Create a AnalysisObjectCollection More...

Inheritance diagram for NXOpen.GeometricAnalysis.AnalysisObjectCollection:

Public Member Functions
unsafe NXOpen.GeometricAnalysis.CurveAnalysisCombsBuilder	CreateCurveAnalysisCombsBuilder ()
	Creates a curve analysis combs builder More...

unsafe NXOpen.GeometricAnalysis.CurveAnalysisInflectionsBuilder	CreateCurveAnalysisInflectionsBuilder ()
	Creates a curve analysis inflections builder More...

unsafe NXOpen.GeometricAnalysis.CurveAnalysisPeaksBuilder	CreateCurveAnalysisPeaksBuilder ()
	Creates a curve analysis peaks builder More...

unsafe NXOpen.GeometricAnalysis.CurveContinuityBuilder	CreateCurveContinuityBuilder (NXOpen.DisplayableObject ccaoObject)
	Creates a Curve Continuity Builder More...

unsafe NXOpen.GeometricAnalysis.CurveCurvatureAnalysisBuilder	CreateCurveCurvatureAnalysisBuilder (NXOpen.DisplayableObject caaoObject)
	Creates a curve curvature analysis builder More...

unsafe NXOpen.GeometricAnalysis.DeviationGaugeBuilder	CreateDeviationGaugeBuilder (NXOpen.DisplayableObject ddaoObject)
	Creates a Deviation Gauge Builder More...

unsafe NXOpen.GeometricAnalysis.DraftAnalysisBuilder	CreateDraftAnalysisBuilder (NXOpen.DisplayableObject daoObject)
	Creates a draft analysis builder More...

unsafe NXOpen.GeometricAnalysis.FaceCurvatureAnalysisBuilder	CreateFaceCurvatureAnalysisBuilder (NXOpen.DisplayableObject fcaoObject)
	Creates a face curvature analysis builder More...

unsafe NXOpen.GeometricAnalysis.GapFlushnessBuilder	CreateGapFlushnessBuilder (NXOpen.GeometricAnalysis.GapFlushness gfaoObject)
	Creates a gap and flushness builder More...

unsafe NXOpen.GeometricAnalysis.HighlightLinesAnalysisBuilder	CreateHighlightLinesAnalysisBuilder (NXOpen.DisplayableObject hpaoObject)
	Creates a Highlight Lines Analysis builder More...

unsafe NXOpen.GeometricAnalysis.LocalRadiusAnalysisBuilder	CreateLocalRadiusAnalysisBuilder (NXOpen.GeometricAnalysis.LocalRadiusAnalysis lrao)
	Creates a NXOpen.GeometricAnalysis.LocalRadiusAnalysisBuilder More...

unsafe NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder	CreateSectionAnalysisBuilder (NXOpen.GeometricAnalysis.SectionAnalysisObject msaoObject)
	Creates a Section Analysis object builder More...

unsafe NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder	CreateSectionAnalysisExBuilder (NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExObject csaoObject)
	Creates a Section Analysis builder of a new version More...

unsafe NXOpen.GeometricAnalysis.SurfaceContinuityAnalysisBuilder	CreateSurfaceContinuityAnalysisBuilder (NXOpen.DisplayableObject scaoObject)
	Creates a surface continuity analysis builder More...

unsafe NXOpen.GeometricAnalysis.SurfaceIntersectionBuilder	CreateSurfaceIntersectionBuilder (NXOpen.DisplayableObject siaoObject)
	Creates a surface intersection builder More...

NXOpen.GeometricAnalysis.AnalysisObject[]	ToArray ()
	Returns an array of NXOpen.GeometricAnalysis.AnalysisObject objects. More...

Public Member Functions inherited from NXOpen.TaggedObjectCollection
IEnumerator	GetEnumerator ()
	Returns an enumerator that iterates through a collection. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Protected Member Functions
override int	EnumerateMoveNext (ref Tag currentTag, byte[] state)
	Advances the enumerator to the next element of the collection. More...

Protected Member Functions inherited from NXOpen.TaggedObjectCollection
new void	initialize ()
	<exclude> More...

Protected Member Functions inherited from NXOpen.Utilities.NXRemotableObject
void	initialize ()
	<exclude> More...

