Solid Edge Part Type Library
AddByMatchFace Method
Solid Edge Part Type Library > Flanges Collection : AddByMatchFace Method
The edge on which the flange is to be constructed.
A member of the FeaturePropertyConstants constant set that specifies the direction in which the flange is to project.
Specifies the length of the flange.
Specifies the side of the profile to add thickness.
Specifies the bend radius value for the flange.
A constant that specifies whether the origin of the flange length dimension is on the inside or the outside of the existing material.
A constant that specifies the type of bend relief (square or round) to be applied to the bend.
Specifies the width of the bend relief.
Specifies the length of the bend relief.
A constant that specifies the type of corner relief (bend only or bend and face) to be applied to the bend.
Specifies the neutral factor to be applied to the bend.
A constant that specifies whether the flange is to be positioned with the material inside, the material outside, or the bend outside.
The degree of the bend angle, specified in radians. The default is 90 degrees.
The planar face or reference plane to which the flange is matched.
The offset type for the referenced Flange object. The value may be igLeft, igRight, or igNone.
The offset value for the referenced Flange object.
Description
This method creates a flange object by matching a flange face to an existing feature.
Syntax
Visual Basic
Public Function AddByMatchFace( _
   ByVal pLocatedEdge As Object, _
   ByVal FlangeSide As FeaturePropertyConstants, _
   ByVal FlangeLength As Double, _
   Optional ByVal ThicknessSide As Variant, _
   Optional ByVal InsideRadius As Variant, _
   Optional ByVal DimSide As Variant, _
   Optional ByVal BRType As Variant, _
   Optional ByVal BRWidth As Variant, _
   Optional ByVal BRLength As Variant, _
   Optional ByVal CRType As Variant, _
   Optional ByVal NeutralFactor As Variant, _
   Optional ByVal BnParamType As Variant, _
   Optional ByVal BendAngle As Variant, _
   Optional ByVal FlangeType As Variant, _
   Optional ByVal MatchFace As Variant, _
   Optional ByVal MatchFaceOffsetType As Variant, _
   Optional ByVal MatchFaceOffsetValue As Variant _
) As Flange
Parameters
pLocatedEdge
The edge on which the flange is to be constructed.
FlangeSide
ValueDescription
igAddRound
igAll
igAlongAnAxis
igAngularDummy
igAsConstruction
igBend
igBendAndFaceCornerRelief
igBendOnlyCornerRelief
igBothFeature Properties - Both
igChainedCornerRelief
igChamfer2Setbacks
igChamfer45degSetback
igChamferAngleSetback
igCircular
igCloseCornerCircleCutout
igCloseCornerClosed
igCloseCornerNone
igCloseCornerOpen
igClosed
igCloseFaces
igConcave
igConstantRadiusArc
igConstRadiusRound
igContinuous
igConvex
igCopy
igCornerRound
igCounterboreHole
igCounterboreProfileIsAtBottom
igCounterboreProfileIsAtTop
igCounterdrillHole
igCountersinkHole
igCurvatureContinuous
igCurvatureContinuousInterior
igCurveSetSeperator
igDeleteFaceHeal
igDelSMFaceBoth
igDelSMFaceNone
igDelSystemRelief
igDelZeroBendRadius
igDevelopableSurface
igEdgeBasedCrossSection
igEdgesByLoop
igEdgesByVertex
igEnd
igEndCaps
igEqualOffset
igEquationType
igExtendFeature Properties - Extend
igExtendBendRelief
igFacesTouchingCurvesOnly
igFilletBendRelief
igFinite
igFlangeCenterOfEdge
igFlangeEndFromEndEdge
igFlangeEndOnEndEdge
igFlangeFromBothEndsOfEdge
igFlangeFromDefinedStartPoint
igFlangeFullEdge
igFlangeMatchFace
igFlangeOffset
igFlangeStartFromEndEdge
igFlangeStartOnEndEdge
igFlatten
igFormedEnd
igFromNonReferenceEnd
igFromReferenceEnd
igFromTo
igFull
igGroove
igHemTypeCenteredLoop
igHemTypeClosed
igHemTypeClosedLoop
igHemTypeCurl
igHemTypeOpen
igHemTypeOpenLoop
igHemTypeSFlange
igIgnoreBlends
igInsideFeature Properties - Remove/Add Material Inside
igInsideDimension
igIntersect
igLancedEnd
igLeftFeature Properties - Project to Left
igLinear
igLinearCurvatureContinuousExtension
igLinearTangentExtension
igLip
igLouverFormedEndType
igLouverLancedEndType
igLouverRound
igLouverRoundNone
igMitreByAngle
igMitreByDist
igMitreManufacturingCut
igMitreNormalToThickness
igMitreParallelToThickness
igMitreRegularCut
igMove
igMultipleEdges
igNatural
igNeutralFactorFromExcel
igNFType
igNoCornerRound
igNoExtendFeature Properties - Do Not Extend
igNone
igNonSymmetric
igNormal
igNormalSideDummyFeature Properties - Normal Side
