NXOpen .NET Reference Guide
1899
|
The Three Bend Corner feature class. More...
Public Types | |
enum | CutMethodTypes { ByTool, ByPath } |
This enum represents cut method More... | |
enum | OriginTypes { BendCenter, CornerPoint } |
This enum represents Origin type More... | |
enum | TreatmentTypeOptions { Open, Closed, CircularCutout, UCutout, VCutout } |
This enum represents the corner treatment type. More... | |
Public Member Functions | |
unsafe void | AddFacePair (NXOpen.Face firstFace, NXOpen.Face secondFace) |
Input a bend face pair for the three bend corner feature. More... | |
unsafe void | GetFacePair (int index, out NXOpen.Face firstFace, out NXOpen.Face secondFace) |
Gets the bend face pair at the given index. More... | |
unsafe void | RemoveFacePair (NXOpen.Face firstFace, NXOpen.Face secondFace) |
Removes a face pair (that represents a unique corner) from the list of face pairs already added. More... | |
unsafe void | SetDiameter (string diameter) |
The diameter used for the circular cutout corner treatment. More... | |
unsafe int | ValidateBuilderData () |
Verify that the builder data is valid for creation of a three bend corner. More... | |
Public Member Functions inherited from NXOpen.Features.FeatureBuilder | |
unsafe NXOpen.Features.Feature | CommitFeature () |
Commits the feature parameters and creates the feature More... | |
unsafe NXOpen.Features.Feature | GetFeature () |
Returns the feature currently being edited by this builder. More... | |
unsafe void | HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature) |
Re-suppress an internal parent feature (a slave feature) after it has been edited. More... | |
unsafe void | SetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the parent features which would be internal or slaves to the feature being created or commited More... | |
unsafe void | ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature) |
Unsuppress an internal parent feature (a slave feature) so it can be edited. More... | |
unsafe void | UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the internal parent feature of the feature being edited to external More... | |
Public Member Functions inherited from NXOpen.Builder | |
unsafe NXOpen.NXObject | Commit () |
Commits any edits that have been applied to the builder. More... | |
unsafe void | Destroy () |
Deletes the builder, and cleans up any objects created by the builder. More... | |
unsafe NXOpen.NXObject[] | GetCommittedObjects () |
For builders that create more than one object, this method returns the objects that are created by commit. More... | |
unsafe NXOpen.NXObject | GetObject () |
Returns the object currently being edited by this builder. More... | |
unsafe void | ShowResults () |
Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
unsafe bool | Validate () |
Validate whether the inputs to the component are sufficient for commit to be called. More... | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
Asynchronously processes the given message. More... | |
IMessage | SyncProcessMessage (IMessage msg) |
Synchronously processes the given message. More... | |
Properties | |
unsafe bool | BlendMiter [get, set] |
Returns or sets the option for smooth transition from miter to cutout edges. More... | |
unsafe NXOpen.Expression | BlendMiterRadius [get] |
Returns the blend miter radius used for three bend corner miter treatment. More... | |
unsafe NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.CutMethodTypes | CutMethod [get, set] |
Returns or sets the cut method to be used for U/V cutout relief. More... | |
unsafe NXOpen.Expression | Diameter [get] |
Returns the diameter used for circular, u and v cutout corner treatments. More... | |
unsafe NXOpen.Expression | FlangeClearance [get] |
Returns the flange clearance used for three bend corner miter treatment. More... | |
unsafe NXOpen.Expression | Length [get] |
Returns the length of U relief. More... | |
unsafe NXOpen.Expression | Length1 [get] |
Returns the length of V relief associated with the first bend selected. More... | |
unsafe NXOpen.Expression | Length2 [get] |
Returns the length of V relief associated with the second bend selected. More... | |
unsafe bool | MiterCorner [get, set] |
Returns or sets whether the corner will be closed using miter. More... | |
unsafe NXOpen.Expression | MiterRootRadius [get] |
Returns the miter root radius used for three bend corner miter treatment. More... | |
unsafe int | NumberOfFacePairs [get] |
Returns the number of face pairs already identified for the three bend corner feature. More... | |
unsafe NXOpen.Expression | Offset [get] |
Returns the offset used for circular, u and v cutout corner treatments. More... | |
unsafe NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.OriginTypes | OriginType [get, set] |
Returns or sets the relief origin used for circular, u and v cutout corner treatments. More... | |
unsafe NXOpen.Expression | PunchRadius [get] |
Returns the punch radius of tool associated with V relief. More... | |
unsafe NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions | TreatmentType [get, set] |
Returns or sets the corner treatment type. More... | |
unsafe NXOpen.Expression | VCutoutAngle1 [get] |
Returns the angle 1 used for the v cutout treatment. More... | |
unsafe NXOpen.Expression | VCutoutAngle2 [get] |
Returns the angle 2 used for the v cutout treatment. More... | |
Properties inherited from NXOpen.Features.FeatureBuilder | |
unsafe bool | ParentFeatureInternal [get, set] |
Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More... | |
Properties inherited from NXOpen.Builder | |
unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
Returns the preview builder subobject. More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
The Three Bend Corner feature class.
