NXOpen .NET Reference Guide
1899
|
Used in the YBC bend reports. More...
Public Attributes | |
double | B |
The rotation angle in degrees about the Y axis of the stock. More... | |
double | C |
The rotation angle in degrees about the Z axis of the stock. More... | |
double | Radius |
Radius of the bend. More... | |
double | Y |
The length along the stock before the bend. More... | |
Used in the YBC bend reports.
The last bend value isn't actually a bend. The only valid value is the Y value, which is the length after the last bend. All values are relative, meaning they are calculated from the previous bend. So if bend1 has B value of 90 degrees and bend2 has a B value of 90 degrees, then the pipe has rotated 180 degrees about the Y axis.
double NXOpen.Routing.BendReportManager.YbcReport.B |
The rotation angle in degrees about the Y axis of the stock.
double NXOpen.Routing.BendReportManager.YbcReport.C |
The rotation angle in degrees about the Z axis of the stock.
double NXOpen.Routing.BendReportManager.YbcReport.Radius |
Radius of the bend.
double NXOpen.Routing.BendReportManager.YbcReport.Y |
The length along the stock before the bend.