Represents a utils of line designer for journaling uinode methods More...

Inheritance diagram for NXOpen.LineDesigner.UINodeUtils:

Public Member Functions
unsafe void	CalculateAndSetNameOfAGAttr (NXOpen.PDM.AttributeGroup attributeGroup, string subAGName, string resourceName)
	To calculate and set attribute group name More...

unsafe void	DeleteConstraint (NXOpen.NXObject constraintTag)
	To delete constraint More...

unsafe string	GetItemRevisionName (NXOpen.Part partTag)
	To get item revision name More...

unsafe string	GetOccurrenceName (NXOpen.NXObject instanceTag)
	To get occurence name More...

unsafe void	MoveConnectors (NXOpen.NXObject partOccTag, NXOpen.NXObject targ, double value, bool isNotBondConstraint, bool isPropogationAllowed)
	To move connectors while DnD of assembly More...

unsafe void	MoveToolToOriginalPosition (NXOpen.LineDesigner.MountBuilder mountBuilder, NXOpen.NXObject toolBaseConnectorTag)
	Move Tool to original position More...

unsafe void	MoveToolToRobotAndOrientAsPerConnector (NXOpen.LineDesigner.MountBuilder mountBuilder)
	Move Tool to Robot and orient as per connector More...

unsafe void	Rename (NXOpen.LineDesigner.ModelProductionUnit objtg, string newName)
	To rename partition More...

unsafe void	RenamePartition (NXOpen.Assemblies.Partition objtg, string newName)
	To rename partition in new PLNAV More...

unsafe void	RetreiveFinalTransformedToolConnectorDetailsAfterMoveAndMount (NXOpen.LineDesigner.MountBuilder builderTag, out NXOpen.Point3d finalTransformedToolConnectorPointAfterMoveAndMount, out NXOpen.Vector3d finalTransformedToolConnectorXDirAfterMoveAndMount, out NXOpen.Vector3d finalTransformedToolConnectorYDirAfterMoveAndMount)
	Retreive final tool transformation parameters More...

unsafe void	SaveFinalTransformedToolConnectorDetailsAfterMoveAndMount (NXOpen.LineDesigner.MountBuilder builderTag, NXOpen.Point3d finalTransformedToolConnectorPointAfterMoveAndMount, NXOpen.Vector3d finalTransformedToolConnectorXDirAfterMoveAndMount, NXOpen.Vector3d finalTransformedToolConnectorYDirAfterMoveAndMount)
	Save final tool transformation parameters More...

unsafe void	SetColumnOccurrenceType (NXOpen.NXObject partOcc, string newPropertyValu)
	Set column occurrence type For Edit In Cell More...

unsafe void	SetItemRevisionName (NXOpen.Part partTag, string itemRevName)
	To set item revision name More...

unsafe void	SetOccurrenceName (NXOpen.NXObject instanceTag, string occurrenceName)
	To set occurence name More...

unsafe void	SetProductionUnitAsWorkPart (NXOpen.NXObject constraintTag)
	Set Target Production Unit More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Static Public Member Functions
static UINodeUtils	GetUINodeUtils (NXOpen.Session owner)
	Returns the UINodeUtils object for the running session which serves as the 'gateway' class for the application API. More...

Properties
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.Utilities.NXRemotableObject
void	initialize ()
	<exclude> More...

Detailed Description

Represents a utils of line designer for journaling uinode methods

Use the static method in this class to obtain an instance.

Created in NX9.0.0

Member Function Documentation

unsafe void NXOpen.LineDesigner.UINodeUtils.CalculateAndSetNameOfAGAttr	(	NXOpen.PDM.AttributeGroup	attributeGroup,
		string	subAGName,
		string	resourceName
	)

inline

To calculate and set attribute group name

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

attributeGroup
subAGName
resourceName

unsafe void NXOpen.LineDesigner.UINodeUtils.DeleteConstraint ( NXOpen.NXObject constraintTag )

inline

To delete constraint

Created in NX11.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

constraintTag

unsafe string NXOpen.LineDesigner.UINodeUtils.GetItemRevisionName ( NXOpen.Part partTag )

inline

To get item revision name

Created in NX10.0.3

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

partTag

Returns

unsafe string NXOpen.LineDesigner.UINodeUtils.GetOccurrenceName ( NXOpen.NXObject instanceTag )

inline

To get occurence name

Created in NX11.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

instanceTag

Returns

static UINodeUtils NXOpen.LineDesigner.UINodeUtils.GetUINodeUtils ( NXOpen.Session owner )

inlinestatic

Returns the UINodeUtils object for the running session which serves as the 'gateway' class for the application API.

