|
NXOpen .NET Reference Guide
1899
|
|
NXOpen .NET Reference Guide
1899
|
Represents a NXOpen.Features.ShipDesign.PillarSystem builder which is used to create or edit a pillar system feature. More...
Public Types | |
| enum | StockSectionType { Profile, BuiltUp } |
| SpreadSheet Type Profile or BuiltUp More... | |
| enum | Types { ShipStructure, Points } |
| Used to specify how the pillar system is defined. More... | |
Public Member Functions | |
| unsafe NXOpen.Features.ShipDesign.PointPairBuilder | CreatePointPairBuilder () |
| Creates a NXOpen.Features.ShipDesign.PointPairBuilder . More... | |
| unsafe string[] | GetAvailableAnchorPointNames () |
| The list of available anchor points More... | |
| unsafe void | PopulateAnchorPointList () |
| Update anchor points More... | |
 Public Member Functions inherited from NXOpen.Features.ShipDesign.ProfileSystemBuilder | |
| unsafe void | CreatePathCurves (out NXOpen.NXObject[] curves) |
| Creates path curves for all the paths of the profile system. More... | |
| unsafe void | CreatOrientationPathCurve () |
| Creates the orientation path curves. More... | |
| unsafe void | DeleteLastPathCurves () |
| Deletes the path curves returned from a call to GetLastPathCurves . More... | |
| unsafe void | DeletePathCurves () |
| Deletes the path curves created from a call to CreatePathCurves . More... | |
| unsafe void | GetLastPathCurves (out NXOpen.NXObject[] curves) |
| Gets the path curves used by NXOpen.Features.ShipDesign.OrientationDefinitionBuilder . More... | |
| unsafe void | SetBoundaryOnePoints (NXOpen.Point3d[] points) |
| Sets the selected intersection points for the first boundary. More... | |
| unsafe void | SetBoundaryTwoPoints (NXOpen.Point3d[] points) |
| Set the selected intersection points for the second boundary. More... | |
| unsafe void | SetRegionPoints (NXOpen.Point3d[] points) |
| Sets the points that identify which regions of the curves will be used. More... | |
| unsafe void | UpdateEndcutChangeStatus (bool isChangeStart, bool isChangeEnd, bool isAllInBoudary) |
| Updates the endcut change status. More... | |
| Public Member Functions inherited from NXOpen.Features.ShipDesign.FeatureParmsBuilder | |
| unsafe NXOpen.Features.ShipDesign.PlaneListBuilder | CreatePlaneForList () |
| Create a NXOpen.Features.ShipDesign.PlaneListBuilder to add a defined plane to a list. More... | |
| Public Member Functions inherited from NXOpen.Features.FeatureBuilder | |
| unsafe NXOpen.Features.Feature | CommitFeature () |
| Commits the feature parameters and creates the feature More... | |
| unsafe NXOpen.Features.Feature | GetFeature () |
| Returns the feature currently being edited by this builder. More... | |
| unsafe void | HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature) |
| Re-suppress an internal parent feature (a slave feature) after it has been edited. More... | |
| unsafe void | SetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
| Set the parent features which would be internal or slaves to the feature being created or commited More... | |
| unsafe void | ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature) |
| Unsuppress an internal parent feature (a slave feature) so it can be edited. More... | |
| unsafe void | UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
| Set the internal parent feature of the feature being edited to external More... | |
| Public Member Functions inherited from NXOpen.Builder | |
| unsafe NXOpen.NXObject | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| unsafe void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| unsafe NXOpen.NXObject[] | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| unsafe NXOpen.NXObject | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| unsafe void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| unsafe bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Public Member Functions inherited from NXOpen.TaggedObject | |
