|
NXOpen .NET Reference Guide
1899
|
|
NXOpen .NET Reference Guide
1899
|
Represents a builder to be used to perform Molded Part Validation analysis. More...
Public Types | |
| enum | AssignToRegion { CavityRegion, CoreRegion } |
| Options for assigning faces to the Cavity or Core region More... | |
| enum | CalculateOption { KeepExisting, EditRegionsOnly, ResetAll } |
| Calculation options More... | |
| enum | CheckScope { FaceProperties, ModelProperties, SharpCorners } |
| Check scope for information More... | |
| enum | RangeType { Uniform, Range, Plain } |
| Range type for displaying small corner radius faces More... | |
Public Member Functions | |
| unsafe void | Calculate () |
| Calculate button on the Calculate Tab page. More... | |
| unsafe void | FaceSetAllFacesColor () |
| Action button for setting color on all faces on the Face Tab page. More... | |
| unsafe void | InitMpvData (int changeBody) |
| Initialize the MPV data for performing analysis in Molded Part Validation. More... | |
| unsafe void | PerformModelPropertiesCalculation () |
| Perform model properties calculation if the calculation has not been performed before. More... | |
| unsafe void | PerformSharpCornersCalculation () |
| Perform the sharp corners calculation if the calculation has not been performed before. More... | |
| unsafe void | ProcessFaceSplit () |
| Action button for invoking the Split Face command on the Face Tab page. More... | |
| unsafe void | RegionSetRegionsColor () |
| Action button for setting color on the cavity, core and undefined region faces on the Region Tab page. More... | |
| unsafe void | SetCalculationProductBody (NXOpen.Body calculationProductBody) |
| Set the product body to be analyzed on the Calculate Tab page. More... | |
| unsafe void | UpdateEjectDirection () |
| Update the eject direction. More... | |
| unsafe void | UpdateMpvData () |
| Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog. More... | |
| unsafe void | UpdateSharpEdgesInformation () |
| Update the sharp edges information based on the new sharp angle limit which has been changed by the user. More... | |
| unsafe void | UpdateSmallRadiusFacesInformation () |
| Update the small radius faces information based on the new range limits of the radius which has been changed by the user. More... | |
 Public Member Functions inherited from NXOpen.Builder | |
| unsafe NXOpen.NXObject | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| unsafe void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| unsafe NXOpen.NXObject[] | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| unsafe NXOpen.NXObject | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| unsafe void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| unsafe bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Public Member Functions inherited from NXOpen.TaggedObject | |
| void | PrintTestData (String variableName) |
| <exclude> More... | |
| void | PrintTestData (String variableName, int lineNumber) |
| <exclude> More... | |
| override string | ToString () |
| Returns a String that represents the current Object. More... | |
| Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
| Asynchronously processes the given message. More... | |
| IMessage | SyncProcessMessage (IMessage msg) |
| Synchronously processes the given message. More... | |
Properties | |
| unsafe int | ActiveTabPage [get, set] |
| Returns or sets the active tab page. More... | |
| unsafe NXOpen.Direction | CalculationDrawDirection [get, set] |
| Returns or sets the draw direction on the Calculate Tab page. More... | |
| unsafe NXOpen.Tooling.MWMoldedPartValidationBuilder.CalculateOption | CalculationOption [get, set] |
| Returns or sets the calculation option on the Calculate Tab page. More... | |
| unsafe NXOpen.SelectBody | CalculationProductBody [get] |
| Returns the product body to be analyzed on the Calculate Tab page. More... | |
| unsafe NXOpen.NXColor | FaceAllFacesColor [get, set] |
| Returns or sets the color for applying to all faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FaceCrossoverFacesColor [get, set] |
| Returns or sets the color for applying to the crossover faces on the Face Tab page. More... | |
| unsafe double | FaceDraftAngleLimit [get, set] |
| Returns or sets the draft angle limit on the Face Tab page. More... | |
| unsafe bool | FaceHighlightSelectedFaces [get, set] |
| Returns or sets the option for highlighting the selected faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FaceNegativeFacesColor1 [get, set] |
| Returns or sets the color for applying to the negative small radius faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FaceNegativeFacesColor2 [get, set] |
| Returns or sets the color for applying to the negative faces on the Face Tab page. More... | |
| unsafe int | FaceNonSelectedFacesTranslucency [get, set] |
| Returns or sets the translucency for the non-selected faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FacePositiveFacesColor1 [get, set] |
| Returns or sets the color for applying to the positive faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FacePositiveFacesColor2 [get, set] |
| Returns or sets the color for applying to the positive small radius faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectAllFaces [get, set] |
| Returns or sets the option for turning on/off the selection of all faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectCrossoverFaces [get, set] |
| Returns or sets the option for turning on/off the highlight of the crossover faces on the Face Tab page. More... | |
