NX Open C++ Reference Guide
|
cam setup
To obtain an instance of this class, use NXOpen::Part::CAMSetup
Created in NX4.0.0.
More...
Public Member Functions | |
void | ApproveObjects (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Approve objects Created in NX6.0.0. More... | |
void | BufferObjects (NXOpen::CAM::CAMSetup::View view, const std::vector< NXOpen::CAM::CAMObject * > &objectsToBeBuffered) |
Buffer objects to the clipboard and prepare for copy later Created in NX6.0.0. More... | |
NXOpen::CAM::NCGroupCollection * | CAMGroupCollection () |
Returns the NCGroupCollection instance belonging to this setup Created in NX3.0.0. More... | |
NXOpen::CAM::OperationCollection * | CAMOperationCollection () |
Returns the OperationCollection instance belonging to this setup Created in NX3.0.0. More... | |
void | CopyFromComponent () |
Copy From Component. More... | |
std::vector < NXOpen::CAM::CAMObject * > | CopyObjects (NXOpen::CAM::CAMSetup::View view, const std::vector< NXOpen::CAM::CAMObject * > &objectsToBeMoved, NXOpen::CAM::CAMObject *destinationObject, NXOpen::CAM::CAMSetup::Paste pastePosition) |
Copy objects. More... | |
std::vector < NXOpen::CAM::CAMObject * > | CopyObjectsWithReference (NXOpen::CAM::CAMSetup::View view, const std::vector< NXOpen::CAM::CAMObject * > &objectsToBeMoved, NXOpen::CAM::CAMObject *destinationObject, NXOpen::CAM::CAMSetup::Paste pastePosition) |
Copy objects with reference. More... | |
NXOpen::CAM::CutDepthChecker * | CreateCutDepthChecker () |
Creates a Cut Depth Checker. More... | |
NXOpen::CAM::FeatureProcessBuilder * | CreateFeatureProcessBuilder () |
Creates a CAM.FeatureProcessBuilder. More... | |
NXOpen::CAM::FeatureRecognitionBuilder * | CreateFeatureRecognitionBuilder (NXOpen::CAM::CAMObject *param) |
Creates a CAM.FeatureRecognitionBuilder. More... | |
NXOpen::CAM::FeatureTeaching * | CreateFeatureTeaching (NXOpen::CAM::CAMObject *param) |
Creates a CAM.FeatureTeaching. More... | |
NXOpen::CAM::ObjectsFeedsBuilder * | CreateFeedsBuilder (const std::vector< NXOpen::CAM::CAMObject * > ¶ms) |
Create Feeds builder. More... | |
NXOpen::CAM::FeedsOptimizeBuilder * | CreateFeedsOptimizeBuilder (NXOpen::CAM::CAMObject *param) |
Creates a feeds optimize builder. More... | |
NXOpen::CAM::GougeCheckBuilder * | CreateGougeCheckBuilder (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Create Gouge Check builder. More... | |
NXOpen::CAM::MirrorBuilder * | CreateMirrorBuilder (const std::vector< NXOpen::CAM::CAMObject * > &objectsToMirror) |
Create Mirror builder. More... | |
NXOpen::CAM::NCAssistantBuilder * | CreateNCAssistantBuilder () |
Creates NC Assistant builder. More... | |
NXOpen::CAM::NcmctPartMountingBuilder * | CreateNcmctPartMountingBuilder (const NXString &libRef) |
Creates a Part Mounting Builder. More... | |
NXOpen::CAM::NcmctPartMountingBuilder * | CreateNcmctPartMountingBuilder (const char *libRef) |
Creates a Part Mounting Builder. More... | |
NXOpen::CAM::ObjectNotes * | CreateObjectNotes (NXOpen::CAM::CAMObject *opr) |
Create Notes. More... | |
NXOpen::CAM::ObjectsUdeSet * | CreateObjectsUdeSet (const std::vector< NXOpen::CAM::CAMObject * > ¶ms, NXOpen::CAM::CAMSetup::Ude udeType) |
Create ObjectsUdeSet. More... | |
NXOpen::CAM::ObjectsUdeSet * | CreateObjectsUdeSet (const std::vector< NXOpen::CAM::CAMObject * > ¶ms, NXOpen::CAM::CAMSetup::Ude udeType, const std::vector< NXOpen::CAM::CAMFeature * > &features) |
Create ObjectsUdeSet for features. More... | |
NXOpen::CAM::ObjectWorkInstructionBuilder * | CreateObjectWorkInstructionBuilder (NXOpen::CAM::CAMObject *param) |
Create Object Work Instruction builder for authoring Work Instructions. More... | |
NXOpen::CAM::OperationTeaching * | CreateOperationTeaching (NXOpen::CAM::CAMObject *param) |
Creates a CAM.OperationTeaching. More... | |
NXOpen::CAM::OperationTransformBuilder * | CreateOperationTransformBuilder (const std::vector< NXOpen::CAM::CAMObject * > &objectsToTransform) |
Create Transform builder. More... | |
NXOpen::CAM::PreprocessGeometryBuilder * | CreatePreprocessGeometryBuilder () |
Creates a preprocess geometry builder. More... | |
NXOpen::CAM::SurfaceRegions * | CreateSurfaceRegions (NXOpen::Features::Feature *feature) |
Creates a surface regions builder. More... | |
NXOpen::CAM::ToolPathDivideBuilder * | CreateToolPathDivideBuilder (const std::vector< NXOpen::CAM::CAMObject * > &tpObjectsToDivide) |
Create Tool Path Divide builder. More... | |
NXOpen::CAM::ToolPathSplitBuilder * | CreateToolPathSplitBuilder (const std::vector< NXOpen::CAM::CAMObject * > &tpObjectsToDivide) |
Create Tool Path Split by Holder builder. More... | |
NXOpen::CAM::ToolPathTiltBuilder * | CreateToolPathTiltBuilder (const std::vector< NXOpen::CAM::CAMObject * > &tpObjectsToTilt) |
Create Tool Path Tilt builder. More... | |
NXOpen::CAM::WorkInstructionBuilder * | CreateWorkInstructionBuilder (NXOpen::CAM::CAMObject *param) |
Create Work Instruction builder for authoring Work Instructions. More... | |
NXOpen::CAM::WorkInstructionOutputBuilder * | CreateWorkInstructionOutputBuilder () |
Create Work Instruction Output builder for publishing Work Instructions. More... | |
void | CustomizationUpdateFromObject (NXOpen::CAM::CAMObject *destinationObject, NXOpen::CAM::CAMObject *sourceObject) |
Customize from Object Created in NX7.5.0. More... | |
void | CustomizationUpdateFromTemplate (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Customize from Template Created in NX7.5.0. More... | |
void | CutObjects (NXOpen::CAM::CAMSetup::View view, const std::vector< NXOpen::CAM::CAMObject * > &objectsToBeMoved) |
Cut objects Created in NX4.0.0. More... | |
void | Delete3dWorkpieces (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Delete 3D workpieces of the selected operations Created in NX9.0.0. More... | |
void | DeleteToolPath (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Delete tool path Created in NX4.0.0. More... | |
void | DeleteVnckMachineData () |
Removes vnck machine data Created in NX8.5.0. More... | |
void | DeleteWorkInstructions (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Delete Work Instructions Created in NX9.0.3. More... | |
void | DivideToolPaths (const std::vector< NXOpen::CAM::CAMObject * > &objects, NXOpen::CAM::ToolPathDivideBuilder *builder) |
Tool Path Divide Created in NX4.0.0. More... | |
void | GenerateToolPath (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Generate tool path Created in NX4.0.0. More... | |
NXOpen::CAM::CAMObject * | GetCamExitObject () |
Get the param object which is invoking the exit API. More... | |
NXString | GetMachineLibref () |
Get machine libref. More... | |
NXString | GetPartMaterial () |
Part material. More... | |
void | GetPartMaterialData (NXString *libref, NXString *name, NXString *description, NXString *code, NXString *hardness) |
Get part material data Created in NX8.0.2. More... | |
NXOpen::CAM::NCGroup * | GetRoot (NXOpen::CAM::CAMSetup::View branch) |
Get root of the specified branch. More... | |
void | GougeCheck (const std::vector< NXOpen::CAM::CAMObject * > &objects, bool checkForHolderCollision) |
Gouge Check More... | |
void | GougeCheck (const std::vector< NXOpen::CAM::CAMObject * > &objects, bool checkForHolderCollision, bool useParametric, bool useUserdefStock, double userdefStock) |
Gouge Check Created in NX9.0.0. More... | |
bool | HasSuppressedGeom (NXOpen::CAM::CAMObject *param) |
Check for suppressed geometry. More... | |
bool | IsGroup (NXOpen::CAM::CAMObject *camObject) |
Check if the specified object is a group. More... | |
bool | IsLibrarySetup () |
Returns the flag indicating if this setup is initialized from a library. More... | |
bool | IsOperation (NXOpen::CAM::CAMObject *camobject) |
Check if the specified object is an operation. More... | |
bool | IsToolPathLocked (NXOpen::CAM::CAMObject *object) |
Lock Tool Path. More... | |
NXString | LibraryReference () |
Returns the template library reference Created in NX7.5.3. More... | |
void | ListToolPath (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
List tool path Created in NX4.0.0. More... | |
void | LockToolPaths (const std::vector< NXOpen::CAM::CAMObject * > &objects, bool lock) |
Lock Tool Path Created in NX6.0.0. More... | |
void | MinToolLen (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Minimum tool length Created in NX7.5.0. More... | |
