttrBetweenFromStart = 120, AttrCurveCutRange = 130, AttrFixGssmCornerData = 140, AttrPlmConversion = 150,   AttrPlmFeedcomp, AttrPlmFillet, AttrPlmSlowdown, AttrPlmGeometry,   AttrWedmPoints = 160, AttrCavityMillInheritTrimBnds = 170, AttrRtdObsolete = 1000, AttrZlevelHolderParamChange = 2000,   AttrNcmObsoleteSeqControl = 2100, AttrNcmObsoleteCustomFeed, AttrNcmObsoleteLocalRetract, AttrNcmClearTraversalZero,   AttrNcmObsoleteEngretToClearance, AttrGmcInvalidNxVersion = 2201, AttrProbingInvalidNxVersion, AttrInspPathInvalidNxVersion = 2300,   AttrCustomDataGougingObsolete, AttrCustomDataGougingPartObsolete, AttrCustomDataGougingDriveObsolete, AttrCustomDataIgnoreLoopsObsolete,   AttrCustomDataIgnoreLoopsRemoved, AttrLimitToolRunOn = 2400, AttrScoprNcmChangeLinearNormalToPart, AttrPossibleToolAxisProblem }
	Represents the CAM attribute type. More...
enum	FeedRateUnit { FeedRateUnitNone, FeedRateUnitPerMinute, FeedRateUnitPerRevolution }
	The unit of feed rate. More...
enum	Status { StatusComplete, StatusRepost, StatusRegen, StatusApproved = 4 }
	The status of the object. More...
Public Member Functions inherited from NXOpen::CAM::UserDefinedOpr
NXOpen::CAM::UserDefinedOpr *	GetSourceUdop ()
	Get source udop for the exit udopcopy. More...
void	SetStatusToRegenerate ()
	Set operation status to regenerate Created in NX8.5.0. More...

Detailed Description

Represents a Lathe User Defined operation
To create or edit an instance of this class, use NXOpen::CAM::LatheUserDefinedBuilder

Created in NX7.5.0.

---

The documentation for this class was generated from the following file:

• CAM_LatheUserDefined.hxx