MWMoldedPartValidationBuilder Class¶
-
class
NXOpen.Tooling.
MWMoldedPartValidationBuilder
¶ Bases:
NXOpen.Builder
Represents a builder to be used to perform Molded Part Validation analysis.
To create a new instance of this class, use
NXOpen.Tooling.MWMoldedPartValidationManager.CreateMWMoldedPartValidationBuilder()
Default values.
Property Value CalculationOption KeepExisting FaceDraftAngleLimit 3 FaceHighlightSelectedFaces 1 FaceNonSelectedFacesTranslucency 0 FaceSelectAllFaces 0 FaceSelectCrossoverFaces 0 FaceSelectNegativeFaces1 0 FaceSelectNegativeFaces2 0 FaceSelectPositiveFaces1 0 FaceSelectPositiveFaces2 0 FaceSelectUndercutAreas 0 FaceSelectUndercutEdges 0 FaceSelectVerticalFaces 0 FaceSelectedFacesTranslucency 0 InformationCheckScope FaceProperties InformationLowerLimit 0 InformationLowerLimitR01 5.5 InformationLowerLimitR02 5 InformationLowerLimitR03 4.5 InformationLowerLimitR04 4 InformationLowerLimitR05 3.5 InformationLowerLimitR06 3 InformationLowerLimitR07 2.5 InformationLowerLimitR08 2 InformationLowerLimitR09 1.5 InformationLowerLimitR10 1 InformationLowerLimitR11 0.5 InformationLowerLimitR12 0 InformationRangeType Uniform InformationSharpAngleLimit 6 InformationShowBoundaryEdges 0 InformationShowRangeR01 0 InformationShowRangeR02 0 InformationShowRangeR03 0 InformationShowRangeR04 0 InformationShowRangeR05 0 InformationShowRangeR06 0 InformationShowRangeR07 0 InformationShowRangeR08 0 InformationShowRangeR09 0 InformationShowRangeR10 0 InformationShowRangeR11 0 InformationShowRangeR12 0 InformationShowSharpEdges 0 InformationUpperLimit 6 InformationUpperLimitR01 6 InformationUpperLimitR02 5.5 InformationUpperLimitR03 5 InformationUpperLimitR04 4.5 InformationUpperLimitR05 4 InformationUpperLimitR06 3.5 InformationUpperLimitR07 3 InformationUpperLimitR08 2.5 InformationUpperLimitR09 2 InformationUpperLimitR10 0.5 InformationUpperLimitR11 1 InformationUpperLimitR12 0.5 InformationUseSingleTolerance 0 RegionAssignToRegionOption CavityRegion RegionCavityRegionTranslucency 0 RegionCoreRegionTranslucency 0 RegionSelectCrossoverRegionFaces 0 RegionSelectCrossoverVerticalFaces 0 RegionSelectUnknownFaces 0 RegionShowIncompleteLoops 1 RegionShowInternalLoops 1 RegionShowPartingEdges 1 New in version NX8.0.0.
Properties¶
Property | Description |
---|---|
ActiveTabPage | Returns or sets the active tab page. |
CalculationDrawDirection | Returns or sets the draw direction on the Calculate Tab page. |
CalculationOption | Returns or sets the calculation option on the Calculate Tab page. |
CalculationProductBody | Returns the product body to be analyzed on the Calculate Tab page. |
FaceAllFacesColor | Returns or sets the color for applying to all faces on the Face Tab page. |
FaceCrossoverFacesColor | Returns or sets the color for applying to the crossover faces on the Face Tab page. |
FaceDraftAngleLimit | Returns or sets the draft angle limit on the Face Tab page. |
FaceHighlightSelectedFaces | Returns or sets the option for highlighting the selected faces on the Face Tab page. |
FaceNegativeFacesColor1 | Returns or sets the color for applying to the negative small radius faces on the Face Tab page. |
FaceNegativeFacesColor2 | Returns or sets the color for applying to the negative faces on the Face Tab page. |
FaceNonSelectedFacesTranslucency | Returns or sets the translucency for the non-selected faces on the Face Tab page. |
FacePositiveFacesColor1 | Returns or sets the color for applying to the positive faces on the Face Tab page. |
FacePositiveFacesColor2 | Returns or sets the color for applying to the positive small radius faces on the Face Tab page. |
FaceSelectAllFaces | Returns or sets the option for turning on/off the selection of all faces on the Face Tab page. |
FaceSelectCrossoverFaces | Returns or sets the option for turning on/off the highlight of the crossover faces on the Face Tab page. |
FaceSelectNegativeFaces1 | Returns or sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page. |
FaceSelectNegativeFaces2 | Returns or sets the option for turning on/off the highlight of the negative faces on the Face Tab page. |
FaceSelectPositiveFaces1 | Returns or sets the option for turning on/off the highlight of the positive faces on the Face Tab page. |
FaceSelectPositiveFaces2 | Returns or sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page. |
FaceSelectUndercutAreas | Returns or sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page. |
FaceSelectUndercutEdges | Returns or sets the option for turning on/off the highlight of the undercut edges on the Face Tab page. |
FaceSelectVerticalFaces | Returns or sets the option for turning on/off the highlight of the vertical faces on the Face Tab page. |
FaceSelectedFacesTranslucency | Returns or sets the translucency for the selected faces on the Face Tab page. |
FaceUndercutAreasColor | Returns or sets the color for applying to the undercut area faces on the Face Tab page. |
FaceUndercutEdgesColor | Returns or sets the color for applying to the undercut edges on the Face Tab page. |
FaceVerticalFacesColor | Returns or sets the color for applying to the vertical faces on the Face Tab page. |
InApplyStatus | Returns or sets the flag that indicates the Apply status of the command, needed only in the interactive environment. |
InformationCheckScope | Returns or sets the check scope on the Information Tab page. |