void | MoveObjects (NXOpen::CAM::CAMSetup::View view, const std::vector< NXOpen::CAM::CAMObject * > &objectsToBeMoved, NXOpen::CAM::CAMObject *destinationObject, NXOpen::CAM::CAMSetup::Paste pastePosition) |
Move objects Created in NX4.0.0. More... | |
void | Optimize (const std::vector< NXOpen::CAM::CAMObject * > &objects, bool consolidateTools, bool minimizeToolChanges, bool createOptimizationGroup) |
Optimize Created in NX6.0.0. More... | |
bool | OutputBallCenter () |
Returns the setting for ball center output at posting time Created in NX9.0.1. More... | |
void | OutputClsf (const std::vector< NXOpen::CAM::CAMObject * > &objects, const NXString &clsfFormat, const NXString &outfileName, NXOpen::CAM::CAMSetup::OutputUnits outputUnits) |
Output CLSF Created in NX4.0.0. More... | |
void | OutputClsf (const std::vector< NXOpen::CAM::CAMObject * > &objects, const char *clsfFormat, const char *outfileName, NXOpen::CAM::CAMSetup::OutputUnits outputUnits) |
Output CLSF Created in NX4.0.0. More... | |
void | ParallelCreate3d (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Parallel create 3D Created in NX9.0.1. More... | |
void | ParallelGenerate (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Parallel Generate tool path Created in NX7.5.5. More... | |
void | Postprocess (const std::vector< NXOpen::CAM::CAMObject * > &objects, const NXString &machineType, const NXString &outfileName, NXOpen::CAM::CAMSetup::OutputUnits outputUnits) |
Postprocess Created in NX4.0.0. More... | |
void | Postprocess (const std::vector< NXOpen::CAM::CAMObject * > &objects, const char *machineType, const char *outfileName, NXOpen::CAM::CAMSetup::OutputUnits outputUnits) |
Postprocess Created in NX4.0.0. More... | |
void | PostprocessWithSetting (const std::vector< NXOpen::CAM::CAMObject * > &objects, const NXString &machineType, const NXString &outfileName, NXOpen::CAM::CAMSetup::OutputUnits outputUnits, NXOpen::CAM::CAMSetup::PostprocessSettingsOutputWarning outputWarning, NXOpen::CAM::CAMSetup::PostprocessSettingsReviewTool reviewTool) |
Postprocess Created in NX8.0.0. More... | |
void | PostprocessWithSetting (const std::vector< NXOpen::CAM::CAMObject * > &objects, const char *machineType, const char *outfileName, NXOpen::CAM::CAMSetup::OutputUnits outputUnits, NXOpen::CAM::CAMSetup::PostprocessSettingsOutputWarning outputWarning, NXOpen::CAM::CAMSetup::PostprocessSettingsReviewTool reviewTool) |
Postprocess Created in NX8.0.0. More... | |
void | RemoveDependencies (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Remove dependencies of selected objects Created in NX9.0.0. More... | |
void | RemoveMachine () |
Removes: More... | |
void | RemoveSuppressedGeom (NXOpen::CAM::CAMObject *param) |
Remove suppressed geometry Created in NX5.0.4. More... | |
void | ReplayToolPath (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Replay tool path Created in NX4.0.0. More... | |
void | RestoreDependencies (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Restore dependencies of selected objects Created in NX9.0.0. More... | |
NXOpen::CAM::NCGroup * | RetrieveDevice (const NXString &libRef) |
Retrieve a device from library. More... | |
NXOpen::CAM::NCGroup * | RetrieveDevice (const char *libRef) |
Retrieve a device from library. More... | |
NXOpen::CAM::Tool * | RetrieveTool (const NXString &libRef, bool *success) |
Retrieve a tool from library. More... | |
NXOpen::CAM::Tool * | RetrieveTool (const char *libRef, bool *success) |
Retrieve a tool from library. More... | |
NXOpen::CAM::Tool * | RetrieveTool (const NXString &libRef, NXOpen::CAM::CAMObject *target, NXOpen::CAM::CAMObject **nextTarget, bool *success) |
Retrieve a tool from library to the target. More... | |
NXOpen::CAM::Tool * | RetrieveTool (const char *libRef, NXOpen::CAM::CAMObject *target, NXOpen::CAM::CAMObject **nextTarget, bool *success) |
Retrieve a tool from library to the target. More... | |
void | SetLibraryReference (const NXString &libraryReference) |
Sets the template library reference Created in NX7.5.3. More... | |
void | SetLibraryReference (const char *libraryReference) |
Sets the template library reference Created in NX7.5.3. More... | |
std::vector < NXOpen::CAM::CAMObject::ErrorItem > | SetMachiningData (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Set Machining Data. More... | |
void | SetOutputBallCenter (bool outputBallCenter) |
Sets the setting for ball center output at posting time Created in NX9.0.1. More... | |
void | SetPartMaterial (const NXString &libRef) |
Part material Created in NX8.0.1. More... | |
void | SetPartMaterial (const char *libRef) |
Part material Created in NX8.0.1. More... | |
void | SetTemplateStatus (const std::vector< NXOpen::CAM::CAMObject * > &objects, bool useAsParent, bool createIfParentCreated) |
Set Template status Created in NX6.0.0. More... | |
void | Show2dWorkpiece (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Show 2D workpiece Created in NX4.0.0. More... | |
void | Show2dWorkpieceIn (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Show ingoing 2D workpiece Created in NX5.0.0. More... | |
void | Show2dWorkpieceOut (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Show outgoing 2D workpiece Created in NX5.0.0. More... | |
void | Show3dWorkpiece (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Show 3D workpiece Created in NX4.0.0. More... | |
void | ShowSpinning3dWorkpiece (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Show spinning 3D workpiece Created in NX9.0.1. More... | |
void | SplitToolPaths (const std::vector< NXOpen::CAM::CAMObject * > &objects, NXOpen::CAM::ToolPathSplitBuilder *builder) |
Tool Path Split by Holder Created in NX6.0.0. More... | |
void | SwitchLayerLayout (NXOpen::CAM::CAMObject *object) |
Switch Layer and Layout Created in NX9.0.1. More... | |
void | TiltToolPaths (const std::vector< NXOpen::CAM::CAMObject * > &objects, NXOpen::CAM::ToolPathTiltBuilder *builder) |
Tool Path Tilt Created in NX7.5.0. More... | |
void | TrimToolPath (NXOpen::CAM::OperationBuilder *operationBuilder) |
Interactive Tool Path Trim Created in NX9.0.3. More... | |
void | UnapproveObjects (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Unapprove objects Created in NX7.5.0. More... | |
void | UpdateGeometryDependencies (const std::vector< NXOpen::CAM::CAMObject * > &objects) |
Update geometry dependencies of selected objects Created in NX9.0.0. More... | |
bool | UpdateResourcesOnRule () |
Update Resources (Machine, Tools, Devices) based on assembly loading rule. More... | |
Public Member Functions inherited from NXOpen::CAM::CAMObject | |
bool | AskPathExists () |
Tells if the object has a path. More... | |
NXOpen::CAM::Path * | CreateEmptyPath () |
Create an empty path for the object. More... | |
bool | GetBooleanValue (const NXString &title) |
Get the boolean value of the parameter index from the object. More... | |
bool | GetBooleanValue (const char *title) |
Get the boolean value of the parameter index from the object. More... | |
NXOpen::CAM::CAMObject::FeedRateUnit | GetFeedRate (const NXString &title, double *value) |
Get the feed rate value and unit of the parameter index from the object. More... | |
NXOpen::CAM::CAMObject::FeedRateUnit | GetFeedRate (const char *title, double *value) |
Get the feed rate value and unit of the parameter index from the object. More... | |
int | GetFeedRateColor (const NXString &title) |
Get the feed rate color of the parameter index from the object. More... | |
int | GetFeedRateColor (const char *title) |
Get the feed rate color of the parameter index from the object. More... | |
std::vector< int > | GetIntegerArrayValue (const NXString &title) |
Get the integer array value of the parameter index from the object. More... | |
std::vector< int > | GetIntegerArrayValue (const char *title) |
Get the integer array value of the parameter index from the object. More... | |
int | GetIntegerValue (const NXString &title) |
Get the integer value of the parameter index from the object. More... | |
int | GetIntegerValue (const char *title) |
Get the integer value of the parameter index from the object. More... | |
NXOpen::NXObject * | GetObject (const NXString &title) |
Get the object value of the parameter index from the object. More... | |
NXOpen::NXObject * | GetObject (const char *title) |