References to all other objects in this API are obtained either directly or indirectly via methods and properties on this class. Platform Session should be initialized using 'GetSession' method from NXOpen API prior to this call.

unsafe void NXOpen.LineDesigner.UINodeUtils.MoveConnectors	(	NXOpen.NXObject	partOccTag,
		NXOpen.NXObject	targ,
		double	value,
		bool	isNotBondConstraint,
		bool	isPropogationAllowed
	)

inline

To move connectors while DnD of assembly

Created in NX11.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

partOccTag
targ
value
isNotBondConstraint
isPropogationAllowed

unsafe void NXOpen.LineDesigner.UINodeUtils.MoveToolToOriginalPosition	(	NXOpen.LineDesigner.MountBuilder	mountBuilder,
		NXOpen.NXObject	toolBaseConnectorTag
	)

inline

Move Tool to original position

Created in NX12.0.2

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

mountBuilder
toolBaseConnectorTag

unsafe void NXOpen.LineDesigner.UINodeUtils.MoveToolToRobotAndOrientAsPerConnector ( NXOpen.LineDesigner.MountBuilder mountBuilder )

inline

Move Tool to Robot and orient as per connector

Created in NX12.0.2

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

mountBuilder

unsafe void NXOpen.LineDesigner.UINodeUtils.Rename	(	NXOpen.LineDesigner.ModelProductionUnit	objtg,
		string	newName
	)

inline

To rename partition

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

objtg
newName

unsafe void NXOpen.LineDesigner.UINodeUtils.RenamePartition	(	NXOpen.Assemblies.Partition	objtg,
		string	newName
	)

inline

To rename partition in new PLNAV

Created in NX12.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

objtg
newName

unsafe void NXOpen.LineDesigner.UINodeUtils.RetreiveFinalTransformedToolConnectorDetailsAfterMoveAndMount	(	NXOpen.LineDesigner.MountBuilder	builderTag,
		out NXOpen.Point3d	finalTransformedToolConnectorPointAfterMoveAndMount,
		out NXOpen.Vector3d	finalTransformedToolConnectorXDirAfterMoveAndMount,
		out NXOpen.Vector3d	finalTransformedToolConnectorYDirAfterMoveAndMount
	)

inline

Retreive final tool transformation parameters

Created in NX12.0.2

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

builderTag
finalTransformedToolConnectorPointAfterMoveAndMount
finalTransformedToolConnectorXDirAfterMoveAndMount
finalTransformedToolConnectorYDirAfterMoveAndMount

unsafe void NXOpen.LineDesigner.UINodeUtils.SaveFinalTransformedToolConnectorDetailsAfterMoveAndMount	(	NXOpen.LineDesigner.MountBuilder	builderTag,
		NXOpen.Point3d	finalTransformedToolConnectorPointAfterMoveAndMount,
		NXOpen.Vector3d	finalTransformedToolConnectorXDirAfterMoveAndMount,
		NXOpen.Vector3d	finalTransformedToolConnectorYDirAfterMoveAndMount
	)

inline

Save final tool transformation parameters

Created in NX12.0.2

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

builderTag
finalTransformedToolConnectorPointAfterMoveAndMount
finalTransformedToolConnectorXDirAfterMoveAndMount
finalTransformedToolConnectorYDirAfterMoveAndMount

unsafe void NXOpen.LineDesigner.UINodeUtils.SetColumnOccurrenceType	(	NXOpen.NXObject	partOcc,
		string	newPropertyValu
	)

inline

Set column occurrence type For Edit In Cell

Created in NX1847.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

partOcc
newPropertyValu

unsafe void NXOpen.LineDesigner.UINodeUtils.SetItemRevisionName	(	NXOpen.Part	partTag,
		string	itemRevName
	)

inline

To set item revision name

Created in NX10.0.3

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

partTag
itemRevName

unsafe void NXOpen.LineDesigner.UINodeUtils.SetOccurrenceName	(	NXOpen.NXObject	instanceTag,
		string	occurrenceName
	)

inline

To set occurence name

Created in NX11.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

instanceTag
occurrenceName

unsafe void NXOpen.LineDesigner.UINodeUtils.SetProductionUnitAsWorkPart ( NXOpen.NXObject constraintTag )

inline

Set Target Production Unit

Created in NX12.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

Parameters

constraintTag

Property Documentation

Tag NXOpen.LineDesigner.UINodeUtils.Tag

get

Returns the tag of this object.

The documentation for this class was generated from the following file:

LineDesigner_UINodeUtils.cs

Public Member Functions

Static Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

Property Documentation