InformationColorR01 | Returns or sets the color of row 1 for the small radius faces on the Information Tab page. |
InformationColorR02 | Returns or sets the color of row 2 for the small radius faces on the Information Tab page. |
InformationColorR03 | Returns or sets the color of row 3 for the small radius faces on the Information Tab page. |
InformationColorR04 | Returns or sets the color of row 4 for the small radius faces on the Information Tab page. |
InformationColorR05 | Returns or sets the color of row 5 for the small radius faces on the Information Tab page. |
InformationColorR06 | Returns or sets the color of row 6 for the small radius faces on the Information Tab page. |
InformationColorR07 | Returns or sets the color of row 7 for the small radius faces on the Information Tab page. |
InformationColorR08 | Returns or sets the color of row 8 for the small radius faces on the Information Tab page. |
InformationColorR09 | Returns or sets the color of row 9 for the small radius faces on the Information Tab page. |
InformationColorR10 | Returns or sets the color of row 10 for the small radius faces on the Information Tab page. |
InformationColorR11 | Returns or sets the color of row 11 for the small radius faces on the Information Tab page. |
InformationColorR12 | Returns or sets the color of row 12 for the small radius faces on the Information Tab page. |
InformationInspectFace | Returns the face selected face for displaying the face properties. |
InformationLowerLimit | Returns or sets the lower limit of the range limit values on the Information Tab page. |
InformationLowerLimitR01 | Returns or sets the lower limit of row 1 for the small radius faces on the Information Tab page. |
InformationLowerLimitR02 | Returns or sets the lower limit of row 2 for the small radius faces on the Information Tab page. |
InformationLowerLimitR03 | Returns or sets the lower limit of row 3 for the small radius faces on the Information Tab page. |
InformationLowerLimitR04 | Returns or sets the lower limit of row 4 for the small radius faces on the Information Tab page. |
InformationLowerLimitR05 | Returns or sets the lower limit of row 5 for the small radius faces on the Information Tab page. |
InformationLowerLimitR06 | Returns or sets the lower limit of row 6 for the small radius faces on the Information Tab page. |
InformationLowerLimitR07 | Returns or sets the lower limit of row 7 for the small radius faces on the Information Tab page. |
InformationLowerLimitR08 | Returns or sets the lower limit of row 8 for the small radius faces on the Information Tab page. |
InformationLowerLimitR09 | Returns or sets the lower limit of row 9 for the small radius faces on the Information Tab page. |
InformationLowerLimitR10 | Returns or sets the lower limit of row 10 for the small radius faces on the Information Tab page. |
InformationLowerLimitR11 | Returns or sets the lower limit of row 11 for the small radius faces on the Information Tab page. |
InformationLowerLimitR12 | Returns or sets the lower limit of row 12 for the small radius faces on the Information Tab page. |
InformationRangeType | Returns or sets the range type on the Information Tab page. |
InformationSharpAngleLimit | Returns or sets the sharp angle limit on the Information Tab page. |
InformationShowBoundaryEdges | Returns or sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page. |
InformationShowRangeR01 | Returns or sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page. |
InformationShowRangeR02 | Returns or sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page. |
InformationShowRangeR03 | Returns or sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page. |
InformationShowRangeR04 | Returns or sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page. |
InformationShowRangeR05 | Returns or sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page. |
InformationShowRangeR06 | Returns or sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page. |
InformationShowRangeR07 | Returns or sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page. |
InformationShowRangeR08 | Returns or sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page. |
InformationShowRangeR09 | Returns or sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page. |
InformationShowRangeR10 | Returns or sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page. |
InformationShowRangeR11 | Returns or sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page. |
InformationShowRangeR12 | Returns or sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page. |
InformationShowSharpEdges | Returns or sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page. |
InformationUpperLimit | Returns or sets the upper limit on the Information Tab page. |
InformationUpperLimitR01 | Returns or sets the upper limit of row 1 for the small radius faces on the Information Tab page. |
InformationUpperLimitR02 | Returns or sets the upper limit of row 2 for the small radius faces on the Information Tab page. |
InformationUpperLimitR03 | Returns or sets the upper limit of row 3 for the small radius faces on the Information Tab page. |
InformationUpperLimitR04 | Returns or sets the upper limit of row 4 for the small radius faces on the Information Tab page. |
InformationUpperLimitR05 | Returns or sets the upper limit of row 5 for the small radius faces on the Information Tab page. |
InformationUpperLimitR06 | Returns or sets the upper limit of row 6 for the small radius faces on the Information Tab page. |
InformationUpperLimitR07 | Returns or sets the upper limit of row 7 for the small radius faces on the Information Tab page. |
InformationUpperLimitR08 | Returns or sets the upper limit of row 8 for the small radius faces on the Information Tab page. |
InformationUpperLimitR09 | Returns or sets the upper limit of row 9 for the small radius faces on the Information Tab page. |
InformationUpperLimitR10 | Returns or sets the upper limit of row 10 for the small radius faces on the Information Tab page. |
InformationUpperLimitR11 | Returns or sets the upper limit of row 11 for the small radius faces on the Information Tab page. |
InformationUpperLimitR12 | Returns or sets the upper limit of row 12 for the small radius faces on the Information Tab page. |
InformationUseSingleTolerance | Returns or sets the option for using a single tolerance for defining the range limit values on the Information Tab page. |
RegionAssignToRegionOption | Returns or sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page. |
RegionCavityRegionColor | Returns or sets the color for applying to the cavity region faces on the Region Tab page. |
RegionCavityRegionTranslucency | Returns or sets the translucency for applying to the cavity region faces on the Region Tab page. |
RegionCoreRegionColor | Returns or sets the color for applying to the core region faces on the Region Tab page. |
RegionCoreRegionTranslucency | Returns or sets the translucency for applying to the core region faces on the Region Tab page. |
RegionFaces | Returns the faces selected for assigning to the cavity or core region. |
RegionSelectCrossoverRegionFaces | Returns or sets the option for including or removing the crossover region faces in the selection on the Region Tab page. |
RegionSelectCrossoverVerticalFaces | Returns or sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page. |
RegionSelectUnknownFaces | Returns or sets the option for including or removing the unknown faces in the selection on the Region Tab page. |
RegionShowIncompleteLoops | Returns or sets the option for turning on/off the highlight of the incomplete loop edges. |
RegionShowInternalLoops | Returns or sets the option for turning on/off the highlight of the internal loop edges. |
RegionShowPartingEdges | Returns or sets the option for turning on/off the highlight of the parting edges. |
RegionUndefinedRegionColor | Returns or sets the color for applying to the undefined region faces on the Region Tab page. |
Tag | Returns the Tag for this object. |
Methods¶
Method | Description |
---|---|
Calculate | Calculate button on the Calculate Tab page. |
Commit | Commits any edits that have been applied to the builder. |
Destroy | Deletes the builder, and cleans up any objects created by the builder. |
FaceSetAllFacesColor | Action button for setting color on all faces on the Face Tab page. |
GetCommittedObjects | For builders that create more than one object, this method returns the objects that are created by commit. |
GetObject | Returns the object currently being edited by this builder. |
InitMpvData | Initialize the MPV data for performing analysis in Molded Part Validation. |
PerformModelPropertiesCalculation | Perform model properties calculation if the calculation has not been performed before. |
PerformSharpCornersCalculation | Perform the sharp corners calculation if the calculation has not been performed before. |
ProcessFaceSplit | Action button for invoking the Split Face command on the Face Tab page. |
RegionSetRegionsColor | Action button for setting color on the cavity, core and undefined region faces on the Region Tab page. |
SetCalculationProductBody | Set the product body to be analyzed on the Calculate Tab page. |
ShowResults | Updates the model to reflect the result of an edit to the model for all builders that support showing results. |
UpdateEjectDirection | Update the eject direction. |
UpdateMpvData | Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog. |
UpdateSharpEdgesInformation | Update the sharp edges information based on the new sharp angle limit which has been changed by the user. |
UpdateSmallRadiusFacesInformation | Update the small radius faces information based on the new range limits of the radius which has been changed by the user. |
Validate | Validate whether the inputs to the component are sufficient for commit to be called. |
Enumerations¶
MWMoldedPartValidationBuilderAssignToRegion Enumeration | Options for assigning faces to the Cavity or Core region |
MWMoldedPartValidationBuilderCalculateOption Enumeration | Calculation options |
MWMoldedPartValidationBuilderCheckScope Enumeration | Check scope for information |
MWMoldedPartValidationBuilderRangeType Enumeration | Range type for displaying small corner radius faces |
Property Detail¶
ActiveTabPage¶
-
MWMoldedPartValidationBuilder.
ActiveTabPage
¶ Returns or sets the active tab page.
-------------------------------------
Getter Method
Signature
ActiveTabPage()
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
ActiveTabPage(activeTabPage)
Parameters: activeTabPage (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
CalculationDrawDirection¶
-
MWMoldedPartValidationBuilder.
CalculationDrawDirection
¶ Returns or sets the draw direction on the Calculate Tab page.