Get the object value of the parameter index from the object. More... | |
std::vector< NXOpen::NXObject * > | GetObjectArrayValue (const NXString &title) |
Get the object array value of the parameter index from the object. More... | |
std::vector< NXOpen::NXObject * > | GetObjectArrayValue (const char *title) |
Get the object array value of the parameter index from the object. More... | |
NXOpen::CAM::Path * | GetPath () |
Returns the path. More... | |
std::vector< double > | GetRealArrayValue (const NXString &title) |
Get the real array value of the parameter index from the object. More... | |
std::vector< double > | GetRealArrayValue (const char *title) |
Get the real array value of the parameter index from the object. More... | |
double | GetRealValue (const NXString &title) |
Get the real value of the parameter index from the object. More... | |
double | GetRealValue (const char *title) |
Get the real value of the parameter index from the object. More... | |
NXOpen::CAM::CAMObject::Status | GetStatus () |
Get the status of the input object. More... | |
std::vector< NXString > | GetStringArrayValue (const NXString &title) |
Get the string array value of the parameter index from the object. More... | |
std::vector< NXString > | GetStringArrayValue (const char *title) |
Get the string array value of the parameter index from the object. More... | |
NXString | GetStringValue (const NXString &title) |
Get the string value of the parameter index from the object. More... | |
NXString | GetStringValue (const char *title) |
Get the string value of the parameter index from the object. More... | |
int | GetWireEdmFeedRate (const NXString &title, double *value) |
Get the feed rate value and side of the parameter index from the object, side is only used in wire edm. More... | |
int | GetWireEdmFeedRate (const char *title, double *value) |
Get the feed rate value and side of the parameter index from the object, side is only used in wire edm. More... | |
bool | Has911Attribute (NXOpen::CAM::CAMObject::Attr attrId) |
Check if a 911 attribute exists in an object. More... | |
void | Remove911Attribute (NXOpen::CAM::CAMObject::Attr attrId) |
Remove a specific 911 attribute from an object. More... | |
void | RemoveAll911Attributes () |
Remove all 911 attributes from an object. More... | |
void | SavePath (NXOpen::CAM::Path *theBuilder) |
This must be called to establish proper part status Created in NX11.0.2. More... | |
void | SetBooleanValue (const NXString &title, bool value) |
Set a boolean value to the parameter index for the object. More... | |
void | SetBooleanValue (const char *title, bool value) |
Set a boolean value to the parameter index for the object. More... | |
void | SetFeedRate (const NXString &title, double value, NXOpen::CAM::CAMObject::FeedRateUnit unit) |
Set feed rate value and unit to the parameter index for the object. More... | |
void | SetFeedRate (const char *title, double value, NXOpen::CAM::CAMObject::FeedRateUnit unit) |
Set feed rate value and unit to the parameter index for the object. More... | |
void | SetFeedRateColor (const NXString &title, int value) |
Set feed rate display color to the parameter index for the object. More... | |
void | SetFeedRateColor (const char *title, int value) |
Set feed rate display color to the parameter index for the object. More... | |
void | SetIntegerArrayValue (const NXString &title, const std::vector< int > &value) |
Set integer array value to the parameter index for the object. More... | |
void | SetIntegerArrayValue (const char *title, const std::vector< int > &value) |
Set integer array value to the parameter index for the object. More... | |
void | SetIntegerValue (const NXString &title, int value) |
Set an integer value to the parameter index for the object. More... | |
void | SetIntegerValue (const char *title, int value) |
Set an integer value to the parameter index for the object. More... | |
void | SetObject (const NXString &title, NXOpen::NXObject *value) |
Set a object to the parameter index for the object. More... | |
void | SetObject (const char *title, NXOpen::NXObject *value) |
Set a object to the parameter index for the object. More... | |
void | SetObjectArrayValue (const NXString &title, const std::vector< NXOpen::NXObject * > &value) |
Set object array to the parameter index for the object Created in NX4.0.0. More... | |
void | SetObjectArrayValue (const char *title, const std::vector< NXOpen::NXObject * > &value) |
Set object array to the parameter index for the object Created in NX4.0.0. More... | |
void | SetRealArrayValue (const NXString &title, const std::vector< double > &value) |
Set real array to the parameter index for the object. More... | |
void | SetRealArrayValue (const char *title, const std::vector< double > &value) |
Set real array to the parameter index for the object. More... | |
void | SetRealValue (const NXString &title, double value) |
Set a real value to the parameter index for the object. More... | |
void | SetRealValue (const char *title, double value) |
Set a real value to the parameter index for the object. More... | |
void | SetStringArrayValue (const NXString &title, std::vector< NXString > &value) |
Set string array to the parameter index for the object Created in NX4.0.0. More... | |
void | SetStringArrayValue (const char *title, std::vector< NXString > &value) |
Set string array to the parameter index for the object Created in NX4.0.0. More... | |
void | SetStringValue (const NXString &title, const NXString &value) |
Set a string value to the parameter index for the object. More... | |
void | SetStringValue (const char *title, const char *value) |
Set a string value to the parameter index for the object. More... | |
void | SetWireEdmFeedRate (const NXString &title, double value, int side) |
Set feed rate value and side to the parameter index for the object, side is only used in wire edm. More... | |
void | SetWireEdmFeedRate (const char *title, double value, int side) |
Set feed rate value and side to the parameter index for the object, side is only used in wire edm. More... | |
Public Member Functions inherited from NXOpen::NXObject | |
NXOpen::AttributeIterator * | CreateAttributeIterator () |
Create an attribute iterator. More... | |
void | DeleteAllAttributesByType (NXOpen::NXObject::AttributeType type) |
Deletes all attributes of a specific type. More... | |
void | DeleteAllAttributesByType (NXOpen::NXObject::AttributeType type, NXOpen::Update::Option option) |
Deletes all attributes of a specific type with the option to update or not. More... | |
void | DeleteAttributeByTypeAndTitle (NXOpen::NXObject::AttributeType type, const NXString &title) |
Deletes an attribute by type and title. More... | |
void | DeleteAttributeByTypeAndTitle (NXOpen::NXObject::AttributeType type, const char *title) |
Deletes an attribute by type and title. More... | |
void | DeleteAttributeByTypeAndTitle (NXOpen::NXObject::AttributeType type, const NXString &title, NXOpen::Update::Option option) |
Deletes an attribute by type and title with the option to update or not. More... | |
void | DeleteAttributeByTypeAndTitle (NXOpen::NXObject::AttributeType type, const char *title, NXOpen::Update::Option option) |
Deletes an attribute by type and title with the option to update or not. More... | |
void | DeleteUserAttribute (NXOpen::NXObject::AttributeType type, const NXString &title, bool deleteEntireArray, NXOpen::Update::Option option) |
Deletes the first attribute encountered with the given Type, Title. More... | |
void | DeleteUserAttribute (NXOpen::NXObject::AttributeType type, const char *title, bool deleteEntireArray, NXOpen::Update::Option option) |
Deletes the first attribute encountered with the given Type, Title. More... | |
void | DeleteUserAttributes (NXOpen::AttributeIterator *iterator, NXOpen::Update::Option option) |
Deletes the attributes on the object, if any, that satisfy the given iterator Created in NX8.0.0. More... | |
void | DeleteUserAttributes (NXOpen::NXObject::AttributeType type, NXOpen::Update::Option option) |
Deletes the attributes encountered with the given Type with option to update or not. More... | |
virtual NXOpen::INXObject * | FindObject (const NXString &journalIdentifier) |
Finds the NXOpen::NXObject with the given identifier as recorded in a journal. More... | |
virtual NXOpen::INXObject * | FindObject (const char *journalIdentifier) |
Finds the NXOpen::NXObject with the given identifier as recorded in a journal. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetAttributeTitlesByType (NXOpen::NXObject::AttributeType type) |
Gets all the attribute titles of a specific type. More... | |
bool | GetBooleanUserAttribute (const NXString &title, int index) |
Gets a boolean attribute by Title and array Index. More... | |
bool | GetBooleanUserAttribute (const char *title, int index) |
Gets a boolean attribute by Title and array Index. More... | |
NXOpen::NXObject::ComputationalTime | GetComputationalTimeUserAttribute (const NXString &title, int index) |
Gets a time attribute by Title and array Index. More... | |
NXOpen::NXObject::ComputationalTime | GetComputationalTimeUserAttribute (const char *title, int index) |
Gets a time attribute by Title and array Index. More... | |
int | GetIntegerAttribute (const NXString &title) |
Gets an integer attribute by title. More... | |
int | GetIntegerAttribute (const char *title) |
Gets an integer attribute by title. More... | |
int | GetIntegerUserAttribute (const NXString &title, int index) |
Gets an integer attribute by Title and array Index. More... | |
int | GetIntegerUserAttribute (const char *title, int index) |
Gets an integer attribute by Title and array Index. More... | |
bool | GetNextUserAttribute (NXOpen::AttributeIterator *iterator, NXOpen::NXObject::AttributeInformation *info) |
Gets the next attribute encountered on the object, if any, that satisfies the given iterator. More... | |
NXString | GetPdmReferenceAttributeValue (const NXString &attributeTitle) |
Gets the value of PDM Reference attribute for given object. More... | |
NXString | GetPdmReferenceAttributeValue (const char *attributeTitle) |
Gets the value of PDM Reference attribute for given object. More... | |
double | GetRealAttribute (const NXString &title) |
Gets a real attribute by title. More... | |
double | GetRealAttribute (const char *title) |
Gets a real attribute by title. More... | |
double | GetRealUserAttribute (const NXString &title, int index) |
Gets a real attribute by Title and array Index. More... | |
double | GetRealUserAttribute (const char *title, int index) |
Gets a real attribute by Title and array Index. More... | |
NXString | GetReferenceAttribute (const NXString &title) |
Gets the reference string (not the calculated value) of a string attribute that uses a reference string. More... | |
NXString | GetReferenceAttribute (const char *title) |
Gets the reference string (not the calculated value) of a string attribute that uses a reference string. More... | |
NXString | GetStringAttribute (const NXString &title) |
Gets a string attribute value by title. More... | |
NXString | GetStringAttribute (const char *title) |
Gets a string attribute value by title. More... | |
NXString | GetStringUserAttribute (const NXString &title, int index) |
Gets a string attribute by Title and array Index. More... | |
NXString | GetStringUserAttribute (const char *title, int index) |
Gets a string attribute by Title and array Index. More... | |
NXString | GetTimeAttribute (NXOpen::NXObject::DateAndTimeFormat format, const NXString &title) |
Gets a time attribute by title. More... | |
NXString | GetTimeAttribute (NXOpen::NXObject::DateAndTimeFormat format, const char *title) |
Gets a time attribute by title. More... | |
NXString | GetTimeUserAttribute (const NXString &title, int index) |
Gets a time attribute by Title and array Index. More... | |
NXString | GetTimeUserAttribute (const char *title, int index) |
Gets a time attribute by Title and array Index. More... | |
NXOpen::NXObject::AttributeInformation | GetUserAttribute (const NXString &title, NXOpen::NXObject::AttributeType type, int index) |
Gets the first attribute encountered on the object, if any, with a given Title, Type and array Index. More... | |
NXOpen::NXObject::AttributeInformation | GetUserAttribute (const char *title, NXOpen::NXObject::AttributeType type, int index) |
Gets the first attribute encountered on the object, if any, with a given Title, Type and array Index. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetUserAttribute (const NXString &title, bool includeUnset, bool addStringValues, NXOpen::NXObject::AttributeType type) |
Gets the first attribute (or attribute array) encountered on the object, if any, with a given Title and Type. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetUserAttribute (const char *title, bool includeUnset, bool addStringValues, NXOpen::NXObject::AttributeType type) |
Gets the first attribute (or attribute array) encountered on the object, if any, with a given Title and Type. More... | |
NXString | GetUserAttributeAsString (const NXString &title, NXOpen::NXObject::AttributeType type, int index) |
Gets the first attribute encountered on the object, if any, with a given title, type and array index. More... | |
NXString | GetUserAttributeAsString (const char *title, NXOpen::NXObject::AttributeType type, int index) |
Gets the first attribute encountered on the object, if any, with a given title, type and array index. More... | |
int | GetUserAttributeCount (NXOpen::AttributeIterator *iterator) |
Gets the count of set attributes on the object, if any, that satisfy the given iterator. More... | |
int | GetUserAttributeCount (NXOpen::AttributeIterator *iterator, bool countArrayAsOneAttribute) |
Gets the count of set attributes on the object, if any, that satisfy the given iterator. More... | |
int | GetUserAttributeCount (NXOpen::NXObject::AttributeType type) |
Gets the count of set attributes on the object, if any, of the given type. More... | |
int | GetUserAttributeCount (NXOpen::NXObject::AttributeType type, bool includeUnset, bool countArrayAsOneAttribute) |
Gets the count of attributes on the object, if any, of the given type. More... | |
bool | GetUserAttributeLock (const NXString &title, NXOpen::NXObject::AttributeType type) |
Determine the lock of the given attribute. More... | |
bool | GetUserAttributeLock (const char *title, NXOpen::NXObject::AttributeType type) |
Determine the lock of the given attribute. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetUserAttributes (NXOpen::AttributeIterator *iterator) |
Gets all the attributes that have been set on the given object, if any, that satisfy the given iterator. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetUserAttributes () |
Gets all the attributes that have been set on the given object. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetUserAttributes (bool includeUnset) |
Gets all the attributes of the given object. More... | |
std::vector < NXOpen::NXObject::AttributeInformation > | GetUserAttributes (bool includeUnset, bool addStringValues) |
Gets all the attributes of the given object. More... | |
std::vector< NXString > | GetUserAttributesAsStrings () |
Gets all the attributes that have been set on the given object. More... | |
int | GetUserAttributeSize (const NXString &title, NXOpen::NXObject::AttributeType type) |
Gets the size of the first attribute encountered on the object, if any, with a given Title and Type. More... | |
int | GetUserAttributeSize (const char *title, NXOpen::NXObject::AttributeType type) |
Gets the size of the first attribute encountered on the object, if any, with a given Title and Type. More... | |
std::vector< NXOpen::NXObject * > | GetUserAttributeSourceObjects () |
Returns an array of objects from which this object presents attributes. More... | |
bool | HasUserAttribute (NXOpen::AttributeIterator *iterator) |
Determines if an attribute exists on the object, that satisfies the given iterator. More... | |
bool | HasUserAttribute (const NXString &title, NXOpen::NXObject::AttributeType type, int index) |
Determines if an attribute with the given Title, Type and array Index is present on the object Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object. More... | |
bool | HasUserAttribute (const char *title, NXOpen::NXObject::AttributeType type, int index) |
Determines if an attribute with the given Title, Type and array Index is present on the object Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object. More... | |
virtual bool | IsOccurrence () |
Returns whether this object is an occurrence or not. More... | |
