This class is used to create or edit a NXOpen.Features.ShipDesign.Hull feature. More...

Inheritance diagram for NXOpen.Features.ShipDesign.HullBuilder:

Public Types
enum	Types { SheetBody, Faces }
	Indicates the method that is being used to define the mold face of the hull. More...

Public Types inherited from NXOpen.Features.ShipDesign.PlateSystemBuilder
enum	StiffenerDirectionType { FwdPortToInUp, AftStbdFrOutDn, FwdPortToInCtr, AftStbdFrOutCtr }
	Settings used to indicate the default primary and secondary stiffener direction. More...

Public Types inherited from NXOpen.Features.ShipDesign.FeatureParmsBuilder
enum	OrientationAngleRuleTypes { RightHand, ShipOrientation }
	Settings to indicate how angles are to be measured. More...

Properties
unsafe NXOpen.Plane	Centerline `[get, set]`
	Returns or sets the plane representing the center line of the hull. More...

unsafe NXOpen.ScCollector	MoldFaces `[get]`
	Returns the faces selected that defines the overall shape of the hull. More...

unsafe NXOpen.SelectBody	MoldFaceSheet `[get]`
	Returns the sheet body selected that defines the overall shape of the hull. More...

unsafe NXOpen.Features.ShipDesign.HullBuilder.Types	Type `[get, set]`
	Returns or sets the method used to define the mold face of the hull. More...

Properties inherited from NXOpen.Features.ShipDesign.PlateSystemBuilder
unsafe NXOpen.Plane	BoundaryPlane `[get, set]`
	Returns or sets the plane defined to indicate the boundary of the plate system. More...

unsafe NXOpen.Section	BoundarySection `[get]`
	Returns the section containing curves that define the boundary of the plate system. More...

unsafe NXOpen.SelectNXObjectList	BoundarySheets `[get]`
	Returns the sheet bodies or datum planes selected, or a face collector used to define the boundary of the plate system. More...

unsafe NXOpen.Expression	Offset `[get]`
	Returns the offset to apply to the selected mold face to produce the desired mold face. More...

unsafe NXOpen.Features.ShipDesign.PlateSystemBuilder.StiffenerDirectionType	Primary `[get, set]`
	Returns or sets the primary stiffener direction. More...

unsafe NXOpen.Features.ShipDesign.PlateSystemBuilder.StiffenerDirectionType	PrimaryOnReference `[get, set]`
	Returns or sets the primary stiffener direction when the plate system is located on a midship reference. More...

unsafe NXOpen.GeometricUtilities.ProjectionOptions	ProjectionDirection `[get]`
	Returns the direction used to project the boundary section curves onto the mold face. More...

unsafe NXOpen.RegionPointList	Regions `[get]`
	Returns the regions selected from the sheet, that has the inscribed boundaries, to keep for the final plate system shape. More...

unsafe NXOpen.Features.ShipDesign.PlateSystemBuilder.StiffenerDirectionType	Secondary1 `[get, set]`
	Returns or sets the direction of the stiffener flange. More...

unsafe NXOpen.Features.ShipDesign.PlateSystemBuilder.StiffenerDirectionType	Secondary1OnReference `[get, set]`
	Returns or sets the direction of the stiffener flange when the stiffener is located on a midship reference. More...

unsafe NXOpen.Features.ShipDesign.PlateSystemBuilder.StiffenerDirectionType	Secondary2 `[get, set]`
	Returns or sets the direction of the stiffener flange. More...

unsafe NXOpen.Features.ShipDesign.PlateSystemBuilder.StiffenerDirectionType	Secondary2OnReference `[get, set]`
	Returns or sets the direction of the stiffener flange when the stiffener is located on a midship reference. More...

unsafe NXOpen.Features.ShipDesign.ShipNamesBuilder	ShipNames `[get]`
	Returns the Ship Names builder, used to assign names to the Plate Systems created. More...

unsafe NXOpen.SelectNXObjectList	SplitKnuckleEdges `[get]`
	Returns the split knuckle edges, which are used to create seam feature to split a plate system into plate subsystem. More...

unsafe NXOpen.Features.ShipDesign.PlateStockBuilder	Stock `[get]`
	Returns the plate stock builder, used to define the plate material, grade, thickness, mass density, and thicken option. More...

unsafe NXOpen.Features.ShipDesign.ThicknessDirectionBuilder	ThicknessDirection `[get]`
	Returns the thickness direction builder, used to specify the thickness direction from the mold face. More...

unsafe int	Tightness `[get, set]`
	Returns or sets the tightness desired for the plate system. More...

unsafe NXOpen.Weld.CharacteristicsBuilder	Weld `[get]`
	Returns the welding characteristics builder, used to assign welding characteristics to the outermost edges of a plate system. More...