| unsafe int | FaceSelectedFacesTranslucency [get, set] |
| Returns or sets the translucency for the selected faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectNegativeFaces1 [get, set] |
| Returns or sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectNegativeFaces2 [get, set] |
| Returns or sets the option for turning on/off the highlight of the negative faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectPositiveFaces1 [get, set] |
| Returns or sets the option for turning on/off the highlight of the positive faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectPositiveFaces2 [get, set] |
| Returns or sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectUndercutAreas [get, set] |
| Returns or sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page. More... | |
| unsafe bool | FaceSelectUndercutEdges [get, set] |
| Returns or sets the option for turning on/off the highlight of the undercut edges on the Face Tab page. More... | |
| unsafe bool | FaceSelectVerticalFaces [get, set] |
| Returns or sets the option for turning on/off the highlight of the vertical faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FaceUndercutAreasColor [get, set] |
| Returns or sets the color for applying to the undercut area faces on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FaceUndercutEdgesColor [get, set] |
| Returns or sets the color for applying to the undercut edges on the Face Tab page. More... | |
| unsafe NXOpen.NXColor | FaceVerticalFacesColor [get, set] |
| Returns or sets the color for applying to the vertical faces on the Face Tab page. More... | |
| unsafe int | InApplyStatus [get, set] |
| Returns or sets the flag that indicates the Apply status of the command, needed only in the interactive environment. More... | |
| unsafe NXOpen.Tooling.MWMoldedPartValidationBuilder.CheckScope | InformationCheckScope [get, set] |
| Returns or sets the check scope on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR01 [get, set] |
| Returns or sets the color of row 1 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR02 [get, set] |
| Returns or sets the color of row 2 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR03 [get, set] |
| Returns or sets the color of row 3 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR04 [get, set] |
| Returns or sets the color of row 4 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR05 [get, set] |
| Returns or sets the color of row 5 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR06 [get, set] |
| Returns or sets the color of row 6 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR07 [get, set] |
| Returns or sets the color of row 7 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR08 [get, set] |
| Returns or sets the color of row 8 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR09 [get, set] |
| Returns or sets the color of row 9 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR10 [get, set] |
| Returns or sets the color of row 10 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR11 [get, set] |
| Returns or sets the color of row 11 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.NXColor | InformationColorR12 [get, set] |
| Returns or sets the color of row 12 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.SelectFace | InformationInspectFace [get] |
| Returns the face selected face for displaying the face properties. More... | |
| unsafe double | InformationLowerLimit [get, set] |
| Returns or sets the lower limit of the range limit values on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR01 [get, set] |
| Returns or sets the lower limit of row 1 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR02 [get, set] |
| Returns or sets the lower limit of row 2 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR03 [get, set] |
| Returns or sets the lower limit of row 3 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR04 [get, set] |
| Returns or sets the lower limit of row 4 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR05 [get, set] |
| Returns or sets the lower limit of row 5 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR06 [get, set] |
| Returns or sets the lower limit of row 6 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR07 [get, set] |
| Returns or sets the lower limit of row 7 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR08 [get, set] |
| Returns or sets the lower limit of row 8 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR09 [get, set] |
| Returns or sets the lower limit of row 9 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR10 [get, set] |
| Returns or sets the lower limit of row 10 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR11 [get, set] |
| Returns or sets the lower limit of row 11 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationLowerLimitR12 [get, set] |
| Returns or sets the lower limit of row 12 for the small radius faces on the Information Tab page. More... | |
| unsafe NXOpen.Tooling.MWMoldedPartValidationBuilder.RangeType | InformationRangeType [get, set] |
| Returns or sets the range type on the Information Tab page. More... | |
| unsafe double | InformationSharpAngleLimit [get, set] |
| Returns or sets the sharp angle limit on the Information Tab page. More... | |
| unsafe bool | InformationShowBoundaryEdges [get, set] |
| Returns or sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR01 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR02 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR03 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR04 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR05 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR06 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR07 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR08 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR09 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR10 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR11 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page. More... | |
| unsafe bool | InformationShowRangeR12 [get, set] |
| Returns or sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page. More... | |
| unsafe bool | InformationShowSharpEdges [get, set] |
| Returns or sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page. More... | |
| unsafe double | InformationUpperLimit [get, set] |
| Returns or sets the upper limit on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR01 [get, set] |
| Returns or sets the upper limit of row 1 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR02 [get, set] |
| Returns or sets the upper limit of row 2 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR03 [get, set] |
| Returns or sets the upper limit of row 3 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR04 [get, set] |
| Returns or sets the upper limit of row 4 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR05 [get, set] |
| Returns or sets the upper limit of row 5 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR06 [get, set] |
| Returns or sets the upper limit of row 6 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR07 [get, set] |
| Returns or sets the upper limit of row 7 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR08 [get, set] |
| Returns or sets the upper limit of row 8 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR09 [get, set] |
| Returns or sets the upper limit of row 9 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR10 [get, set] |
| Returns or sets the upper limit of row 10 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR11 [get, set] |
| Returns or sets the upper limit of row 11 for the small radius faces on the Information Tab page. More... | |
| unsafe double | InformationUpperLimitR12 [get, set] |
| Returns or sets the upper limit of row 12 for the small radius faces on the Information Tab page. More... | |
| unsafe bool | InformationUseSingleTolerance [get, set] |
| Returns or sets the option for using a single tolerance for defining the range limit values on the Information Tab page. More... | |
| unsafe NXOpen.Tooling.MWMoldedPartValidationBuilder.AssignToRegion | RegionAssignToRegionOption [get, set] |
| Returns or sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page. More... | |
| unsafe NXOpen.NXColor | RegionCavityRegionColor [get, set] |
| Returns or sets the color for applying to the cavity region faces on the Region Tab page. More... | |
| unsafe int | RegionCavityRegionTranslucency [get, set] |
| Returns or sets the translucency for applying to the cavity region faces on the Region Tab page. More... | |
| unsafe NXOpen.NXColor | RegionCoreRegionColor [get, set] |
| Returns or sets the color for applying to the core region faces on the Region Tab page. More... | |
| unsafe int | RegionCoreRegionTranslucency [get, set] |
| Returns or sets the translucency for applying to the core region faces on the Region Tab page. More... | |
| unsafe NXOpen.SelectFaceList | RegionFaces [get] |
| Returns the faces selected for assigning to the cavity or core region. More... | |
| unsafe bool | RegionSelectCrossoverRegionFaces [get, set] |
| Returns or sets the option for including or removing the crossover region faces in the selection on the Region Tab page. More... | |
| unsafe bool | RegionSelectCrossoverVerticalFaces [get, set] |
| Returns or sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page. More... | |
| unsafe bool | RegionSelectUnknownFaces [get, set] |
| Returns or sets the option for including or removing the unknown faces in the selection on the Region Tab page. More... | |
| unsafe bool | RegionShowIncompleteLoops [get, set] |
| Returns or sets the option for turning on/off the highlight of the incomplete loop edges. More... | |
| unsafe bool | RegionShowInternalLoops [get, set] |
| Returns or sets the option for turning on/off the highlight of the internal loop edges. More... | |
| unsafe bool | RegionShowPartingEdges [get, set] |
| Returns or sets the option for turning on/off the highlight of the parting edges. More... | |
| unsafe NXOpen.NXColor | RegionUndefinedRegionColor [get, set] |
| Returns or sets the color for applying to the undefined region faces on the Region Tab page. More... | |
| Properties inherited from NXOpen.Builder | |
| unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
| Returns the preview builder subobject. More... | |
| Properties inherited from NXOpen.TaggedObject | |
| Tag | Tag [get] |
| Returns the tag of this object. More... | |
| Properties inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageSink | NextSink [get] |
| Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
| Protected Member Functions inherited from NXOpen.TaggedObject | |
| new void | initialize () |
| <exclude> More... | |
Represents a builder to be used to perform Molded Part Validation analysis.
To create a new instance of this class, use NXOpen.Tooling.MWMoldedPartValidationManager.CreateMWMoldedPartValidationBuilder
Default values.