virtual NXString | JournalIdentifier () |
Returns the identifier that would be recorded in a journal for this object. More... | |
virtual NXString | Name () |
Returns the custom name of the object. More... | |
virtual NXOpen::Assemblies::Component * | OwningComponent () |
Returns the owning component, if this object is an occurrence. More... | |
virtual NXOpen::BasePart * | OwningPart () |
Returns the owning part of this object Created in NX3.0.0. More... | |
virtual void | Print () |
Prints a representation of this object to the system log file. More... | |
virtual NXOpen::INXObject * | Prototype () |
Returns the prototype of this object if it is an occurrence. More... | |
void | SetAttribute (const NXString &title, int value) |
Creates or modifies an integer attribute. More... | |
void | SetAttribute (const char *title, int value) |
Creates or modifies an integer attribute. More... | |
void | SetAttribute (const NXString &title, int value, NXOpen::Update::Option option) |
Creates or modifies an integer attribute with the option to update or not. More... | |
void | SetAttribute (const char *title, int value, NXOpen::Update::Option option) |
Creates or modifies an integer attribute with the option to update or not. More... | |
void | SetAttribute (const NXString &title, double value) |
Creates or modifies a real attribute. More... | |
void | SetAttribute (const char *title, double value) |
Creates or modifies a real attribute. More... | |
void | SetAttribute (const NXString &title, double value, NXOpen::Update::Option option) |
Creates or modifies a real attribute with the option to update or not. More... | |
void | SetAttribute (const char *title, double value, NXOpen::Update::Option option) |
Creates or modifies a real attribute with the option to update or not. More... | |
void | SetAttribute (const NXString &title, const NXString &value) |
Creates or modifies a string attribute. More... | |
void | SetAttribute (const char *title, const char *value) |
Creates or modifies a string attribute. More... | |
void | SetAttribute (const NXString &title, const NXString &value, NXOpen::Update::Option option) |
Creates or modifies a string attribute with the option to update or not. More... | |
void | SetAttribute (const char *title, const char *value, NXOpen::Update::Option option) |
Creates or modifies a string attribute with the option to update or not. More... | |
void | SetAttribute (const NXString &title) |
Creates or modifies a null attribute which is an attribute with a title and no value. More... | |
void | SetAttribute (const char *title) |
Creates or modifies a null attribute which is an attribute with a title and no value. More... | |
void | SetAttribute (const NXString &title, NXOpen::Update::Option option) |
Creates or modifies a null attribute with the option to update or not. More... | |
void | SetAttribute (const char *title, NXOpen::Update::Option option) |
Creates or modifies a null attribute with the option to update or not. More... | |
void | SetBooleanUserAttribute (const NXString &title, int index, bool value, NXOpen::Update::Option option) |
Creates or modifies a boolean attribute with the option to update or not. More... | |
void | SetBooleanUserAttribute (const char *title, int index, bool value, NXOpen::Update::Option option) |
Creates or modifies a boolean attribute with the option to update or not. More... | |
virtual void | SetName (const NXString &name) |
Sets the custom name of the object. More... | |
virtual void | SetName (const char *name) |
Sets the custom name of the object. More... | |
void | SetPdmReferenceAttribute (const NXString &attributeTitle, const NXString &attributeValue) |
Sets the value of PDM Reference attribute on the object. More... | |
void | SetPdmReferenceAttribute (const char *attributeTitle, const char *attributeValue) |
Sets the value of PDM Reference attribute on the object. More... | |
void | SetReferenceAttribute (const NXString &title, const NXString &value) |
Creates or modifies a string attribute which uses a reference string. More... | |
void | SetReferenceAttribute (const char *title, const char *value) |
Creates or modifies a string attribute which uses a reference string. More... | |
void | SetReferenceAttribute (const NXString &title, const NXString &value, NXOpen::Update::Option option) |
Creates or modifies a string attribute which uses a reference string, with the option to update or not. More... | |
void | SetReferenceAttribute (const char *title, const char *value, NXOpen::Update::Option option) |
Creates or modifies a string attribute which uses a reference string, with the option to update or not. More... | |
void | SetTimeAttribute (const NXString &title, const NXString &value) |
Creates or modifies a time attribute. More... | |
void | SetTimeAttribute (const char *title, const char *value) |
Creates or modifies a time attribute. More... | |
void | SetTimeAttribute (const NXString &title, const NXString &value, NXOpen::Update::Option option) |
Creates or modifies a time attribute with the option to update or not. More... | |
void | SetTimeAttribute (const char *title, const char *value, NXOpen::Update::Option option) |
Creates or modifies a time attribute with the option to update or not. More... | |
void | SetTimeUserAttribute (const NXString &title, int index, const NXString &value, NXOpen::Update::Option option) |
Creates or modifies a time attribute with the option to update or not. More... | |
void | SetTimeUserAttribute (const char *title, int index, const char *value, NXOpen::Update::Option option) |
Creates or modifies a time attribute with the option to update or not. More... | |
void | SetTimeUserAttribute (const NXString &title, int index, const NXOpen::NXObject::ComputationalTime &value, NXOpen::Update::Option option) |
Creates or modifies a time attribute with the option to update or not. More... | |
void | SetTimeUserAttribute (const char *title, int index, const NXOpen::NXObject::ComputationalTime &value, NXOpen::Update::Option option) |
Creates or modifies a time attribute with the option to update or not. More... | |
void | SetUserAttribute (const NXOpen::NXObject::AttributeInformation &info, NXOpen::Update::Option option) |
Creates or modifies an attribute with the option to update or not. More... | |
void | SetUserAttribute (const NXString &title, int index, int value, NXOpen::Update::Option option) |
Creates or modifies an integer attribute with the option to update or not. More... | |
void | SetUserAttribute (const char *title, int index, int value, NXOpen::Update::Option option) |
Creates or modifies an integer attribute with the option to update or not. More... | |
void | SetUserAttribute (const NXString &title, int index, double value, NXOpen::Update::Option option) |
Creates or modifies a real attribute with the option to update or not. More... | |
void | SetUserAttribute (const char *title, int index, double value, NXOpen::Update::Option option) |
Creates or modifies a real attribute with the option to update or not. More... | |
void | SetUserAttribute (const NXString &title, int index, const NXString &value, NXOpen::Update::Option option) |
Creates or modifies a string attribute with the option to update or not. More... | |
void | SetUserAttribute (const char *title, int index, const char *value, NXOpen::Update::Option option) |
Creates or modifies a string attribute with the option to update or not. More... | |
void | SetUserAttribute (const NXString &title, int index, NXOpen::Update::Option option) |
Creates or modifies a null attribute with the option to update or not. More... | |
void | SetUserAttribute (const char *title, int index, NXOpen::Update::Option option) |
Creates or modifies a null attribute with the option to update or not. More... | |
void | SetUserAttributeLock (const NXString &title, NXOpen::NXObject::AttributeType type, bool lock) |
Lock or unlock the given attribute. More... | |
void | SetUserAttributeLock (const char *title, NXOpen::NXObject::AttributeType type, bool lock) |
Lock or unlock the given attribute. More... | |
Public Member Functions inherited from NXOpen::TaggedObject | |
tag_t | Tag () const |
Returns the tag of this object. More... | |
cam setup
To obtain an instance of this class, use NXOpen::Part::CAMSetup
Created in NX4.0.0.