-------------------------------------
Getter Method
Signature
CalculationDrawDirection()
Returns: Return type: NXOpen.Direction
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
CalculationDrawDirection(calculationDrawDirection)
Parameters: calculationDrawDirection ( NXOpen.Direction
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
CalculationOption¶
-
MWMoldedPartValidationBuilder.
CalculationOption
¶ Returns or sets the calculation option on the Calculate Tab page.
-------------------------------------
Getter Method
Signature
CalculationOption()
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderCalculateOption
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
CalculationOption(calculationOption)
Parameters: calculationOption ( NXOpen.Tooling.MWMoldedPartValidationBuilderCalculateOption
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
CalculationProductBody¶
-
MWMoldedPartValidationBuilder.
CalculationProductBody
¶ Returns the product body to be analyzed on the Calculate Tab page.
-------------------------------------
Getter Method
Signature
CalculationProductBody()
Returns: Return type: NXOpen.SelectBody
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceAllFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceAllFacesColor
¶ Returns or sets the color for applying to all faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceAllFacesColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceAllFacesColor(faceAllFacesColor)
Parameters: faceAllFacesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceCrossoverFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceCrossoverFacesColor
¶ Returns or sets the color for applying to the crossover faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceCrossoverFacesColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceCrossoverFacesColor(faceCrossoverFacesColor)
Parameters: faceCrossoverFacesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceDraftAngleLimit¶
-
MWMoldedPartValidationBuilder.
FaceDraftAngleLimit
¶ Returns or sets the draft angle limit on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceDraftAngleLimit()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceDraftAngleLimit(faceDraftAngleLimit)
Parameters: faceDraftAngleLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceHighlightSelectedFaces¶
-
MWMoldedPartValidationBuilder.
FaceHighlightSelectedFaces
¶ Returns or sets the option for highlighting the selected faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceHighlightSelectedFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceHighlightSelectedFaces(faceHighlightSelectedFaces)
Parameters: faceHighlightSelectedFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceNegativeFacesColor1¶
-
MWMoldedPartValidationBuilder.
FaceNegativeFacesColor1
¶ Returns or sets the color for applying to the negative small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceNegativeFacesColor1()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceNegativeFacesColor1(faceNegativeFacesColor1)
Parameters: faceNegativeFacesColor1 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceNegativeFacesColor2¶
-
MWMoldedPartValidationBuilder.
FaceNegativeFacesColor2
¶ Returns or sets the color for applying to the negative faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceNegativeFacesColor2()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceNegativeFacesColor2(faceNegativeFacesColor2)
Parameters: faceNegativeFacesColor2 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceNonSelectedFacesTranslucency¶
-
MWMoldedPartValidationBuilder.
FaceNonSelectedFacesTranslucency
¶ Returns or sets the translucency for the non-selected faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceNonSelectedFacesTranslucency()
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceNonSelectedFacesTranslucency(faceNonSelectedFacesTranslucency)
Parameters: faceNonSelectedFacesTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FacePositiveFacesColor1¶
-
MWMoldedPartValidationBuilder.
FacePositiveFacesColor1
¶ Returns or sets the color for applying to the positive faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FacePositiveFacesColor1()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FacePositiveFacesColor1(facePositiveFacesColor1)
Parameters: facePositiveFacesColor1 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FacePositiveFacesColor2¶
-
MWMoldedPartValidationBuilder.
FacePositiveFacesColor2
¶ Returns or sets the color for applying to the positive small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FacePositiveFacesColor2()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FacePositiveFacesColor2(facePositiveFacesColor2)
Parameters: facePositiveFacesColor2 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectAllFaces¶
-
MWMoldedPartValidationBuilder.
FaceSelectAllFaces
¶ Returns or sets the option for turning on/off the selection of all faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectAllFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectAllFaces(faceSelectAllFaces)
Parameters: faceSelectAllFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectCrossoverFaces¶
-
MWMoldedPartValidationBuilder.
FaceSelectCrossoverFaces
¶ Returns or sets the option for turning on/off the highlight of the crossover faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectCrossoverFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectCrossoverFaces(faceSelectCrossoverFaces)
Parameters: faceSelectCrossoverFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectNegativeFaces1¶
-
MWMoldedPartValidationBuilder.
FaceSelectNegativeFaces1
¶ Returns or sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectNegativeFaces1()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectNegativeFaces1(faceSelectNegativeFaces1)
Parameters: faceSelectNegativeFaces1 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectNegativeFaces2¶
-
MWMoldedPartValidationBuilder.
FaceSelectNegativeFaces2
¶ Returns or sets the option for turning on/off the highlight of the negative faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectNegativeFaces2()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectNegativeFaces2(faceSelectNegativeFaces2)
Parameters: faceSelectNegativeFaces2 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectPositiveFaces1¶
-
MWMoldedPartValidationBuilder.
FaceSelectPositiveFaces1
¶ Returns or sets the option for turning on/off the highlight of the positive faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectPositiveFaces1()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectPositiveFaces1(faceSelectPositiveFaces1)
Parameters: faceSelectPositiveFaces1 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectPositiveFaces2¶
-
MWMoldedPartValidationBuilder.
FaceSelectPositiveFaces2
¶ Returns or sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectPositiveFaces2()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectPositiveFaces2(faceSelectPositiveFaces2)
Parameters: faceSelectPositiveFaces2 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectUndercutAreas¶
-
MWMoldedPartValidationBuilder.
FaceSelectUndercutAreas
¶ Returns or sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectUndercutAreas()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectUndercutAreas(faceSelectUndercutAreas)
Parameters: faceSelectUndercutAreas (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectUndercutEdges¶
-
MWMoldedPartValidationBuilder.
FaceSelectUndercutEdges
¶ Returns or sets the option for turning on/off the highlight of the undercut edges on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectUndercutEdges()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectUndercutEdges(faceSelectUndercutEdges)
Parameters: faceSelectUndercutEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectVerticalFaces¶
-
MWMoldedPartValidationBuilder.
FaceSelectVerticalFaces
¶ Returns or sets the option for turning on/off the highlight of the vertical faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectVerticalFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectVerticalFaces(faceSelectVerticalFaces)
Parameters: faceSelectVerticalFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectedFacesTranslucency¶
-
MWMoldedPartValidationBuilder.
FaceSelectedFacesTranslucency
¶ Returns or sets the translucency for the selected faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectedFacesTranslucency()
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectedFacesTranslucency(faceSelectedFacesTranslucency)
Parameters: faceSelectedFacesTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceUndercutAreasColor¶
-
MWMoldedPartValidationBuilder.
FaceUndercutAreasColor
¶ Returns or sets the color for applying to the undercut area faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceUndercutAreasColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceUndercutAreasColor(faceUndercutAreasColor)
Parameters: faceUndercutAreasColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceUndercutEdgesColor¶
-
MWMoldedPartValidationBuilder.
FaceUndercutEdgesColor
¶ Returns or sets the color for applying to the undercut edges on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceUndercutEdgesColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceUndercutEdgesColor(faceUndercutEdgesColor)
Parameters: faceUndercutEdgesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceVerticalFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceVerticalFacesColor
¶ Returns or sets the color for applying to the vertical faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceVerticalFacesColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceVerticalFacesColor(faceVerticalFacesColor)
Parameters: faceVerticalFacesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InApplyStatus¶
-
MWMoldedPartValidationBuilder.
InApplyStatus
¶ Returns or sets the flag that indicates the Apply status of the command, needed only in the interactive environment.
0: “Apply” has not been done before; 1: “Apply” has been done before.
-------------------------------------
Getter Method
Signature
InApplyStatus()
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InApplyStatus(inApplyStatus)
Parameters: inApplyStatus (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationCheckScope¶
-
MWMoldedPartValidationBuilder.
InformationCheckScope
¶ Returns or sets the check scope on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationCheckScope()
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderCheckScope
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationCheckScope(informationCheckScope)
Parameters: informationCheckScope ( NXOpen.Tooling.MWMoldedPartValidationBuilderCheckScope
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR01¶
-
MWMoldedPartValidationBuilder.
InformationColorR01
¶ Returns or sets the color of row 1 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR01()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR01(informationColorR01)
Parameters: informationColorR01 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR02¶
-
MWMoldedPartValidationBuilder.
InformationColorR02
¶ Returns or sets the color of row 2 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR02()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR02(informationColorR02)
Parameters: informationColorR02 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR03¶
-
MWMoldedPartValidationBuilder.
InformationColorR03
¶ Returns or sets the color of row 3 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR03()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR03(informationColorR03)
Parameters: informationColorR03 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR04¶
-
MWMoldedPartValidationBuilder.
InformationColorR04
¶ Returns or sets the color of row 4 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR04()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR04(informationColorR04)
Parameters: informationColorR04 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR05¶
-
MWMoldedPartValidationBuilder.
InformationColorR05
¶ Returns or sets the color of row 5 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR05()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR05(informationColorR05)
Parameters: informationColorR05 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR06¶
-
MWMoldedPartValidationBuilder.
InformationColorR06
¶ Returns or sets the color of row 6 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR06()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR06(informationColorR06)
Parameters: informationColorR06 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR07¶
-
MWMoldedPartValidationBuilder.
InformationColorR07
¶ Returns or sets the color of row 7 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR07()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR07(informationColorR07)
Parameters: informationColorR07 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR08¶
-
MWMoldedPartValidationBuilder.
InformationColorR08
¶ Returns or sets the color of row 8 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR08()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR08(informationColorR08)
Parameters: informationColorR08 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR09¶
-
MWMoldedPartValidationBuilder.
InformationColorR09
¶ Returns or sets the color of row 9 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR09()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR09(informationColorR09)
Parameters: informationColorR09 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR10¶
-
MWMoldedPartValidationBuilder.