| void | PrintTestData (String variableName) |
| <exclude> More... | |
| void | PrintTestData (String variableName, int lineNumber) |
| <exclude> More... | |
| override string | ToString () |
| Returns a String that represents the current Object. More... | |
| Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
| Asynchronously processes the given message. More... | |
| IMessage | SyncProcessMessage (IMessage msg) |
| Synchronously processes the given message. More... | |
Properties | |
| unsafe int | AnchorPoint [get, set] |
| Returns or sets the anchor point. More... | |
| unsafe bool | BuildSolid [get, set] |
| Returns or sets the indication of whether to build a solid for the pillar system or just the curve. More... | |
| unsafe NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder | BuiltUpStock [get] |
| Returns the stock used to build the builtUp from. More... | |
| unsafe NXOpen.Direction | Direction [get, set] |
| Returns or sets the direction of the pillar. More... | |
| unsafe NXOpen.Features.ShipDesign.PlateStockBuilder | EndCapPlateStock [get] |
| Returns the plate stock builder, which defines the seam material, grade, and thickness More... | |
| unsafe NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder | EndCapStock [get] |
| Returns the stock data used to define the stock information of the end cap. More... | |
| unsafe NXOpen.Expression | EndCapThickness [get] |
| Returns the end cap thickness. More... | |
| unsafe NXOpen.Features.ShipDesign.EndCutBuilder | EndEndCut [get] |
| Returns the end end cut More... | |
| unsafe NXOpen.Features.ShipDesign.PillarBuilder.EndTreatmentTypes | EndTreatmentType [get, set] |
| Returns or sets the end treatment type: Endcut or Cap More... | |
| unsafe NXOpen.SelectNXObjectList | IntersectingShipStructure [get] |
| Returns the ship structure to intersect with each other that defines the start of a pillar. More... | |
| unsafe NXOpen.SelectNXObjectList | LimitingShipStructure [get] |
| Returns the ship sructure that defines the end of the pillar. More... | |
| unsafe NXOpen.Expression | OrientationAngle [get] |
| Returns the angle at which to orient the stock shape. More... | |
| unsafe NXOpen.SelectTaggedObject | OrientationLine [get] |
| Returns the orientation line, used only if the creation method is "Specify Line". More... | |
| unsafe NXOpen.NXObjectList | PointPairList [get] |
| Returns the list of pairs of points that define the ends of the pillars. More... | |
| unsafe bool | ReverseOrientationDirection [get, set] |
| Returns or sets the reverse orientation direction More... | |
| unsafe bool | ReverseReferenceDirection [get, set] |
| Returns or sets the reverse reference direction More... | |
| unsafe NXOpen.Features.ShipDesign.PillarSystemBuilder.StockSectionType | SectionType [get, set] |
| Returns or sets the section type (profile or plate) More... | |
| unsafe NXOpen.Features.ShipDesign.ShipNamesBuilder | ShipNames [get] |
| Returns the Ship Names builder, used to assign names to the Pillar Systems created. More... | |
| unsafe NXOpen.Features.ShipDesign.PlateStockBuilder | StartCapPlateStock [get] |
| Returns the plate stock builder, which defines the seam material, grade, and thickness More... | |
| unsafe NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder | StartCapStock [get] |
| Returns the stock data used to define the stock information of the start cap. More... | |
| unsafe NXOpen.Expression | StartCapThickness [get] |
| Returns the start cap thickness. More... | |
| unsafe NXOpen.Features.ShipDesign.EndCutBuilder | StartEndCut [get] |
| Returns the start end cut More... | |
| unsafe NXOpen.Features.ShipDesign.PillarBuilder.EndTreatmentTypes | StartTreatmentType [get, set] |
| Returns or sets the start treatment type: Endcut or Cap More... | |
| unsafe NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder | StockData [get] |