igNoRound
igNullConstant
igOffset
igOutsideFeature Properties - Remove/Add Material Outside
igOutsideDimension
igOverlapFaces
igParallelDummy
igParallelToPlane
igPartingFromCurve
igPartingFromEdge
igPartingFromPlane
igPartingFromSurface
igPatternAlongCurve
igPatternByTable
igPatternCircular
igPatternFillRegion
igPatternMirror
igPatternMountingBoss
igPatternRectangular
igPatternUserDefined
igPeriodic
igProfileBasedCrossSection
igProjectOptionProject
igProjectOptionWrap
igPunchedEnd
igRadial
igRaisedCounterboreSlot
igRecessedCounterboreSlot
igRecreateBlends
igRectangularBendRelief
igReflective
igRegularHole
igRegularSlot
igRegularThread
igRemoveBoundaries
igRemoveExternalBoundaries
igRemoveInternalBoundaries
igReverseNormal
igReverseNormalSideDummyFeature Properties - Reverse Normal Side
igRightFeature Properties - Project to Right
igRipBendRelief
igRipCornerRelief
igRndCapAcrossSharpEdges
igRndMiterAtCorner
igRndPreserveTopologyOff
igRndPreserveTopologyOn
igRndRollAcrossSharpEdges
igRndRollAcrossTangentEdgesOff
igRndRollAcrossTangentEdgesOn
igRndRollAlongBlendEdgesOff
igRndRollAlongBlendEdgesOn
igRndRollAroundCorner
igRoundAllVertexSetback
igRoundEndVertexEdgeSetback
igRoundSetbackIsAbsolute
igRoundSetbackIsRelative
igRoundSingleVertexSetback
igRoundStartVertexEdgeSetback
igRoundVertexEdgeSetback
igShowBoundaries
igSideInfoSetSeperator
igSingleEdge
igSMClearanceCutout
igSMFaceCutout
igSMMidPlaneCutout
igSplit
igSplitAngle1Left
igSplitAngle1Right
igSplitDraft
igStart
igStepDraft
igStepDraftPerpendicular
igStraightPipeThread
igSubtract
igSweepAlignArcLength
igSweepAlignNormal
igSweepAlignParallel
igSweepAlignParametrically
igSweepC1Continuity
igSweepC2Continuity
igSweepMergeAll
igSweepMergeAlongPath
igSweepMergeNone
igSweepScaleNone
igSweepScaleStartAndEnd
igSweepTwistNone
igSweepTwistStartAndEnd
igSweepTwistTurns
igSweepTwistTurnsPerUnitLength
igSymmetricFeature Properties - Symmetric Extent
igTangent
igTangentInterior
igTaperByAngle
igTaperByRatio
igTaperByRLRatio
igTaperDimAtBottom
igTaperDimAtTop
igTaperedEnd
igTaperedHole
igTaperedPipeThread
igTaperedToPlane
igTappedHole
igThickness
igThkInProfilePlane
igThkNormalToProfilePlane
igThreeHundredAndSixty
igThroughAll
igThroughAxis
igToEndOfEdge
igToggleToConstructionToggle from Design to Construction
igToggleToDesignToggle from Construction to Design
igToKeyPoint
igToNext
igTreatmentCircleCutout
igTreatmentCrown
igTreatmentDraft
igTreatmentFormedFeatureDisplayAsCenterMark
igTreatmentFormedFeatureDisplayAsModeled
igTreatmentFormedFeatureDisplayAsSketch
igTreatmentFormedFeatureDisplayAsSketchAndCenterMark
igTreatmentIntersect
igTreatmentMiterRelief
igTreatmentOff
igTreatmentRectangularCutout
igTreatmentUCutout
igTreatmentVCutout
igUnequalOffset
igUnite
igUShaped
igVarRadiusRound
igVBottomDimToFlat
igVBottomDimToV
igVShaped
igWeldGrooveCapProject
igWeldGrooveCapSameAsTop
igWeldGrooveCapSurface
A member of the FeaturePropertyConstants constant set that specifies the direction in which the flange is to project.
FlangeLength
Specifies the length of the flange.
ThicknessSide
Specifies the side of the profile to add thickness.
InsideRadius
Specifies the bend radius value for the flange.
DimSide
A constant that specifies whether the origin of the flange length dimension is on the inside or the outside of the existing material.
BRType
A constant that specifies the type of bend relief (square or round) to be applied to the bend.
BRWidth
Specifies the width of the bend relief.
BRLength
Specifies the length of the bend relief.
CRType
A constant that specifies the type of corner relief (bend only or bend and face) to be applied to the bend.
NeutralFactor
Specifies the neutral factor to be applied to the bend.
BnParamType
A constant that specifies whether the flange is to be positioned with the material inside, the material outside, or the bend outside.
BendAngle
The degree of the bend angle, specified in radians. The default is 90 degrees.
FlangeType
MatchFace
The planar face or reference plane to which the flange is matched.
MatchFaceOffsetType
The offset type for the referenced Flange object. The value may be igLeft, igRight, or igNone.
MatchFaceOffsetValue
The offset value for the referenced Flange object.
See Also

Flanges Collection  | Flanges Members  | Solid Edge V19 - What's New