Properties inherited from NXOpen.Features.ShipDesign.FeatureParmsBuilder
unsafe double	AngleTolerance `[get, set]`
	Returns or sets the tolerance, in degrees, used to determine when angles are zero. More...

unsafe double	DistanceTolerance `[get, set]`
	Returns or sets the tolerance used to determine when distances are considered zero. More...

unsafe NXOpen.Features.ShipDesign.FeatureParmsBuilder.OrientationAngleRuleTypes	OrientationAngleRule `[get, set]`
	Returns or sets the angle rule to use when measuring angles. More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.Features.ShipDesign.PlateSystemBuilder
unsafe void	CleanUpTemporaryCurves ()
	Cleans up the temp curves. More...

unsafe NXOpen.Body	CreateRegionBody ()
	Create the region body that has the inscribed boundaries. More...

unsafe void	DeletePreviewBody (bool bDelete)
	Deletes the preview body. More...

unsafe void	DeleteRegionBody ()
	Delete the current region body. More...

unsafe void	SetKnuckleEdges (NXOpen.TaggedObject[] knuckleEdges)
	Sets the knuckle edges, which includes edges for both bend and split types. More...

unsafe void	SetPreviewOption (bool bPreview)
	Sets the preview option. More...

unsafe void	SetRegionIndex (int[] indexArray)
	Sets the region index. More...

unsafe void	SetRegionPoints (NXOpen.Point3d[] regionPoints)
	Set the points derived from the regions of the sheet, that has the inscribed boundaries, to keep for the final plate system shape. More...

unsafe void	SetSplitEdgeUpdateFlag (bool isSplitEdgeUpdate)
	Sets the flag to indicate that split knuckle edges are out of date and need to update. More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

This class is used to create or edit a NXOpen.Features.ShipDesign.Hull feature.

To create a new instance of this class, use NXOpen.Features.ShipCollection.CreateHullBuilder

Default values.

Property

Value

Offset.Value

0 (millimeters part), 0 (inches part)

Primary

FwdPortToInUp

PrimaryOnReference

FwdPortToInUp

Secondary1

FwdPortToInUp

Secondary1OnReference

FwdPortToInUp

Secondary2

FwdPortToInUp

Secondary2OnReference

FwdPortToInUp

Created in NX8.0.0

Member Enumeration Documentation

enum NXOpen.Features.ShipDesign.HullBuilder.Types

Indicates the method that is being used to define the mold face of the hull.

Enumerator
SheetBody	Mold face is being defined by a selected sheet body.
Faces	Mold face is being defined by selected faces.

Property Documentation

unsafe NXOpen.Plane NXOpen.Features.ShipDesign.HullBuilder.Centerline

getset

Returns or sets the plane representing the center line of the hull.

This is optional, if not supplied the center line will considered to be the ship main dimensions Y = 0 plane.

Created in NX11.0.0

License requirements to get this property: None.

License requirements to set this property: nx_ship_basic ("Ship Basic Design")

unsafe NXOpen.ScCollector NXOpen.Features.ShipDesign.HullBuilder.MoldFaces

get

Returns the faces selected that defines the overall shape of the hull.

This is only used if the NXOpen.Features.ShipDesign.HullBuilder.Types.Faces is set.

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.SelectBody NXOpen.Features.ShipDesign.HullBuilder.MoldFaceSheet

get

Returns the sheet body selected that defines the overall shape of the hull.

This is only used if the NXOpen.Features.ShipDesign.HullBuilder.Types.SheetBody is set.

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.Features.ShipDesign.HullBuilder.Types NXOpen.Features.ShipDesign.HullBuilder.Type

getset

Returns or sets the method used to define the mold face of the hull.

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_ship_basic ("Ship Basic Design")

The documentation for this class was generated from the following file:

Features_ShipDesign_HullBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation