AreaMillingNonSteepContainment Class

class NXOpen.CAM.AreaMillingNonSteepContainment

Bases: NXOpen.CAM.AreaMillingContainment

Represents a NonSteep Containment Builder

New in version NX9.0.0.

Properties

Property	Description
AddCenterPasses	Returns or sets the add center passes flag
AmAddPasses	Returns or sets the Additional Passes
AmAutoPatCenter	Returns or sets the Area Milling Auto Pattern Center
AmPocketDir	Returns or sets the Pocketing Direction value
CutAngleBuilder	Returns the cut angle
CutPattern	Returns the cut pattern builder
NumberOfStepoversPerSide	Returns the number of stepovers per side builder (inheritable int)
PatternCenterPoint	Returns or sets the Pattern Center Point
PatternDirection	Returns or sets the pattern direction
Stepover	Returns the builder of area milling stepover
Tag	Returns the Tag for this object.

Methods

Enumerations

AreaMillingNonSteepContainmentAmPocketDirTypes Enumeration	Available types for Area Milling Pocketing Direction in FASurfaceContour
AreaMillingNonSteepContainmentAutoPatCenterTypes Enumeration	Available types for area milling Auto Pattern Center
AreaMillingNonSteepContainmentPatternDirectionTypes Enumeration	Available types for Pattern Direction in Area Milling

Property Detail

AddCenterPasses

AreaMillingNonSteepContainment.AddCenterPasses

Returns or sets the add center passes flag

-------------------------------------

Getter Method

Signature AddCenterPasses()

Returns:the add center passes flag Return type:bool

New in version NX9.0.3.

License requirements: None.

-------------------------------------

Setter Method

Signature AddCenterPasses(midPass)

Parameters:midPass (bool) – the add center passes flag

New in version NX9.0.3.

License requirements: None.

AmAddPasses

AreaMillingNonSteepContainment.AmAddPasses

Returns or sets the Additional Passes

-------------------------------------

Getter Method

Signature AmAddPasses()

Returns:the Additional Passes value Return type:int

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AmAddPasses(addPassesValue)

Parameters:addPassesValue (int) – the Additional Passes value

New in version NX9.0.0.

License requirements: None.

AmAutoPatCenter

AreaMillingNonSteepContainment.AmAutoPatCenter

Returns or sets the Area Milling Auto Pattern Center

-------------------------------------

Getter Method

Signature AmAutoPatCenter()

Returns: Return type:NXOpen.CAM.AreaMillingNonSteepContainmentAutoPatCenterTypes

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AmAutoPatCenter(autoPatCenter)

Parameters:autoPatCenter (NXOpen.CAM.AreaMillingNonSteepContainmentAutoPatCenterTypes) –

New in version NX9.0.0.

License requirements: None.

AmPocketDir

AreaMillingNonSteepContainment.AmPocketDir

Returns or sets the Pocketing Direction value

-------------------------------------

Getter Method

Signature AmPocketDir()

Returns:the Pocketing Direction value Return type:NXOpen.CAM.AreaMillingNonSteepContainmentAmPocketDirTypes

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature AmPocketDir(pocketDirValue)

Parameters:pocketDirValue (NXOpen.CAM.AreaMillingNonSteepContainmentAmPocketDirTypes) – the Pocketing Direction value

New in version NX9.0.0.

License requirements: None.

CutAngleBuilder

AreaMillingNonSteepContainment.CutAngleBuilder

Returns the cut angle

-------------------------------------

Getter Method

Signature CutAngleBuilder()

Returns: Return type:NXOpen.CAM.CutAngle

New in version NX9.0.0.

License requirements: None.

NumberOfStepoversPerSide

AreaMillingNonSteepContainment.NumberOfStepoversPerSide

Returns the number of stepovers per side builder (inheritable int)

-------------------------------------

Getter Method

Signature NumberOfStepoversPerSide()

Returns:The area_milling number of offset builder Return type:NXOpen.CAM.InheritableIntBuilder

New in version NX9.0.0.

License requirements: None.

PatternCenterPoint

AreaMillingNonSteepContainment.PatternCenterPoint

Returns or sets the Pattern Center Point

-------------------------------------

Getter Method

Signature PatternCenterPoint()

Returns: Return type:NXOpen.Point

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PatternCenterPoint(centerPoint)

Parameters:centerPoint (NXOpen.Point) –

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)

PatternDirection

AreaMillingNonSteepContainment.PatternDirection

Returns or sets the pattern direction

-------------------------------------

Getter Method

Signature PatternDirection()

Returns:the Pattern Direction value Return type:NXOpen.CAM.AreaMillingNonSteepContainmentPatternDirectionTypes

New in version NX9.0.0.

License requirements: None.

-------------------------------------

Setter Method

Signature PatternDirection(propValue)

Parameters:propValue (NXOpen.CAM.AreaMillingNonSteepContainmentPatternDirectionTypes) – the Pattern Direction value

New in version NX9.0.0.

License requirements: cam_base (“CAM BASE”)