void NXOpen::CAM::CAMSetup::ApproveObjects | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Approve objects
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::BufferObjects | ( | NXOpen::CAM::CAMSetup::View | view, |
const std::vector< NXOpen::CAM::CAMObject * > & | objectsToBeBuffered | ||
) |
Buffer objects to the clipboard and prepare for copy later
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
view | view |
objectsToBeBuffered | array of objects to be buffered |
NXOpen::CAM::NCGroupCollection* NXOpen::CAM::CAMSetup::CAMGroupCollection | ( | ) |
Returns the NCGroupCollection instance belonging to this setup
Created in NX3.0.0.
NXOpen::CAM::OperationCollection* NXOpen::CAM::CAMSetup::CAMOperationCollection | ( | ) |
Returns the OperationCollection instance belonging to this setup
Created in NX3.0.0.
void NXOpen::CAM::CAMSetup::CopyFromComponent | ( | ) |
Copy From Component.
Created in NX11.0.1.
License requirements : cam_base ("CAM BASE")
std::vector<NXOpen::CAM::CAMObject *> NXOpen::CAM::CAMSetup::CopyObjects | ( | NXOpen::CAM::CAMSetup::View | view, |
const std::vector< NXOpen::CAM::CAMObject * > & | objectsToBeMoved, | ||
NXOpen::CAM::CAMObject * | destinationObject, | ||
NXOpen::CAM::CAMSetup::Paste | pastePosition | ||
) |
Copy objects.
view | view |
objectsToBeMoved | array of objects to be moved |
destinationObject | the destination object |
pastePosition | paste inside or after the destination object |
std::vector<NXOpen::CAM::CAMObject *> NXOpen::CAM::CAMSetup::CopyObjectsWithReference | ( | NXOpen::CAM::CAMSetup::View | view, |
const std::vector< NXOpen::CAM::CAMObject * > & | objectsToBeMoved, | ||
NXOpen::CAM::CAMObject * | destinationObject, | ||
NXOpen::CAM::CAMSetup::Paste | pastePosition | ||
) |
Copy objects with reference.
view | view |
objectsToBeMoved | array of objects to be moved |
destinationObject | the destination object |
pastePosition | paste inside or after the destination object |
NXOpen::CAM::CutDepthChecker* NXOpen::CAM::CAMSetup::CreateCutDepthChecker | ( | ) |
Creates a Cut Depth Checker.
Note: Commit will not return an object
NXOpen::CAM::FeatureProcessBuilder* NXOpen::CAM::CAMSetup::CreateFeatureProcessBuilder | ( | ) |
Creates a CAM.FeatureProcessBuilder.
NXOpen::CAM::FeatureRecognitionBuilder* NXOpen::CAM::CAMSetup::CreateFeatureRecognitionBuilder | ( | NXOpen::CAM::CAMObject * | param | ) |
Creates a CAM.FeatureRecognitionBuilder.
param | not used |
NXOpen::CAM::FeatureTeaching* NXOpen::CAM::CAMSetup::CreateFeatureTeaching | ( | NXOpen::CAM::CAMObject * | param | ) |
Creates a CAM.FeatureTeaching.
param | not used |
NXOpen::CAM::ObjectsFeedsBuilder* NXOpen::CAM::CAMSetup::CreateFeedsBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | params | ) |
Create Feeds builder.
params | array of objects |
NXOpen::CAM::FeedsOptimizeBuilder* NXOpen::CAM::CAMSetup::CreateFeedsOptimizeBuilder | ( | NXOpen::CAM::CAMObject * | param | ) |
Creates a feeds optimize builder.
param | the object to be edited |
NXOpen::CAM::GougeCheckBuilder* NXOpen::CAM::CAMSetup::CreateGougeCheckBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Create Gouge Check builder.
objects | array of objects |
NXOpen::CAM::MirrorBuilder* NXOpen::CAM::CAMSetup::CreateMirrorBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objectsToMirror | ) |
Create Mirror builder.
objectsToMirror | array of objects to mirror |
NXOpen::CAM::NCAssistantBuilder* NXOpen::CAM::CAMSetup::CreateNCAssistantBuilder | ( | ) |
Creates NC Assistant builder.
NXOpen::CAM::NcmctPartMountingBuilder* NXOpen::CAM::CAMSetup::CreateNcmctPartMountingBuilder | ( | const NXString & | libRef | ) |
Creates a Part Mounting Builder.
Note: Commit a Part Mounting Builder will perform the Part Mounting and no object is returned.
libRef | a unique library reference identifier |
NXOpen::CAM::NcmctPartMountingBuilder* NXOpen::CAM::CAMSetup::CreateNcmctPartMountingBuilder | ( | const char * | libRef | ) |
Creates a Part Mounting Builder.
Note: Commit a Part Mounting Builder will perform the Part Mounting and no object is returned.
libRef | a unique library reference identifier |
NXOpen::CAM::ObjectNotes* NXOpen::CAM::CAMSetup::CreateObjectNotes | ( | NXOpen::CAM::CAMObject * | opr | ) |
Create Notes.
opr | opr |
NXOpen::CAM::ObjectsUdeSet* NXOpen::CAM::CAMSetup::CreateObjectsUdeSet | ( | const std::vector< NXOpen::CAM::CAMObject * > & | params, |
NXOpen::CAM::CAMSetup::Ude | udeType | ||
) |
Create ObjectsUdeSet.
params | array of operations or groups |
udeType | ude type |
NXOpen::CAM::ObjectsUdeSet* NXOpen::CAM::CAMSetup::CreateObjectsUdeSet | ( | const std::vector< NXOpen::CAM::CAMObject * > & | params, |
NXOpen::CAM::CAMSetup::Ude | udeType, | ||
const std::vector< NXOpen::CAM::CAMFeature * > & | features | ||
) |
Create ObjectsUdeSet for features.
params | array of operations |
udeType | ude type |
features | array of features |
NXOpen::CAM::ObjectWorkInstructionBuilder* NXOpen::CAM::CAMSetup::CreateObjectWorkInstructionBuilder | ( | NXOpen::CAM::CAMObject * | param | ) |
Create Object Work Instruction builder for authoring Work Instructions.
param | param |
NXOpen::CAM::OperationTeaching* NXOpen::CAM::CAMSetup::CreateOperationTeaching | ( | NXOpen::CAM::CAMObject * | param | ) |
Creates a CAM.OperationTeaching.
param | not used |
NXOpen::CAM::OperationTransformBuilder* NXOpen::CAM::CAMSetup::CreateOperationTransformBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objectsToTransform | ) |
Create Transform builder.
Note: Commit a Transform Builder will apply a transformation.
objectsToTransform | array of objects to transform |
NXOpen::CAM::PreprocessGeometryBuilder* NXOpen::CAM::CAMSetup::CreatePreprocessGeometryBuilder | ( | ) |
Creates a preprocess geometry builder.