Properties
NXOpen.GeometricAnalysis.AnalysisObjectCollectionEx	AnalysisObjectsEx `[get]`
	Returns the AnalysisObjectCollectionEx instance belonging to this part More...

NXOpen.GeometricAnalysis.CurveAnalysisDisplay	CurveAnalysisDisplayObject `[get]`
	Returns object for displaying curve analysis information More...

NXOpen.GeometricAnalysis.SurfaceAnalysisDisplay	SurfaceAnalysisDisplayObject `[get]`
	Returns object for displaying surface analysis information More...

Tag	Tag `[get]`
	Returns the tag of this object. More...

Detailed Description

Create a AnalysisObjectCollection

To obtain an instance of this class, refer to NXOpen.GeometricAnalysis.AnalysisManager

Created in NX5.0.0

Member Function Documentation

unsafe NXOpen.GeometricAnalysis.CurveAnalysisCombsBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateCurveAnalysisCombsBuilder ( )

inline

Creates a curve analysis combs builder

Created in NX6.0.0

Deprecated in NX8.5.0. Use NXOpen.GeometricAnalysis.CurveCurvatureAnalysis .

License requirements: solid_modeling ("SOLIDS MODELING")

Returns: Curve analysis Combs Builder

unsafe NXOpen.GeometricAnalysis.CurveAnalysisInflectionsBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateCurveAnalysisInflectionsBuilder ( )

inline

Creates a curve analysis inflections builder

Created in NX6.0.0

Deprecated in NX8.5.0. Use NXOpen.GeometricAnalysis.CurveCurvatureAnalysis .

License requirements: solid_modeling ("SOLIDS MODELING")

Returns: Curve analysis Inflections Builder

unsafe NXOpen.GeometricAnalysis.CurveAnalysisPeaksBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateCurveAnalysisPeaksBuilder ( )

inline

Creates a curve analysis peaks builder

Created in NX6.0.0

Deprecated in NX8.5.0. Use NXOpen.GeometricAnalysis.CurveCurvatureAnalysis .

License requirements: solid_modeling ("SOLIDS MODELING")

Returns: Curve analysis Peaks Builder

unsafe NXOpen.GeometricAnalysis.CurveContinuityBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateCurveContinuityBuilder ( NXOpen.DisplayableObject ccaoObject )

inline

Creates a Curve Continuity Builder

Created in NX7.0.0

License requirements: gateway ("UG GATEWAY")

Parameters

ccaoObject CCAO

Returns: Curve Continuity AO builder

unsafe NXOpen.GeometricAnalysis.CurveCurvatureAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateCurveCurvatureAnalysisBuilder ( NXOpen.DisplayableObject caaoObject )

inline

Creates a curve curvature analysis builder

Created in NX7.0.0

License requirements: gateway ("UG GATEWAY")

Parameters

caaoObject Curve Curvature Analysis

Returns: Curve Curvature Analysis builder

unsafe NXOpen.GeometricAnalysis.DeviationGaugeBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateDeviationGaugeBuilder ( NXOpen.DisplayableObject ddaoObject )

inline

Creates a Deviation Gauge Builder

Created in NX6.0.0

License requirements: solid_modeling ("SOLIDS MODELING")

Parameters

ddaoObject DDAO

Returns: DeviationGauge builder

unsafe NXOpen.GeometricAnalysis.DraftAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateDraftAnalysisBuilder ( NXOpen.DisplayableObject daoObject )

inline

Creates a draft analysis builder

Created in NX8.0.0

License requirements: studio_analyze ("STUDIO ANALYZE")

Parameters

daoObject DAO

Returns: draft analysis builder

unsafe NXOpen.GeometricAnalysis.FaceCurvatureAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateFaceCurvatureAnalysisBuilder ( NXOpen.DisplayableObject fcaoObject )

inline

Creates a face curvature analysis builder

Created in NX9.0.0

License requirements: studio_analyze ("STUDIO ANALYZE")

Parameters

fcaoObject FCAO

Returns: face curvature analysis builder

unsafe NXOpen.GeometricAnalysis.GapFlushnessBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateGapFlushnessBuilder ( NXOpen.GeometricAnalysis.GapFlushness gfaoObject )

inline

Creates a gap and flushness builder

Created in NX5.0.0

License requirements: solid_modeling ("SOLIDS MODELING")

Parameters

gfaoObject Gap and Flushness

Returns: Gap and Flushness builder

unsafe NXOpen.GeometricAnalysis.HighlightLinesAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateHighlightLinesAnalysisBuilder ( NXOpen.DisplayableObject hpaoObject )

inline

Creates a Highlight Lines Analysis builder

Created in NX6.0.0

License requirements: studio_analyze ("STUDIO ANALYZE")

Parameters

hpaoObject Highlight Lines Analysis object

Returns: Highlight Lines Analysis builder

unsafe NXOpen.GeometricAnalysis.LocalRadiusAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateLocalRadiusAnalysisBuilder ( NXOpen.GeometricAnalysis.LocalRadiusAnalysis lrao )

inline

Creates a NXOpen.GeometricAnalysis.LocalRadiusAnalysisBuilder

Created in NX8.5.0

License requirements: None.

Parameters

lrao

Returns

unsafe NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateSectionAnalysisBuilder ( NXOpen.GeometricAnalysis.SectionAnalysisObject msaoObject )

inline

Creates a Section Analysis object builder

Created in NX6.0.0

License requirements: studio_analyze ("STUDIO ANALYZE")

Parameters

msaoObject Section Analysis object

Returns: Section Analysis builder

unsafe NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateSectionAnalysisExBuilder ( NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExObject csaoObject )

inline

Creates a Section Analysis builder of a new version

Created in NX7.0.0

License requirements: studio_analyze ("STUDIO ANALYZE")

Parameters

csaoObject Section Analysis object

Returns: Section Analysis builder

unsafe NXOpen.GeometricAnalysis.SurfaceContinuityAnalysisBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateSurfaceContinuityAnalysisBuilder ( NXOpen.DisplayableObject scaoObject )

inline

Creates a surface continuity analysis builder

Created in NX6.0.0

License requirements: gateway ("UG GATEWAY")

Parameters

scaoObject Surface Continuity Analysis

Returns: Surface Continuity Analysis builder

unsafe NXOpen.GeometricAnalysis.SurfaceIntersectionBuilder NXOpen.GeometricAnalysis.AnalysisObjectCollection.CreateSurfaceIntersectionBuilder ( NXOpen.DisplayableObject siaoObject )

inline

Creates a surface intersection builder

Created in NX7.5.0

License requirements: studio_analyze ("STUDIO ANALYZE")

Parameters

siaoObject surface intersection

Returns: surface intersection builder

override int NXOpen.GeometricAnalysis.AnalysisObjectCollection.EnumerateMoveNext	(	ref Tag	currentTag,
		byte[]	state
	)

inlineprotectedvirtual

Advances the enumerator to the next element of the collection.

Implements NXOpen.TaggedObjectCollection.

NXOpen.GeometricAnalysis.AnalysisObject [] NXOpen.GeometricAnalysis.AnalysisObjectCollection.ToArray ( )

inline

Returns an array of NXOpen.GeometricAnalysis.AnalysisObject objects.

Property Documentation

NXOpen.GeometricAnalysis.AnalysisObjectCollectionEx NXOpen.GeometricAnalysis.AnalysisObjectCollection.AnalysisObjectsEx

get

Returns the AnalysisObjectCollectionEx instance belonging to this part

Created in NX11.0.0

NXOpen.GeometricAnalysis.CurveAnalysisDisplay NXOpen.GeometricAnalysis.AnalysisObjectCollection.CurveAnalysisDisplayObject

get

Returns object for displaying curve analysis information

Created in NX3.0.0

NXOpen.GeometricAnalysis.SurfaceAnalysisDisplay NXOpen.GeometricAnalysis.AnalysisObjectCollection.SurfaceAnalysisDisplayObject

get

Returns object for displaying surface analysis information

Created in NX3.0.0

Tag NXOpen.GeometricAnalysis.AnalysisObjectCollection.Tag

get

Returns the tag of this object.

The documentation for this class was generated from the following file:

GeometricAnalysis_AnalysisObjectCollection.cs

Public Member Functions

Protected Member Functions

Properties

Detailed Description

Member Function Documentation

Property Documentation