InformationColorR10
¶ Returns or sets the color of row 10 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR10()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR10(informationColorR10)
Parameters: informationColorR10 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR11¶
-
MWMoldedPartValidationBuilder.
InformationColorR11
¶ Returns or sets the color of row 11 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR11()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR11(informationColorR11)
Parameters: informationColorR11 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR12¶
-
MWMoldedPartValidationBuilder.
InformationColorR12
¶ Returns or sets the color of row 12 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR12()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR12(informationColorR12)
Parameters: informationColorR12 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationInspectFace¶
-
MWMoldedPartValidationBuilder.
InformationInspectFace
¶ Returns the face selected face for displaying the face properties.
-------------------------------------
Getter Method
Signature
InformationInspectFace()
Returns: Return type: NXOpen.SelectFace
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimit¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimit
¶ Returns or sets the lower limit of the range limit values on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimit()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimit(informationLowerLimit)
Parameters: informationLowerLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR01¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR01
¶ Returns or sets the lower limit of row 1 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR01()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR01(informationLowerLimitR01)
Parameters: informationLowerLimitR01 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR02¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR02
¶ Returns or sets the lower limit of row 2 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR02()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR02(informationLowerLimitR02)
Parameters: informationLowerLimitR02 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR03¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR03
¶ Returns or sets the lower limit of row 3 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR03()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR03(informationLowerLimitR03)
Parameters: informationLowerLimitR03 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR04¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR04
¶ Returns or sets the lower limit of row 4 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR04()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR04(informationLowerLimitR04)
Parameters: informationLowerLimitR04 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR05¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR05
¶ Returns or sets the lower limit of row 5 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR05()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR05(informationLowerLimitR05)
Parameters: informationLowerLimitR05 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR06¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR06
¶ Returns or sets the lower limit of row 6 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR06()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR06(informationLowerLimitR06)
Parameters: informationLowerLimitR06 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR07¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR07
¶ Returns or sets the lower limit of row 7 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR07()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR07(informationLowerLimitR07)
Parameters: informationLowerLimitR07 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR08¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR08
¶ Returns or sets the lower limit of row 8 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR08()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR08(informationLowerLimitR08)
Parameters: informationLowerLimitR08 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR09¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR09
¶ Returns or sets the lower limit of row 9 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR09()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR09(informationLowerLimitR09)
Parameters: informationLowerLimitR09 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR10¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR10
¶ Returns or sets the lower limit of row 10 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR10()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR10(informationLowerLimitR10)
Parameters: informationLowerLimitR10 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR11¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR11
¶ Returns or sets the lower limit of row 11 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR11()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR11(informationLowerLimitR11)
Parameters: informationLowerLimitR11 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR12¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR12
¶ Returns or sets the lower limit of row 12 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR12()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR12(informationLowerLimitR12)
Parameters: informationLowerLimitR12 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationRangeType¶
-
MWMoldedPartValidationBuilder.
InformationRangeType
¶ Returns or sets the range type on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationRangeType()
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderRangeType
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationRangeType(informationRangeType)
Parameters: informationRangeType ( NXOpen.Tooling.MWMoldedPartValidationBuilderRangeType
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationSharpAngleLimit¶
-
MWMoldedPartValidationBuilder.
InformationSharpAngleLimit
¶ Returns or sets the sharp angle limit on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationSharpAngleLimit()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationSharpAngleLimit(informationSharpAngleLimit)
Parameters: informationSharpAngleLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowBoundaryEdges¶
-
MWMoldedPartValidationBuilder.
InformationShowBoundaryEdges
¶ Returns or sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowBoundaryEdges()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowBoundaryEdges(informationShowBoundaryEdges)
Parameters: informationShowBoundaryEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR01¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR01
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR01()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR01(informationShowRangeR01)
Parameters: informationShowRangeR01 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR02¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR02
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR02()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR02(informationShowRangeR02)
Parameters: informationShowRangeR02 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR03¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR03
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR03()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR03(informationShowRangeR03)
Parameters: informationShowRangeR03 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR04¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR04
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR04()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR04(informationShowRangeR04)
Parameters: informationShowRangeR04 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR05¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR05
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR05()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR05(informationShowRangeR05)
Parameters: informationShowRangeR05 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR06¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR06
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR06()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR06(informationShowRangeR06)
Parameters: informationShowRangeR06 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR07¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR07
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR07()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR07(informationShowRangeR07)
Parameters: informationShowRangeR07 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR08¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR08
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR08()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR08(informationShowRangeR08)
Parameters: informationShowRangeR08 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR09¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR09
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR09()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR09(informationShowRangeR09)
Parameters: informationShowRangeR09 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR10¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR10
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR10()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR10(informationShowRangeR10)
Parameters: informationShowRangeR10 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR11¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR11
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR11()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR11(informationShowRangeR11)
Parameters: informationShowRangeR11 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR12¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR12
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR12()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR12(informationShowRangeR12)
Parameters: informationShowRangeR12 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowSharpEdges¶
-
MWMoldedPartValidationBuilder.
InformationShowSharpEdges
¶ Returns or sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowSharpEdges()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowSharpEdges(informationShowSharpEdges)
Parameters: informationShowSharpEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimit¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimit
¶ Returns or sets the upper limit on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimit()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimit(informationUpperLimit)
Parameters: informationUpperLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR01¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR01
¶ Returns or sets the upper limit of row 1 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR01()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR01(informationUpperLimitR01)
Parameters: informationUpperLimitR01 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR02¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR02
¶ Returns or sets the upper limit of row 2 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR02()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR02(informationUpperLimitR02)
Parameters: informationUpperLimitR02 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR03¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR03
¶ Returns or sets the upper limit of row 3 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR03()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR03(informationUpperLimitR03)
Parameters: informationUpperLimitR03 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR04¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR04
¶ Returns or sets the upper limit of row 4 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR04()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR04(informationUpperLimitR04)
Parameters: informationUpperLimitR04 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR05¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR05
¶ Returns or sets the upper limit of row 5 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR05()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR05(informationUpperLimitR05)
Parameters: informationUpperLimitR05 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR06¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR06
¶ Returns or sets the upper limit of row 6 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR06()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR06(informationUpperLimitR06)
Parameters: informationUpperLimitR06 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR07¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR07
¶ Returns or sets the upper limit of row 7 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR07()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR07(informationUpperLimitR07)
Parameters: informationUpperLimitR07 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR08¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR08
¶ Returns or sets the upper limit of row 8 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR08()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR08(informationUpperLimitR08)
Parameters: informationUpperLimitR08 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR09¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR09
¶ Returns or sets the upper limit of row 9 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR09()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR09(informationUpperLimitR09)
Parameters: informationUpperLimitR09 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR10¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR10
¶ Returns or sets the upper limit of row 10 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR10()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR10(informationUpperLimitR10)
Parameters: informationUpperLimitR10 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR11¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR11
¶ Returns or sets the upper limit of row 11 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR11()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR11(informationUpperLimitR11)
Parameters: informationUpperLimitR11 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR12¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR12
¶ Returns or sets the upper limit of row 12 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR12()
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR12(informationUpperLimitR12)
Parameters: informationUpperLimitR12 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUseSingleTolerance¶
-
MWMoldedPartValidationBuilder.
InformationUseSingleTolerance
¶ Returns or sets the option for using a single tolerance for defining the range limit values on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUseSingleTolerance()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUseSingleTolerance(informationUseSingleTolerance)
Parameters: informationUseSingleTolerance (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionAssignToRegionOption¶
-
MWMoldedPartValidationBuilder.
RegionAssignToRegionOption
¶ Returns or sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionAssignToRegionOption()
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderAssignToRegion
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionAssignToRegionOption(regionAssignToRegionOption)
Parameters: regionAssignToRegionOption ( NXOpen.Tooling.MWMoldedPartValidationBuilderAssignToRegion
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCavityRegionColor¶
-
MWMoldedPartValidationBuilder.
RegionCavityRegionColor
¶ Returns or sets the color for applying to the cavity region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCavityRegionColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCavityRegionColor(regionCavityRegionColor)
Parameters: regionCavityRegionColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCavityRegionTranslucency¶
-
MWMoldedPartValidationBuilder.
RegionCavityRegionTranslucency
¶ Returns or sets the translucency for applying to the cavity region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCavityRegionTranslucency()
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCavityRegionTranslucency(regionCavityRegionTranslucency)
Parameters: regionCavityRegionTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCoreRegionColor¶
-
MWMoldedPartValidationBuilder.
RegionCoreRegionColor
¶ Returns or sets the color for applying to the core region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCoreRegionColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCoreRegionColor(regionCoreRegionColor)
Parameters: regionCoreRegionColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCoreRegionTranslucency¶
-
MWMoldedPartValidationBuilder.
RegionCoreRegionTranslucency
¶ Returns or sets the translucency for applying to the core region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCoreRegionTranslucency()
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCoreRegionTranslucency(regionCoreRegionTranslucency)
Parameters: regionCoreRegionTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionFaces¶
-
MWMoldedPartValidationBuilder.
RegionFaces
¶ Returns the faces selected for assigning to the cavity or core region.
-------------------------------------
Getter Method
Signature
RegionFaces()
Returns: Return type: NXOpen.SelectFaceList
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSelectCrossoverRegionFaces¶
-
MWMoldedPartValidationBuilder.
RegionSelectCrossoverRegionFaces
¶ Returns or sets the option for including or removing the crossover region faces in the selection on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionSelectCrossoverRegionFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionSelectCrossoverRegionFaces(regionSelectCrossoverRegionFaces)
Parameters: regionSelectCrossoverRegionFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSelectCrossoverVerticalFaces¶
-
MWMoldedPartValidationBuilder.