Users can identify multiple input face pairs for each three bend corner feature. Each pair is made up of one face each from adjacent bends. The bends must both have the same radius and sweep angle, and they must also be connected via another adjoining bend.
To create a new instance of this class, use NXOpen.Features.SheetMetal.SheetmetalManager.CreateThreeBendCornerFeatureBuilder
Created in NX4.0.0
|
inline |
Input a bend face pair for the three bend corner feature.
This method can be called multiple times for a feature, with each bend face pair representing a unique corner.
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
firstFace | A bend face from a bend |
secondFace | A bend face from an adjacent bend |
|
inline |
Gets the bend face pair at the given index.
The index can vary between zero and one less than the value returned by NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.NumberOfFacePairs .
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
index | Index of the desired face pair |
firstFace | First face of the face pair |
secondFace | Second face of the face pair |
|
inline |
Removes a face pair (that represents a unique corner) from the list of face pairs already added.
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
firstFace | A face from an already selected face pair |
secondFace | The other face from the face pair |
|
inline |
The diameter used for the circular cutout corner treatment.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.CircularCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.UCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout . .
Created in NX4.0.0
Deprecated in NX10.0.0. Use NXOpen.Expression.RightHandSide on the NXOpen.Expression object returned from NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.Diameter instead.
License requirements: nx_sheet_metal ("NX Sheet Metal")
diameter | The diameter for the circular cutout corner treatment |
|
inline |
Verify that the builder data is valid for creation of a three bend corner.
If the data in the builder is valid, the return value is 0
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
getset |
Returns or sets the option for smooth transition from miter to cutout edges.
Created in NX9.0.0
License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the blend miter radius used for three bend corner miter treatment.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.Closed or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.CircularCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.UCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX9.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
getset |
Returns or sets the cut method to be used for U/V cutout relief.
Created in NX1872.0.0
License requirements to get this property: None.
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the diameter used for circular, u and v cutout corner treatments.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.CircularCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.UCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the flange clearance used for three bend corner miter treatment.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.Open or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.Closed or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.CircularCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.UCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX9.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the length of U relief.
Created in NX1872.0.0
License requirements: None.
|
get |
Returns the length of V relief associated with the first bend selected.
Created in NX1872.0.0
License requirements: None.
|
get |
Returns the length of V relief associated with the second bend selected.
Created in NX1872.0.0
License requirements: None.
|
getset |
Returns or sets whether the corner will be closed using miter.
Created in NX9.0.0
License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the miter root radius used for three bend corner miter treatment.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.Closed .
Created in NX9.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the number of face pairs already identified for the three bend corner feature.
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the offset used for circular, u and v cutout corner treatments.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.CircularCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.UCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX9.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
getset |
Returns or sets the relief origin used for circular, u and v cutout corner treatments.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.CircularCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.UCutout or NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX9.0.0
License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the punch radius of tool associated with V relief.
Created in NX1872.0.0
License requirements: None.
|
getset |
Returns or sets the corner treatment type.
The NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentType ) specifies how the corner should be treated. Valid options are in NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions .
Created in NX4.0.0
License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the angle 1 used for the v cutout treatment.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX8.5.0
License requirements: nx_sheet_metal ("NX Sheet Metal")
|
get |
Returns the angle 2 used for the v cutout treatment.
This only applies when the treatment type is set to NXOpen.Features.SheetMetal.ThreeBendCornerBuilder.TreatmentTypeOptions.VCutout .
Created in NX8.5.0
License requirements: nx_sheet_metal ("NX Sheet Metal")