| Returns the stock data used to define the stock information of the stiffener. More... | |
| unsafe NXOpen.Features.ShipDesign.PillarSystemBuilder.Types | Type [get, set] |
| Returns or sets the type of input used to define the pillar location. More... | |
| Properties inherited from NXOpen.Features.ShipDesign.ProfileSystemBuilder | |
| unsafe NXOpen.SelectNXObjectList | Boundary1 [get] |
| Returns the collector containing the plate system, profile system, or datum plane that will be used to trim the first end of the generated profile system. More... | |
| unsafe NXOpen.Plane | Boundary1Plane [get, set] |
| Returns or sets the defined plane that will be used to trim the first end of the generated profile system. More... | |
| unsafe NXOpen.SelectNXObjectList | Boundary2 [get] |
| Returns the collector containing the plate system, profile system, or datum plane that will be used to trim the second end of the generated profile system. More... | |
| unsafe NXOpen.Plane | Boundary2Plane [get, set] |
| Returns or sets the defined plane that will be used to trim the second end of the generated profile system. More... | |
| unsafe bool | BoundaryOneModified [get, set] |
| Returns or sets the flag that indicates if the boundary 1 has been modified. More... | |
| unsafe bool | BoundaryReverse [get, set] |
| Returns or sets the indication if the side of a single boundary should be changed to the other side or not. More... | |
| unsafe bool | BoundaryTwoModified [get, set] |
| Returns or sets the flag that indicates if the boundary 2 has been modified. More... | |
| unsafe NXOpen.SelectPointList | FirstIntersectionPoints [get] |
| Returns the selected intersection points between the curves and the first boundary. More... | |
| unsafe bool | ReversePathDirection [get, set] |
| Returns or sets the flag that indicates if the default curve direction should be reversed or not. More... | |
| unsafe NXOpen.SelectPointList | SecondIntersectionPoints [get] |
| Returns the selected intersection points between the curves and the second boundary. More... | |
| unsafe NXOpen.SelectPointList | SplitKnuckleLocations [get] |
| Returns the collector containing the knuckle points that are to be used to create seams. More... | |
| unsafe bool | UseNewDefaultSectionAlgorithm [get, set] |
| Returns or sets the flag that indicates if the new default section algorithm is used. More... | |
| Properties inherited from NXOpen.Features.ShipDesign.FeatureParmsBuilder | |
| unsafe double | AngleTolerance [get, set] |
| Returns or sets the tolerance, in degrees, used to determine when angles are zero. More... | |
| unsafe double | DistanceTolerance [get, set] |
| Returns or sets the tolerance used to determine when distances are considered zero. More... | |
| unsafe NXOpen.Features.ShipDesign.FeatureParmsBuilder.OrientationAngleRuleTypes | OrientationAngleRule [get, set] |
| Returns or sets the angle rule to use when measuring angles. More... | |
| Properties inherited from NXOpen.Features.FeatureBuilder | |
| unsafe bool | ParentFeatureInternal [get, set] |
| Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More... | |
| Properties inherited from NXOpen.Builder | |
| unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
| Returns the preview builder subobject. More... | |
| Properties inherited from NXOpen.TaggedObject | |
| Tag | Tag [get] |
| Returns the tag of this object. More... | |
| Properties inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageSink | NextSink [get] |
| Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
| Protected Member Functions inherited from NXOpen.TaggedObject | |
| new void | initialize () |
| <exclude> More... | |
Represents a NXOpen.Features.ShipDesign.PillarSystem builder which is used to create or edit a pillar system feature.
To create a new instance of this class, use NXOpen.Features.ShipCollection.CreatePillarSystemBuilder
Default values.