NXOpen::CAM::SurfaceRegions* NXOpen::CAM::CAMSetup::CreateSurfaceRegions | ( | NXOpen::Features::Feature * | feature | ) |
Creates a surface regions builder.
feature | Feature to be edited |
NXOpen::CAM::ToolPathDivideBuilder* NXOpen::CAM::CAMSetup::CreateToolPathDivideBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | tpObjectsToDivide | ) |
Create Tool Path Divide builder.
tpObjectsToDivide | array of objects to divide |
NXOpen::CAM::ToolPathSplitBuilder* NXOpen::CAM::CAMSetup::CreateToolPathSplitBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | tpObjectsToDivide | ) |
Create Tool Path Split by Holder builder.
tpObjectsToDivide | array of objects to divide |
NXOpen::CAM::ToolPathTiltBuilder* NXOpen::CAM::CAMSetup::CreateToolPathTiltBuilder | ( | const std::vector< NXOpen::CAM::CAMObject * > & | tpObjectsToTilt | ) |
Create Tool Path Tilt builder.
tpObjectsToTilt | array of objects to tilt |
NXOpen::CAM::WorkInstructionBuilder* NXOpen::CAM::CAMSetup::CreateWorkInstructionBuilder | ( | NXOpen::CAM::CAMObject * | param | ) |
Create Work Instruction builder for authoring Work Instructions.
param | param |
NXOpen::CAM::WorkInstructionOutputBuilder* NXOpen::CAM::CAMSetup::CreateWorkInstructionOutputBuilder | ( | ) |
Create Work Instruction Output builder for publishing Work Instructions.
void NXOpen::CAM::CAMSetup::CustomizationUpdateFromObject | ( | NXOpen::CAM::CAMObject * | destinationObject, |
NXOpen::CAM::CAMObject * | sourceObject | ||
) |
Customize from Object
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
destinationObject | destination object for customization |
sourceObject | source object for customization |
void NXOpen::CAM::CAMSetup::CustomizationUpdateFromTemplate | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Customize from Template
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
objects | destination objects for customization |
void NXOpen::CAM::CAMSetup::CutObjects | ( | NXOpen::CAM::CAMSetup::View | view, |
const std::vector< NXOpen::CAM::CAMObject * > & | objectsToBeMoved | ||
) |
Cut objects
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
view | view |
objectsToBeMoved | array of objects to be moved |
void NXOpen::CAM::CAMSetup::Delete3dWorkpieces | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Delete 3D workpieces of the selected operations
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of operations |
void NXOpen::CAM::CAMSetup::DeleteToolPath | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Delete tool path
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::DeleteVnckMachineData | ( | ) |
Removes vnck machine data
Created in NX8.5.0.
License requirements : cam_base ("CAM BASE")
void NXOpen::CAM::CAMSetup::DeleteWorkInstructions | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Delete Work Instructions
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::DivideToolPaths | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
NXOpen::CAM::ToolPathDivideBuilder * | builder | ||
) |
Tool Path Divide
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
builder | builder containing split parameters |
void NXOpen::CAM::CAMSetup::GenerateToolPath | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Generate tool path
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
NXOpen::CAM::CAMObject* NXOpen::CAM::CAMSetup::GetCamExitObject | ( | ) |
Get the param object which is invoking the exit API.
NXString NXOpen::CAM::CAMSetup::GetMachineLibref | ( | ) |
Get machine libref.
NXString NXOpen::CAM::CAMSetup::GetPartMaterial | ( | ) |
Part material.
void NXOpen::CAM::CAMSetup::GetPartMaterialData | ( | NXString * | libref, |
NXString * | name, | ||
NXString * | description, | ||
NXString * | code, | ||
NXString * | hardness | ||
) |
Get part material data
Created in NX8.0.2.
License requirements : None
libref | libref |
name | name |
description | description |
code | code |
hardness | hardness |
NXOpen::CAM::NCGroup* NXOpen::CAM::CAMSetup::GetRoot | ( | NXOpen::CAM::CAMSetup::View | branch | ) |
Get root of the specified branch.
branch | branch from which to get setup root |
void NXOpen::CAM::CAMSetup::GougeCheck | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
bool | checkForHolderCollision | ||
) |
Gouge Check
Use new version with additional arguments instead.
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects to do gouge checking |
checkForHolderCollision | check for tool holder collision |
void NXOpen::CAM::CAMSetup::GougeCheck | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
bool | checkForHolderCollision, | ||
bool | useParametric, | ||
bool | useUserdefStock, | ||
double | userdefStock | ||
) |
Gouge Check
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects to do gouge checking |
checkForHolderCollision | check for tool holder collision |
useParametric | use parametric tool shape |
useUserdefStock | use user defined stock |
userdefStock | user defined stock |
bool NXOpen::CAM::CAMSetup::HasSuppressedGeom | ( | NXOpen::CAM::CAMObject * | param | ) |
Check for suppressed geometry.
param | object to test |
bool NXOpen::CAM::CAMSetup::IsGroup | ( | NXOpen::CAM::CAMObject * | camObject | ) |
Check if the specified object is a group.
camObject | camobject |
bool NXOpen::CAM::CAMSetup::IsLibrarySetup | ( | ) |
Returns the flag indicating if this setup is initialized from a library.
Created in NX7.5.3.
License requirements : None
bool NXOpen::CAM::CAMSetup::IsOperation | ( | NXOpen::CAM::CAMObject * | camobject | ) |
Check if the specified object is an operation.
camobject | camobject |
bool NXOpen::CAM::CAMSetup::IsToolPathLocked | ( | NXOpen::CAM::CAMObject * | object | ) |
Lock Tool Path.
object | object whose tool path is checked |
NXString NXOpen::CAM::CAMSetup::LibraryReference | ( | ) |
Returns the template library reference
Created in NX7.5.3.
License requirements : None
void NXOpen::CAM::CAMSetup::ListToolPath | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
List tool path
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::LockToolPaths | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
bool | lock | ||
) |
Lock Tool Path
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
lock | lock the tool path if true, else unlock the tool path |
void NXOpen::CAM::CAMSetup::MinToolLen | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Minimum tool length
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::MoveObjects | ( | NXOpen::CAM::CAMSetup::View | view, |
const std::vector< NXOpen::CAM::CAMObject * > & | objectsToBeMoved, | ||
NXOpen::CAM::CAMObject * | destinationObject, | ||
NXOpen::CAM::CAMSetup::Paste | pastePosition | ||
) |
Move objects
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
view | view |
objectsToBeMoved | array of objects to be moved |
destinationObject | the destination object |
pastePosition | paste inside or after the destination object |
void NXOpen::CAM::CAMSetup::Optimize | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
bool | consolidateTools, | ||
bool | minimizeToolChanges, | ||
bool | createOptimizationGroup | ||
) |
Optimize
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects to optimize |
consolidateTools | consolidate tools |
minimizeToolChanges | minimize tool changes |
createOptimizationGroup | create optimization group |
bool NXOpen::CAM::CAMSetup::OutputBallCenter | ( | ) |
Returns the setting for ball center output at posting time
Created in NX9.0.1.