RegionSelectCrossoverVerticalFaces
¶ Returns or sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionSelectCrossoverVerticalFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionSelectCrossoverVerticalFaces(regionSelectCrossoverVerticalFaces)
Parameters: regionSelectCrossoverVerticalFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSelectUnknownFaces¶
-
MWMoldedPartValidationBuilder.
RegionSelectUnknownFaces
¶ Returns or sets the option for including or removing the unknown faces in the selection on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionSelectUnknownFaces()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionSelectUnknownFaces(regionSelectUnknownFaces)
Parameters: regionSelectUnknownFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionShowIncompleteLoops¶
-
MWMoldedPartValidationBuilder.
RegionShowIncompleteLoops
¶ Returns or sets the option for turning on/off the highlight of the incomplete loop edges.
-------------------------------------
Getter Method
Signature
RegionShowIncompleteLoops()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionShowIncompleteLoops(regionShowIncompleteLoops)
Parameters: regionShowIncompleteLoops (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionShowInternalLoops¶
-
MWMoldedPartValidationBuilder.
RegionShowInternalLoops
¶ Returns or sets the option for turning on/off the highlight of the internal loop edges.
-------------------------------------
Getter Method
Signature
RegionShowInternalLoops()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionShowInternalLoops(regionShowInternalLoops)
Parameters: regionShowInternalLoops (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionShowPartingEdges¶
-
MWMoldedPartValidationBuilder.
RegionShowPartingEdges
¶ Returns or sets the option for turning on/off the highlight of the parting edges.
-------------------------------------
Getter Method
Signature
RegionShowPartingEdges()
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionShowPartingEdges(regionShowPartingEdges)
Parameters: regionShowPartingEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionUndefinedRegionColor¶
-
MWMoldedPartValidationBuilder.
RegionUndefinedRegionColor
¶ Returns or sets the color for applying to the undefined region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionUndefinedRegionColor()
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionUndefinedRegionColor(regionUndefinedRegionColor)
Parameters: regionUndefinedRegionColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
Method Detail¶
Calculate¶
-
MWMoldedPartValidationBuilder.
Calculate
¶ Calculate button on the Calculate Tab page.
Signature
Calculate()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSetAllFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceSetAllFacesColor
¶ Action button for setting color on all faces on the Face Tab page.
Signature
FaceSetAllFacesColor()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InitMpvData¶
-
MWMoldedPartValidationBuilder.
InitMpvData
¶ Initialize the MPV data for performing analysis in Molded Part Validation.
Signature
InitMpvData(changeBody)
Parameters: changeBody (int) – 0: No change in the selected body; 1: Change in the selected body; 2: Change in direction for the selected body. New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
PerformModelPropertiesCalculation¶
-
MWMoldedPartValidationBuilder.
PerformModelPropertiesCalculation
¶ Perform model properties calculation if the calculation has not been performed before.
Signature
PerformModelPropertiesCalculation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
PerformSharpCornersCalculation¶
-
MWMoldedPartValidationBuilder.
PerformSharpCornersCalculation
¶ Perform the sharp corners calculation if the calculation has not been performed before.
Signature
PerformSharpCornersCalculation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
ProcessFaceSplit¶
-
MWMoldedPartValidationBuilder.
ProcessFaceSplit
¶ Action button for invoking the Split Face command on the Face Tab page.
Signature
ProcessFaceSplit()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSetRegionsColor¶
-
MWMoldedPartValidationBuilder.
RegionSetRegionsColor
¶ Action button for setting color on the cavity, core and undefined region faces on the Region Tab page.
Signature
RegionSetRegionsColor()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
SetCalculationProductBody¶
-
MWMoldedPartValidationBuilder.
SetCalculationProductBody
¶ Set the product body to be analyzed on the Calculate Tab page.
Signature
SetCalculationProductBody(calculationProductBody)
Parameters: calculationProductBody ( NXOpen.Body
) – The product bodyNew in version NX10.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateEjectDirection¶
-
MWMoldedPartValidationBuilder.
UpdateEjectDirection
¶ Update the eject direction.
Signature
UpdateEjectDirection()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateMpvData¶
-
MWMoldedPartValidationBuilder.
UpdateMpvData
¶ Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog.
Signature
UpdateMpvData()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateSharpEdgesInformation¶
-
MWMoldedPartValidationBuilder.
UpdateSharpEdgesInformation
¶ Update the sharp edges information based on the new sharp angle limit which has been changed by the user.
Signature
UpdateSharpEdgesInformation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateSmallRadiusFacesInformation¶
-
MWMoldedPartValidationBuilder.
UpdateSmallRadiusFacesInformation
¶ Update the small radius faces information based on the new range limits of the radius which has been changed by the user.
Signature
UpdateSmallRadiusFacesInformation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
Validate¶
-
MWMoldedPartValidationBuilder.
Validate
¶ Validate whether the inputs to the component are sufficient for commit to be called.
If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.
Signature
Validate()
Returns: Was self validation successful Return type: bool New in version NX3.0.1.
License requirements: None.