| Property | Value |
|---|---|
|
EndCapPlateStock.KnuckleRatio |
3.0 |
|
EndCapPlateStock.KnuckleSmoothAngle |
3.0 |
|
EndCapPlateStock.MaterialOption |
0 |
|
EndCapPlateStock.OppositeThickness.Value |
0 (millimeters part), 0 (inches part) |
|
EndCapPlateStock.RestrictThicknessToMaterial |
true |
|
EndCapPlateStock.ThickenOption |
SingleSided |
|
EndCapPlateStock.Thickness.Value |
10 (millimeters part), 0.5 (inches part) |
|
EndCapPlateStock.ThicknessSourceOption |
List |
|
EndEndCut.ConnectionType |
Connected |
|
EndEndCut.DraftAngle.Value |
0 |
|
EndEndCut.DraftOffset.Value |
0 (millimeters part), 0 (inches part) |
|
EndEndCut.DraftType |
Trim |
|
EndEndCut.EndFaceType |
NeatTrim |
|
EndEndCut.LimitType |
Value |
|
EndEndCut.Offset.Value |
0 (millimeters part), 0 (inches part) |
|
EndEndCut.SelectionType |
FacesWithAttributes |
|
EndEndCut.ShearAngle.Value |
0 |
|
EndEndCut.TiltAngle.Value |
0 |
|
OrientationAngle.Value |
0 |
|
SectionType |
Profile |
Created in NX8.0.0
|
inline |
Creates a NXOpen.Features.ShipDesign.PointPairBuilder .
Created in NX8.0.0
License requirements: nx_ship_basic ("Ship Basic Design")
|
inline |
The list of available anchor points
Created in NX9.0.3
License requirements: None.
|
inline |
Update anchor points
Created in NX9.0.3
License requirements: None.
|
getset |
Returns or sets the anchor point.
Created in NX9.0.3
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
getset |
Returns or sets the indication of whether to build a solid for the pillar system or just the curve.
Created in NX11.0.0
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
get |
Returns the stock used to build the builtUp from.
Created in NX9.0.0
License requirements: None.
|
getset |
Returns or sets the direction of the pillar.
Only used when Type is Features.ShipDesign.PillarSystemBuilder.Types.ShipStructure.
Created in NX8.0.0
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
get |
Returns the plate stock builder, which defines the seam material, grade, and thickness
Created in NX12.0.2
License requirements: None.
|
get |
Returns the stock data used to define the stock information of the end cap.
Created in NX12.0.2
License requirements: None.
|
get |
Returns the end cap thickness.
Created in NX12.0.2
License requirements: None.
|
get |
Returns the end end cut
Created in NX12.0.2
License requirements: None.
|
getset |
Returns or sets the end treatment type: Endcut or Cap
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
get |
Returns the ship structure to intersect with each other that defines the start of a pillar.
Only used when Type is Features.ShipDesign.PillarSystemBuilder.Types.ShipStructure.
Created in NX8.0.0
License requirements: None.
|
get |
Returns the ship sructure that defines the end of the pillar.
Only used when Type is Features.ShipDesign.PillarSystemBuilder.Types.ShipStructure.
Created in NX8.0.0
License requirements: None.
|
get |
Returns the angle at which to orient the stock shape.
Created in NX8.0.0
License requirements: None.
|
get |
Returns the orientation line, used only if the creation method is "Specify Line".
Created in NX8.5.0
License requirements: None.
|
get |
Returns the list of pairs of points that define the ends of the pillars.
Only used when Type is Features.ShipDesign.PillarSystemBuilder.Types.Points.
Created in NX8.0.0
License requirements: None.
|
getset |
Returns or sets the reverse orientation direction
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
getset |
Returns or sets the reverse reference direction
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
getset |
Returns or sets the section type (profile or plate)
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
get |
Returns the Ship Names builder, used to assign names to the Pillar Systems created.
Created in NX9.0.2
License requirements: None.
|
get |
Returns the plate stock builder, which defines the seam material, grade, and thickness
Created in NX12.0.2
License requirements: None.
|
get |
Returns the stock data used to define the stock information of the start cap.
Created in NX12.0.2
License requirements: None.
|
get |
Returns the start cap thickness.
Created in NX12.0.2
License requirements: None.
|
get |
Returns the start end cut
Created in NX12.0.2
License requirements: None.
|
getset |
Returns or sets the start treatment type: Endcut or Cap
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
|
get |
Returns the stock data used to define the stock information of the stiffener.
Created in NX8.0.0
License requirements: None.
|
getset |
Returns or sets the type of input used to define the pillar location.
Created in NX8.0.0
License requirements to get this property: None.
License requirements to set this property: nx_ship_basic ("Ship Basic Design")