License requirements : None
void NXOpen::CAM::CAMSetup::OutputClsf | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
const NXString & | clsfFormat, | ||
const NXString & | outfileName, | ||
NXOpen::CAM::CAMSetup::OutputUnits | outputUnits | ||
) |
Output CLSF
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
clsfFormat | clsf format |
outfileName | output file name |
outputUnits | output file unit |
void NXOpen::CAM::CAMSetup::OutputClsf | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
const char * | clsfFormat, | ||
const char * | outfileName, | ||
NXOpen::CAM::CAMSetup::OutputUnits | outputUnits | ||
) |
Output CLSF
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
clsfFormat | clsf format |
outfileName | output file name |
outputUnits | output file unit |
void NXOpen::CAM::CAMSetup::ParallelCreate3d | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Parallel create 3D
Created in NX9.0.1.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::ParallelGenerate | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Parallel Generate tool path
Created in NX7.5.5.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::Postprocess | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
const NXString & | machineType, | ||
const NXString & | outfileName, | ||
NXOpen::CAM::CAMSetup::OutputUnits | outputUnits | ||
) |
Postprocess
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
machineType | machine type |
outfileName | output file name |
outputUnits | output file unit |
void NXOpen::CAM::CAMSetup::Postprocess | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
const char * | machineType, | ||
const char * | outfileName, | ||
NXOpen::CAM::CAMSetup::OutputUnits | outputUnits | ||
) |
Postprocess
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
machineType | machine type |
outfileName | output file name |
outputUnits | output file unit |
void NXOpen::CAM::CAMSetup::PostprocessWithSetting | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
const NXString & | machineType, | ||
const NXString & | outfileName, | ||
NXOpen::CAM::CAMSetup::OutputUnits | outputUnits, | ||
NXOpen::CAM::CAMSetup::PostprocessSettingsOutputWarning | outputWarning, | ||
NXOpen::CAM::CAMSetup::PostprocessSettingsReviewTool | reviewTool | ||
) |
Postprocess
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
machineType | machine type |
outfileName | output file name |
outputUnits | output file unit |
outputWarning | whether ouput warning file |
reviewTool | whether active review tool window |
void NXOpen::CAM::CAMSetup::PostprocessWithSetting | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
const char * | machineType, | ||
const char * | outfileName, | ||
NXOpen::CAM::CAMSetup::OutputUnits | outputUnits, | ||
NXOpen::CAM::CAMSetup::PostprocessSettingsOutputWarning | outputWarning, | ||
NXOpen::CAM::CAMSetup::PostprocessSettingsReviewTool | reviewTool | ||
) |
Postprocess
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
machineType | machine type |
outfileName | output file name |
outputUnits | output file unit |
outputWarning | whether ouput warning file |
reviewTool | whether active review tool window |
void NXOpen::CAM::CAMSetup::RemoveDependencies | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Remove dependencies of selected objects
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::RemoveMachine | ( | ) |
Removes:
Created in NX8.5.0.
License requirements : cam_base ("CAM BASE")
void NXOpen::CAM::CAMSetup::RemoveSuppressedGeom | ( | NXOpen::CAM::CAMObject * | param | ) |
Remove suppressed geometry
Created in NX5.0.4.
License requirements : cam_base ("CAM BASE")
param | object to operate on |
void NXOpen::CAM::CAMSetup::ReplayToolPath | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Replay tool path
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::RestoreDependencies | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Restore dependencies of selected objects
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
NXOpen::CAM::NCGroup* NXOpen::CAM::CAMSetup::RetrieveDevice | ( | const NXString & | libRef | ) |
Retrieve a device from library.
libRef | a unique library reference identifier |
NXOpen::CAM::NCGroup* NXOpen::CAM::CAMSetup::RetrieveDevice | ( | const char * | libRef | ) |
Retrieve a device from library.
libRef | a unique library reference identifier |
NXOpen::CAM::Tool* NXOpen::CAM::CAMSetup::RetrieveTool | ( | const NXString & | libRef, |
bool * | success | ||
) |
Retrieve a tool from library.
libRef | the library name |
success | success |
NXOpen::CAM::Tool* NXOpen::CAM::CAMSetup::RetrieveTool | ( | const char * | libRef, |
bool * | success | ||
) |
Retrieve a tool from library.
libRef | the library name |
success | success |
NXOpen::CAM::Tool* NXOpen::CAM::CAMSetup::RetrieveTool | ( | const NXString & | libRef, |
NXOpen::CAM::CAMObject * | target, | ||
NXOpen::CAM::CAMObject ** | nextTarget, | ||
bool * | success | ||
) |
Retrieve a tool from library to the target.
libRef | the library name |
target | the target where the tool is mounted |
nextTarget | the next target where the tool can be mounted |
success | success |
NXOpen::CAM::Tool* NXOpen::CAM::CAMSetup::RetrieveTool | ( | const char * | libRef, |
NXOpen::CAM::CAMObject * | target, | ||
NXOpen::CAM::CAMObject ** | nextTarget, | ||
bool * | success | ||
) |
Retrieve a tool from library to the target.
libRef | the library name |
target | the target where the tool is mounted |
nextTarget | the next target where the tool can be mounted |
success | success |
void NXOpen::CAM::CAMSetup::SetLibraryReference | ( | const NXString & | libraryReference | ) |
Sets the template library reference
Created in NX7.5.3.
License requirements : cam_base ("CAM BASE")
libraryReference | libraryreference |
void NXOpen::CAM::CAMSetup::SetLibraryReference | ( | const char * | libraryReference | ) |
Sets the template library reference
Created in NX7.5.3.
License requirements : cam_base ("CAM BASE")
libraryReference | libraryreference |
std::vector<NXOpen::CAM::CAMObject::ErrorItem> NXOpen::CAM::CAMSetup::SetMachiningData | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Set Machining Data.
objects | array of objects |
void NXOpen::CAM::CAMSetup::SetOutputBallCenter | ( | bool | outputBallCenter | ) |
Sets the setting for ball center output at posting time
Created in NX9.0.1.
License requirements : cam_base ("CAM BASE")
outputBallCenter | outputballcenter |
void NXOpen::CAM::CAMSetup::SetPartMaterial | ( | const NXString & | libRef | ) |
Part material
Created in NX8.0.1.
License requirements : cam_base ("CAM BASE")
libRef | libref |
void NXOpen::CAM::CAMSetup::SetPartMaterial | ( | const char * | libRef | ) |
Part material
Created in NX8.0.1.
License requirements : cam_base ("CAM BASE")
libRef | libref |
void NXOpen::CAM::CAMSetup::SetTemplateStatus | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
bool | useAsParent, | ||
bool | createIfParentCreated | ||
) |
Set Template status
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects to adjust |
useAsParent | object can be used as a template or not |
createIfParentCreated | create if parent is created |
void NXOpen::CAM::CAMSetup::Show2dWorkpiece | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Show 2D workpiece
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::Show2dWorkpieceIn | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Show ingoing 2D workpiece
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::Show2dWorkpieceOut | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Show outgoing 2D workpiece
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::Show3dWorkpiece | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Show 3D workpiece
Created in NX4.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::ShowSpinning3dWorkpiece | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Show spinning 3D workpiece
Created in NX9.0.1.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::SplitToolPaths | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
NXOpen::CAM::ToolPathSplitBuilder * | builder | ||
) |
Tool Path Split by Holder
Created in NX6.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
builder | builder containing split parameters |
void NXOpen::CAM::CAMSetup::SwitchLayerLayout | ( | NXOpen::CAM::CAMObject * | object | ) |
Switch Layer and Layout
Created in NX9.0.1.
License requirements : cam_base ("CAM BASE")
object | the object for which the layer and layout has to be switched |
void NXOpen::CAM::CAMSetup::TiltToolPaths | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects, |
NXOpen::CAM::ToolPathTiltBuilder * | builder | ||
) |
Tool Path Tilt
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
builder | builder containing tilt parameters |
void NXOpen::CAM::CAMSetup::TrimToolPath | ( | NXOpen::CAM::OperationBuilder * | operationBuilder | ) |
Interactive Tool Path Trim
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
operationBuilder | operationbuilder |
void NXOpen::CAM::CAMSetup::UnapproveObjects | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Unapprove objects
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
void NXOpen::CAM::CAMSetup::UpdateGeometryDependencies | ( | const std::vector< NXOpen::CAM::CAMObject * > & | objects | ) |
Update geometry dependencies of selected objects
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
objects | array of objects |
bool NXOpen::CAM::CAMSetup::UpdateResourcesOnRule | ( | ) |
Update Resources (Machine, Tools, Devices) based on assembly loading rule.