| Property | Value |
|---|---|
|
CalculationOption |
KeepExisting |
|
FaceDraftAngleLimit |
3 |
|
FaceHighlightSelectedFaces |
1 |
|
FaceNonSelectedFacesTranslucency |
0 |
|
FaceSelectAllFaces |
0 |
|
FaceSelectCrossoverFaces |
0 |
|
FaceSelectNegativeFaces1 |
0 |
|
FaceSelectNegativeFaces2 |
0 |
|
FaceSelectPositiveFaces1 |
0 |
|
FaceSelectPositiveFaces2 |
0 |
|
FaceSelectUndercutAreas |
0 |
|
FaceSelectUndercutEdges |
0 |
|
FaceSelectVerticalFaces |
0 |
|
FaceSelectedFacesTranslucency |
0 |
|
InformationCheckScope |
FaceProperties |
|
InformationLowerLimit |
0 |
|
InformationLowerLimitR01 |
5.5 |
|
InformationLowerLimitR02 |
5 |
|
InformationLowerLimitR03 |
4.5 |
|
InformationLowerLimitR04 |
4 |
|
InformationLowerLimitR05 |
3.5 |
|
InformationLowerLimitR06 |
3 |
|
InformationLowerLimitR07 |
2.5 |
|
InformationLowerLimitR08 |
2 |
|
InformationLowerLimitR09 |
1.5 |
|
InformationLowerLimitR10 |
1 |
|
InformationLowerLimitR11 |
0.5 |
|
InformationLowerLimitR12 |
0 |
|
InformationRangeType |
Uniform |
|
InformationSharpAngleLimit |
6 |
|
InformationShowBoundaryEdges |
0 |
|
InformationShowRangeR01 |
0 |
|
InformationShowRangeR02 |
0 |
|
InformationShowRangeR03 |
0 |
|
InformationShowRangeR04 |
0 |
|
InformationShowRangeR05 |
0 |
|
InformationShowRangeR06 |
0 |
|
InformationShowRangeR07 |
0 |
|
InformationShowRangeR08 |
0 |
|
InformationShowRangeR09 |
0 |
|
InformationShowRangeR10 |
0 |
|
InformationShowRangeR11 |
0 |
|
InformationShowRangeR12 |
0 |
|
InformationShowSharpEdges |
0 |
|
InformationUpperLimit |
6 |
|
InformationUpperLimitR01 |
6 |
|
InformationUpperLimitR02 |
5.5 |
|
InformationUpperLimitR03 |
5 |
|
InformationUpperLimitR04 |
4.5 |
|
InformationUpperLimitR05 |
4 |
|
InformationUpperLimitR06 |
3.5 |
|
InformationUpperLimitR07 |
3 |
|
InformationUpperLimitR08 |
2.5 |
|
InformationUpperLimitR09 |
2 |
|
InformationUpperLimitR10 |
0.5 |
|
InformationUpperLimitR11 |
1 |
|
InformationUpperLimitR12 |
0.5 |
|
InformationUseSingleTolerance |
0 |
|
RegionAssignToRegionOption |
CavityRegion |
|
RegionCavityRegionTranslucency |
0 |
|
RegionCoreRegionTranslucency |
0 |
|
RegionSelectCrossoverRegionFaces |
0 |
|
RegionSelectCrossoverVerticalFaces |
0 |
|
RegionSelectUnknownFaces |
0 |
|
RegionShowIncompleteLoops |
1 |
|
RegionShowInternalLoops |
1 |
|
RegionShowPartingEdges |
1 |
Created in NX8.0.0
|
inline |
Calculate button on the Calculate Tab page.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Action button for setting color on all faces on the Face Tab page.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Initialize the MPV data for performing analysis in Molded Part Validation.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| changeBody | 0: No change in the selected body; 1: Change in the selected body; 2: Change in direction for the selected body. |
|
inline |
Perform model properties calculation if the calculation has not been performed before.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Perform the sharp corners calculation if the calculation has not been performed before.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Action button for invoking the Split Face command on the Face Tab page.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Action button for setting color on the cavity, core and undefined region faces on the Region Tab page.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Set the product body to be analyzed on the Calculate Tab page.
Created in NX10.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| calculationProductBody | The product body |
|
inline |
Update the eject direction.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Update the sharp edges information based on the new sharp angle limit which has been changed by the user.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
inline |
Update the small radius faces information based on the new range limits of the radius which has been changed by the user.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the active tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the draw direction on the Calculate Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the calculation option on the Calculate Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
get |
Returns the product body to be analyzed on the Calculate Tab page.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to all faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the crossover faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the draft angle limit on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for highlighting the selected faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the negative small radius faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the negative faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the translucency for the non-selected faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the positive faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the positive small radius faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the selection of all faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the crossover faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the translucency for the selected faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the negative faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the positive faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the undercut edges on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the vertical faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the undercut area faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the undercut edges on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the vertical faces on the Face Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the flag that indicates the Apply status of the command, needed only in the interactive environment.
0: "Apply" has not been done before; 1: "Apply" has been done before.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the check scope on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
get |
Returns the face selected face for displaying the face properties.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of the range limit values on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the lower limit of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the range type on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the sharp angle limit on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the upper limit of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for using a single tolerance for defining the range limit values on the Information Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the cavity region faces on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the translucency for applying to the cavity region faces on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the core region faces on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the translucency for applying to the core region faces on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
get |
Returns the faces selected for assigning to the cavity or core region.
Created in NX8.0.0
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for including or removing the crossover region faces in the selection on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for including or removing the unknown faces in the selection on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the incomplete loop edges.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the internal loop edges.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the option for turning on/off the highlight of the parting edges.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
|
getset |
Returns or sets the color for applying to the undefined region faces on the Region Tab page.
Created in NX8.0.0
License requirements to get this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
License requirements to set this property: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
