This is the builder class to create or edit a Measure object. More...

Inheritance diagram for NXOpen.Motion.PackagingMeasureBuilder:

Classes
struct	_GeometryData
	Represents geometry data.

struct	GeometryData
	Represents geometry data. More...

Public Types
enum	MeasureCondition { LessThan, GreaterThan, EqualTo }
	Measure condition More...

enum	MeasureType { MinimumDistance, Angle }
	Measure type More...

Public Member Functions
unsafe NXOpen.DisplayableObject[]	GetList2 ()
	Returns the geometry list 2 of NXOpen.Motion.PackagingMeasure object. More...

unsafe void	GetSourceList (out NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] sourceGeometryData)
	Gets the source geometry data. More...

unsafe void	GetTargetList (out NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] targetGeometryData)
	Gets the target geometry data. More...

unsafe void	SetList2 (NXOpen.DisplayableObject[] list2)
	Sets the geometry list 2. More...

unsafe void	SetSourceList (NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] sourceGeometryData)
	Sets the source geometry data. More...

unsafe void	SetTargetList (NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] targetGeometryData)
	Sets the target geometry data. More...

Public Member Functions inherited from NXOpen.Motion.PackagingBuilder
unsafe NXOpen.DisplayableObject[]	GetList1 ()
	Returns geometry list 1 of NXOpen.Motion.Packaging object. More...

unsafe void	SetList1 (NXOpen.DisplayableObject[] list1)
	Sets geometry list 1. More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Motion.PackagingMeasureBuilder.MeasureCondition	Condition `[get, set]`
	Returns or sets the measure condition defined at NXOpen.Motion.PackagingMeasureBuilder.MeasureCondition More...

unsafe NXOpen.Motion.PackagingMeasureBuilder.MeasureType	MsType `[get, set]`
	Returns or sets the Measure type defined at NXOpen.Motion.PackagingMeasureBuilder.MeasureType More...

unsafe bool	StopOnEvent `[get, set]`
	Returns or sets the Stop_On_Event flag of NXOpen.Motion.PackagingMeasure object More...

unsafe NXOpen.Expression	ThresholdAngleExpression `[get]`
	Returns the Measure angular threshold expression value More...

unsafe NXOpen.Expression	ThresholdExpression `[get]`
	Returns the Measure threshold expression value More...

unsafe NXOpen.Expression	ToleranceAngleExpression `[get]`
	Returns the Measure angular tolerance expression value More...

unsafe NXOpen.Expression	ToleranceExpression `[get]`
	Returns the Measure tolerance expression value More...

Properties inherited from NXOpen.Motion.PackagingBuilder
unsafe bool	Enable `[get, set]`
	Returns or sets the enable flag of NXOpen.Motion.Packaging object. More...

unsafe string	Name `[get, set]`
	Returns or sets the name of NXOpen.Motion.Packaging object. More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

This is the builder class to create or edit a Measure object.

To create a new instance of this class, use NXOpen.Motion.PackagingCollection.CreateMeasureBuilder

Created in NX4.0.0

Member Enumeration Documentation

enum NXOpen.Motion.PackagingMeasureBuilder.MeasureCondition

Measure condition

Enumerator
LessThan	Stop event defined by minimum measurement less than threshold value.
GreaterThan	Stop event defined by minimum measurement greater than threshold value.
EqualTo	Stop event defined by minimum measurement equal to threshold (target) value.

enum NXOpen.Motion.PackagingMeasureBuilder.MeasureType

Measure type

Enumerator
MinimumDistance	Measure minimum distance between objects.
Angle	Measure angle between lines or linear edges.

Member Function Documentation

unsafe NXOpen.DisplayableObject [] NXOpen.Motion.PackagingMeasureBuilder.GetList2 ( )

inline

Returns the geometry list 2 of NXOpen.Motion.PackagingMeasure object.

Measure can have one or two lists defined. If the user defines two lists, then measurements will be done between each object in list 1 against each object in list 2.

