VentilationHoles2Builder Class¶
-
class
NXOpen.Features.ShipDesign.
VentilationHoles2Builder
¶ Bases:
NXOpen.Features.FeatureBuilder
Represents a
NXOpen.Features.ShipDesign.VentilationHoles2
builderTo create a new instance of this class, use
NXOpen.Features.ShipCollection.CreateVentilationHoles2Builder()
Default values.
Property Value AngularDimOffset.Value 0 EnumSpacing EvenDistribution GuideOffset.Value 0 (millimeters part), 0 (inches part) IntNumVents 0 ToggleSymmetricOffsets 0 VentSpacing.Value 0 (millimeters part), 0 (inches part) New in version NX8.0.0.
Properties¶
Property | Description |
---|---|
AngularDimOffset | Returns the angular dim offset |
EnumSpacing | Returns or sets the enum spacing |
GuideOffset | Returns the guide offset |
IntNumVents | Returns or sets the int num vents |
OnPathEndOffset | Returns the on path end offset |
OnPathStartOffset | Returns the on path start offset |
ParentFeatureInternal | Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal |
PatchSolutionFlag | Returns or sets the patch solution flag |
PatchSurfaceFilename | Returns or sets the patch surface filename |
SectionGuide | Returns the section guide |
SelectEndTrim | Returns the select end trim |
SelectStartTrim | Returns the select start trim |
SelectTargetFace | Returns the select target face |
SketchBlock | Returns the sketch block. |
SurroundingPatchSurfaceFilename | Returns or sets the surrounding patch surface filename |
Tag | Returns the Tag for this object. |
ToggleSymmetricOffsets | Returns or sets the toggle symmetric offsets |
VentSpacing | Returns the vent spacing |
Methods¶
Method | Description |
---|---|
Commit | Commits any edits that have been applied to the builder. |
CommitFeature | Commits the feature parameters and creates the feature |
Destroy | Deletes the builder, and cleans up any objects created by the builder. |
GetCommittedObjects | For builders that create more than one object, this method returns the objects that are created by commit. |
GetFeature | Returns the feature currently being edited by this builder. |
GetObject | Returns the object currently being edited by this builder. |
HideInternalParentFeatureAfterEdit | Re-suppress an internal parent feature (a slave feature) after it has been edited. |
SetParentFeatureInternal | Set the parent features which would be internal or slaves to the feature being created or commited |
ShowInternalParentFeatureForEdit | Unsuppress an internal parent feature (a slave feature) so it can be edited. |
ShowResults | Updates the model to reflect the result of an edit to the model for all builders that support showing results. |
UnsetParentFeatureInternal | Set the internal parent feature of the feature being edited to external |
Validate | Validate whether the inputs to the component are sufficient for commit to be called. |
Enumerations¶
VentilationHoles2BuilderArraySpacing Enumeration | available methods used to define the spacing between the holes |
Property Detail¶
AngularDimOffset¶
-
VentilationHoles2Builder.
AngularDimOffset
¶ Returns the angular dim offset
-------------------------------------
Getter Method
Signature
AngularDimOffset
Returns: Return type: NXOpen.Expression
New in version NX8.0.0.
License requirements: None.
EnumSpacing¶
-
VentilationHoles2Builder.
EnumSpacing
¶ Returns or sets the enum spacing
-------------------------------------
Getter Method
Signature
EnumSpacing
Returns: Return type: NXOpen.Features.ShipDesign.VentilationHoles2BuilderArraySpacing
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
EnumSpacing
Parameters: enumSpacing ( NXOpen.Features.ShipDesign.VentilationHoles2BuilderArraySpacing
) –New in version NX8.0.0.
License requirements: nx_ship_detail (“Ship Detail Design”)
GuideOffset¶
-
VentilationHoles2Builder.
GuideOffset
¶ Returns the guide offset
-------------------------------------
Getter Method
Signature
GuideOffset
Returns: Return type: NXOpen.Expression
New in version NX8.0.0.
License requirements: None.
IntNumVents¶
-
VentilationHoles2Builder.
IntNumVents
¶ Returns or sets the int num vents
-------------------------------------
Getter Method
Signature
IntNumVents
Returns: Return type: int New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
IntNumVents
Parameters: intNumVents (int) – New in version NX8.0.0.
License requirements: nx_ship_detail (“Ship Detail Design”)
OnPathEndOffset¶
-
VentilationHoles2Builder.
OnPathEndOffset
¶ Returns the on path end offset
-------------------------------------
Getter Method
Signature
OnPathEndOffset
Returns: Return type: NXOpen.GeometricUtilities.OnPathDimensionBuilder
New in version NX8.0.0.
License requirements: None.
OnPathStartOffset¶
-
VentilationHoles2Builder.
OnPathStartOffset
¶ Returns the on path start offset
-------------------------------------
Getter Method
Signature
OnPathStartOffset
Returns: Return type: NXOpen.GeometricUtilities.OnPathDimensionBuilder
New in version NX8.0.0.
License requirements: None.
SectionGuide¶
-
VentilationHoles2Builder.
SectionGuide
¶ Returns the section guide
-------------------------------------
Getter Method
Signature
SectionGuide
Returns: Return type: NXOpen.Section
New in version NX8.0.0.
License requirements: None.
SelectEndTrim¶
-
VentilationHoles2Builder.
SelectEndTrim
¶ Returns the select end trim
-------------------------------------
Getter Method
Signature
SelectEndTrim
Returns: Return type: NXOpen.SelectTaggedObject
New in version NX8.0.0.
License requirements: None.
SelectStartTrim¶
-
VentilationHoles2Builder.
SelectStartTrim
¶ Returns the select start trim
-------------------------------------
Getter Method
Signature
SelectStartTrim
Returns: Return type: NXOpen.SelectTaggedObject
New in version NX8.0.0.
License requirements: None.
SelectTargetFace¶
-
VentilationHoles2Builder.
SelectTargetFace
¶ Returns the select target face
-------------------------------------
Getter Method
Signature
SelectTargetFace
Returns: Return type: NXOpen.SelectTaggedObjectList
New in version NX8.0.0.
License requirements: None.
SketchBlock¶
-
VentilationHoles2Builder.
SketchBlock
¶ Returns the sketch block.
Users can specify the hole shape using a single sketch. The sketch type and its parameters are controlled by the
NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder
.-------------------------------------
Getter Method
Signature
SketchBlock
Returns: Return type: NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder
New in version NX8.0.0.
License requirements: None.
ToggleSymmetricOffsets¶
-
VentilationHoles2Builder.
ToggleSymmetricOffsets
¶ Returns or sets the toggle symmetric offsets
-------------------------------------
Getter Method
Signature
ToggleSymmetricOffsets
Returns: Return type: bool New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
ToggleSymmetricOffsets
Parameters: toggleSymmetricOffsets (bool) – New in version NX8.0.0.
License requirements: nx_ship_detail (“Ship Detail Design”)
VentSpacing¶
-
VentilationHoles2Builder.
VentSpacing
¶ Returns the vent spacing
-------------------------------------
Getter Method
Signature
VentSpacing
Returns: Return type: NXOpen.Expression
New in version NX8.0.0.
License requirements: None.
Method Detail¶
Validate¶
-
VentilationHoles2Builder.
Validate
¶ Validate whether the inputs to the component are sufficient for commit to be called.
If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.
Signature
Validate()
Returns: Was self validation successful Return type: bool New in version NX3.0.1.
License requirements: None.