NXOpen .NET Reference Guide
1899
|
Used to create a NXOpen.Features.ShipDesign.PillarTreatmentBlockBuilder which is used to change the details of end cut and cap for pillar system. More...
Properties | |
unsafe NXOpen.Features.ShipDesign.PlateStockBuilder | CapPlateStock [get] |
Returns the stock data used to define the stock information of the cap. More... | |
unsafe NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder | CapStock [get] |
Returns the stock data used to define the stock information of the cap. More... | |
unsafe NXOpen.Features.ShipDesign.EndCutBuilder | EndCut [get] |
Returns the plate stock builder, which defines the seam material, grade, and thickness More... | |
unsafe NXOpen.Features.ShipDesign.PillarBuilder.EndTreatmentTypes | TreatmentType [get, set] |
Returns or sets the treatment type: Endcut or Cap More... | |
Properties inherited from NXOpen.Features.FeatureBuilder | |
unsafe bool | ParentFeatureInternal [get, set] |
Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More... | |
Properties inherited from NXOpen.Builder | |
unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
Returns the preview builder subobject. More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Public Member Functions inherited from NXOpen.Features.FeatureBuilder | |
unsafe NXOpen.Features.Feature | CommitFeature () |
Commits the feature parameters and creates the feature More... | |
unsafe NXOpen.Features.Feature | GetFeature () |
Returns the feature currently being edited by this builder. More... | |
unsafe void | HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature) |
Re-suppress an internal parent feature (a slave feature) after it has been edited. More... | |
unsafe void | SetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the parent features which would be internal or slaves to the feature being created or commited More... | |
unsafe void | ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature) |
Unsuppress an internal parent feature (a slave feature) so it can be edited. More... | |
unsafe void | UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the internal parent feature of the feature being edited to external More... | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Used to create a NXOpen.Features.ShipDesign.PillarTreatmentBlockBuilder which is used to change the details of end cut and cap for pillar system.
This class is sub-object of another builder, and cannot be directly instantiated.
Default values.
Property | Value |
---|---|
CapPlateStock.KnuckleRatio |
3.0 |
CapPlateStock.KnuckleSmoothAngle |
3.0 |
CapPlateStock.MaterialOption |
0 |
CapPlateStock.OppositeThickness.Value |
0 (millimeters part), 0 (inches part) |
CapPlateStock.RestrictThicknessToMaterial |
true |
CapPlateStock.ThickenOption |
SingleSided |
CapPlateStock.Thickness.Value |
10 (millimeters part), 0.5 (inches part) |
CapPlateStock.ThicknessSourceOption |
List |
EndCut.ConnectionType |
Connected |
EndCut.DraftAngle.Value |
0 |
EndCut.DraftOffset.Value |
0 (millimeters part), 0 (inches part) |
EndCut.DraftType |
Trim |
EndCut.EndFaceType |
NeatTrim |
EndCut.LimitType |
Value |
EndCut.Offset.Value |
0 (millimeters part), 0 (inches part) |
EndCut.SelectionType |
FacesWithAttributes |
EndCut.ShearAngle.Value |
0 |
EndCut.TiltAngle.Value |
0 |
Created in NX12.0.2
|
get |
Returns the stock data used to define the stock information of the cap.
Created in NX12.0.2
License requirements: None.
|
get |
Returns the stock data used to define the stock information of the cap.
Created in NX12.0.2
License requirements: None.
|
get |
Returns the plate stock builder, which defines the seam material, grade, and thickness
Created in NX12.0.2
License requirements: None.
|
getset |
Returns or sets the treatment type: Endcut or Cap
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")