Created in NX4.0.0

License requirements: mechanisms ("MECHANISMS")

Returns

unsafe void NXOpen.Motion.PackagingMeasureBuilder.GetSourceList ( out NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] sourceGeometryData )

inline

Gets the source geometry data.

Created in NX7.5.0

License requirements: mechanisms ("MECHANISMS")

Parameters

sourceGeometryData Source geometry data

unsafe void NXOpen.Motion.PackagingMeasureBuilder.GetTargetList ( out NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] targetGeometryData )

inline

Gets the target geometry data.

Created in NX7.5.0

License requirements: mechanisms ("MECHANISMS")

Parameters

targetGeometryData Target geometry data

unsafe void NXOpen.Motion.PackagingMeasureBuilder.SetList2 ( NXOpen.DisplayableObject[] list2 )

inline

Sets the geometry list 2.

Created in NX4.0.0

License requirements: mechanisms ("MECHANISMS")

Parameters

list2

unsafe void NXOpen.Motion.PackagingMeasureBuilder.SetSourceList ( NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] sourceGeometryData )

inline

Sets the source geometry data.

Created in NX7.5.0

License requirements: mechanisms ("MECHANISMS")

Parameters

sourceGeometryData Source geometry data

unsafe void NXOpen.Motion.PackagingMeasureBuilder.SetTargetList ( NXOpen.Motion.PackagingMeasureBuilder.GeometryData[] targetGeometryData )

inline

Sets the target geometry data.

Created in NX7.5.0

License requirements: mechanisms ("MECHANISMS")

Parameters

targetGeometryData Target geometry data

Property Documentation

unsafe NXOpen.Motion.PackagingMeasureBuilder.MeasureCondition NXOpen.Motion.PackagingMeasureBuilder.Condition

getset

Returns or sets the measure condition defined at NXOpen.Motion.PackagingMeasureBuilder.MeasureCondition

Created in NX4.0.0

License requirements to get this property: mechanisms ("MECHANISMS")

License requirements to set this property: mechanisms ("MECHANISMS")

unsafe NXOpen.Motion.PackagingMeasureBuilder.MeasureType NXOpen.Motion.PackagingMeasureBuilder.MsType

getset

Returns or sets the Measure type defined at NXOpen.Motion.PackagingMeasureBuilder.MeasureType

Created in NX4.0.0

License requirements to get this property: mechanisms ("MECHANISMS")

License requirements to set this property: mechanisms ("MECHANISMS")

unsafe bool NXOpen.Motion.PackagingMeasureBuilder.StopOnEvent

getset

Returns or sets the Stop_On_Event flag of NXOpen.Motion.PackagingMeasure object

Created in NX4.0.0

License requirements to get this property: mechanisms ("MECHANISMS")

License requirements to set this property: mechanisms ("MECHANISMS")

unsafe NXOpen.Expression NXOpen.Motion.PackagingMeasureBuilder.ThresholdAngleExpression

get

Returns the Measure angular threshold expression value

Created in NX8.0.0

License requirements: mechanisms ("MECHANISMS")

unsafe NXOpen.Expression NXOpen.Motion.PackagingMeasureBuilder.ThresholdExpression

get

Returns the Measure threshold expression value

Created in NX8.0.0

License requirements: mechanisms ("MECHANISMS")

unsafe NXOpen.Expression NXOpen.Motion.PackagingMeasureBuilder.ToleranceAngleExpression

get

Returns the Measure angular tolerance expression value

Created in NX8.0.0

License requirements: mechanisms ("MECHANISMS")

unsafe NXOpen.Expression NXOpen.Motion.PackagingMeasureBuilder.ToleranceExpression

get

Returns the Measure tolerance expression value

Created in NX8.0.0

License requirements: mechanisms ("MECHANISMS")

The documentation for this class was generated from the following file:

Motion_PackagingMeasureBuilder.cs

Classes

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation