Represents a NXOpen.Mechatronics.CamProfile builder. More...

Inheritance diagram for NXOpen.Mechatronics.CamProfileBuilder:

Classes
struct	_Element
	Contains segment information of a motion segment

struct	Element
	Contains segment information of a motion segment More...

Public Types
enum	MasterValueUnit { Linear, Rotary, Time }
	The master value unit indicates which type master joint is. More...

enum	ProfileCyclicType { RelativeCyclic, Cyclic, NonCyclic }
	Indicates which cyclic type should be take. More...

enum	SlaveValueUnit { LinearPosition, RotaryPosition, LinearSpeed, RotarySpeed }
	The master value unit indicates which type master joint is. More...

Public Member Functions
unsafe void	AddElement (NXOpen.NXObject part, NXOpen.Mechatronics.CamProfileBuilder.Element element)
	Add element to builder. More...

unsafe NXOpen.Mechatronics.CamProfileBuilder.Element	AskElementByIndex (int index)
	Ask segment element. More...

unsafe int	AskElementsLength ()
	Ask segments length. More...

unsafe void	ClearElements ()
	Clear elements . More...

unsafe void	EditElement (int index, NXOpen.NXObject part, NXOpen.Mechatronics.CamProfileBuilder.Element element)
	Edit the specific element of builder. More...

unsafe int	FindElementIndex (NXOpen.Mechatronics.CamProfileBuilder.Element element)
	Find the element index. More...

unsafe void	RemoveElementByIndex (int index)
	Remove element by index. More...

unsafe void	SetSegmentTable (NXOpen.Mechatronics.CamProfile segmentTableObject)
	Set segment table. More...

unsafe void	SwitchSegmentTable (NXOpen.Mechatronics.CamProfile segmentTableObject)
	Switch segments table object. More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe bool	CheckingG2Continuity `[get, set]`
	Returns or sets the indicator that a cam profile should check G2 continuous or not More...

unsafe NXOpen.Mechatronics.CamProfileBuilder.ProfileCyclicType	CyclicType `[get, set]`
	Returns or sets the cyclic type of a cam profile More...

unsafe NXOpen.Expression	MasterMaximum `[get]`
	Returns the maximum master value More...

unsafe NXOpen.Expression	MasterMinimum `[get]`
	Returns the minimum master value More...

unsafe NXOpen.Mechatronics.CamProfileBuilder.MasterValueUnit	MasterUnit `[get, set]`
	Returns or sets the type of master joint More...

unsafe string	Name `[get, set]`
	Returns or sets the cam profile name More...

unsafe NXOpen.Expression	SlaveMaximum `[get]`
	Returns the maximum slave value. More...

unsafe NXOpen.Expression	SlaveMinimum `[get]`
	Returns the minimum slave More...

unsafe NXOpen.Mechatronics.CamProfileBuilder.SlaveValueUnit	SlaveUnit `[get, set]`
	Returns or sets the type of slave joint or slave controller More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a NXOpen.Mechatronics.CamProfile builder.

To create a new instance of this class, use NXOpen.Mechatronics.CamProfileCollection.CreateCamProfileBuilder

Created in NX9.0.0

Member Enumeration Documentation

enum NXOpen.Mechatronics.CamProfileBuilder.MasterValueUnit

The master value unit indicates which type master joint is.

Enumerator
Linear	Linear
Rotary	Rotary
Time	Time

enum NXOpen.Mechatronics.CamProfileBuilder.ProfileCyclicType

Indicates which cyclic type should be take.

The type of Cam Profile can be switched between non-cyclic, cyclic and relative cyclic

Enumerator

RelativeCyclic

In Relative Cyclic Cam Profiles the start point and end point of the profile do not necessarily have to be equal.

Cyclic

In Cyclic Cam Profiles the points at the beginning and the end of the Master Axis range need to be identical with respect to Slave Axis value, slope and curve.

NonCyclic

Non-cyclic Cam Profiles are defined only in the defined master axis range.

Exceeding this range will cause an error.

enum NXOpen.Mechatronics.CamProfileBuilder.SlaveValueUnit

The master value unit indicates which type master joint is.

Enumerator
LinearPosition	Linear Position
RotaryPosition	Rotary Position
LinearSpeed	Linear Speed
RotarySpeed	Rotary Speed

Member Function Documentation

unsafe void NXOpen.Mechatronics.CamProfileBuilder.AddElement	(	NXOpen.NXObject	part,
		NXOpen.Mechatronics.CamProfileBuilder.Element	element
	)

inline

Add element to builder.

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

part
element

unsafe NXOpen.Mechatronics.CamProfileBuilder.Element NXOpen.Mechatronics.CamProfileBuilder.AskElementByIndex ( int index )

inline

Ask segment element.

Created in NX10.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

index

Returns

unsafe int NXOpen.Mechatronics.CamProfileBuilder.AskElementsLength ( )

inline

Ask segments length.

Created in NX10.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Returns

unsafe void NXOpen.Mechatronics.CamProfileBuilder.ClearElements ( )

inline

Clear elements .

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

unsafe void NXOpen.Mechatronics.CamProfileBuilder.EditElement	(	int	index,
		NXOpen.NXObject	part,
		NXOpen.Mechatronics.CamProfileBuilder.Element	element
	)

inline

Edit the specific element of builder.

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

index	The element index
part
element

unsafe int NXOpen.Mechatronics.CamProfileBuilder.FindElementIndex ( NXOpen.Mechatronics.CamProfileBuilder.Element element )

inline

Find the element index.

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

element

Returns

unsafe void NXOpen.Mechatronics.CamProfileBuilder.RemoveElementByIndex ( int index )

inline

Remove element by index.

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

index

unsafe void NXOpen.Mechatronics.CamProfileBuilder.SetSegmentTable ( NXOpen.Mechatronics.CamProfile segmentTableObject )

inline

Set segment table.

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

segmentTableObject

unsafe void NXOpen.Mechatronics.CamProfileBuilder.SwitchSegmentTable ( NXOpen.Mechatronics.CamProfile segmentTableObject )

inline

Switch segments table object.

Created in NX12.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

Parameters

segmentTableObject

Property Documentation

unsafe bool NXOpen.Mechatronics.CamProfileBuilder.CheckingG2Continuity

getset

Returns or sets the indicator that a cam profile should check G2 continuous or not

Created in NX10.0.0

License requirements to get this property: nx_mcd_core ("Mechatronics Concept Designer")

License requirements to set this property: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Mechatronics.CamProfileBuilder.ProfileCyclicType NXOpen.Mechatronics.CamProfileBuilder.CyclicType

getset

Returns or sets the cyclic type of a cam profile

Created in NX9.0.0

License requirements to get this property: nx_mcd_core ("Mechatronics Concept Designer")

License requirements to set this property: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Expression NXOpen.Mechatronics.CamProfileBuilder.MasterMaximum

get

Returns the maximum master value

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Expression NXOpen.Mechatronics.CamProfileBuilder.MasterMinimum

get

Returns the minimum master value

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Mechatronics.CamProfileBuilder.MasterValueUnit NXOpen.Mechatronics.CamProfileBuilder.MasterUnit

getset

Returns or sets the type of master joint

Created in NX9.0.0

License requirements to get this property: nx_mcd_core ("Mechatronics Concept Designer")

License requirements to set this property: nx_mcd_core ("Mechatronics Concept Designer")

unsafe string NXOpen.Mechatronics.CamProfileBuilder.Name

getset

Returns or sets the cam profile name

Created in NX9.0.0

License requirements to get this property: nx_mcd_core ("Mechatronics Concept Designer")

License requirements to set this property: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Expression NXOpen.Mechatronics.CamProfileBuilder.SlaveMaximum

get

Returns the maximum slave value.

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Expression NXOpen.Mechatronics.CamProfileBuilder.SlaveMinimum

get

Returns the minimum slave

Created in NX9.0.0

License requirements: nx_mcd_core ("Mechatronics Concept Designer")

unsafe NXOpen.Mechatronics.CamProfileBuilder.SlaveValueUnit NXOpen.Mechatronics.CamProfileBuilder.SlaveUnit

getset

Returns or sets the type of slave joint or slave controller

Created in NX9.0.0

License requirements to get this property: nx_mcd_core ("Mechatronics Concept Designer")

License requirements to set this property: nx_mcd_core ("Mechatronics Concept Designer")

The documentation for this class was generated from the following file:

Mechatronics_CamProfileBuilder.cs

Classes

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation