Represents a NXOpen.Features.HemFlange builder More...

Inheritance diagram for NXOpen.Features.SheetMetal.HemFlangeBuilder:

Public Types
enum	BendReliefOptions { Square, Round, None }
	This enum represents the Bend relief type of the hem flange. More...

enum	InsetTypeOptions { MaterialInside, MaterialOutside, BendOutside }
	This enum represents the inset type for the material of the hem flange. More...

enum	TypeOptions { ClosedHemType, OpenHemType, SFlangeHemType, CurlHemType, OpenLoopHemType, ClosedLoopHemType, CenteredLoopHemType }
	Represents the Hem Flange type. More...

Properties
unsafe NXOpen.Expression	BendReliefDepth `[get]`
	Returns the bend relief depth More...

unsafe NXOpen.Features.SheetMetal.HemFlangeBuilder.BendReliefOptions	BendReliefType `[get, set]`
	Returns or sets the bend relief type More...

unsafe NXOpen.Expression	BendReliefWidth `[get]`
	Returns the bend relief width More...

unsafe NXOpen.ScCollector	EdgeChain `[get]`
	Returns the edge chain More...

unsafe NXOpen.Expression	FirstBendRadius `[get]`
	Returns the first bend radius More...

unsafe NXOpen.Expression	FirstFlangeLength `[get]`
	Returns the first flange length More...

unsafe NXOpen.Features.SheetMetal.HemFlangeBuilder.InsetTypeOptions	InsetType `[get, set]`
	Returns or sets the inset type options More...

unsafe NXOpen.Expression	MiterAngle `[get]`
	Returns the miter angle More...

unsafe NXOpen.Expression	NeutralFactor `[get]`
	Returns the neutral factor More...

unsafe NXOpen.Expression	SecondBendRadius `[get]`
	Returns the second bend radius More...

unsafe NXOpen.Expression	SecondFlangeLength `[get]`
	Returns the second flange length More...

unsafe NXOpen.Expression	SweepAngle `[get]`
	Returns the sweep More...

unsafe NXOpen.Features.SheetMetal.HemFlangeBuilder.TypeOptions	Type `[get, set]`
	Returns or sets the hem type More...

unsafe bool	UseMiter `[get, set]`
	Returns or sets the use miter hem More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a NXOpen.Features.HemFlange builder

To create a new instance of this class, use NXOpen.Features.SheetMetal.SheetmetalManager.CreateHemFlangeFeatureBuilder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.Features.SheetMetal.HemFlangeBuilder.BendReliefOptions

This enum represents the Bend relief type of the hem flange.

Enumerator
Square
Round
None

enum NXOpen.Features.SheetMetal.HemFlangeBuilder.InsetTypeOptions

This enum represents the inset type for the material of the hem flange.

Enumerator
MaterialInside	The hem flange is flush with the thickness face on the inside
MaterialOutside	The hem flange is flush with the thickness face on the outside
BendOutside	The bend and hem flange are outside the thickness face

enum NXOpen.Features.SheetMetal.HemFlangeBuilder.TypeOptions

Represents the Hem Flange type.

Enumerator
ClosedHemType
OpenHemType
SFlangeHemType
CurlHemType
OpenLoopHemType
ClosedLoopHemType
CenteredLoopHemType

Property Documentation

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.BendReliefDepth

get

Returns the bend relief depth

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Features.SheetMetal.HemFlangeBuilder.BendReliefOptions NXOpen.Features.SheetMetal.HemFlangeBuilder.BendReliefType

getset

Returns or sets the bend relief type

Created in NX5.0.0

License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")

License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.BendReliefWidth

get

Returns the bend relief width

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.ScCollector NXOpen.Features.SheetMetal.HemFlangeBuilder.EdgeChain

get

Returns the edge chain

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.FirstBendRadius

get

Returns the first bend radius

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.FirstFlangeLength

get

Returns the first flange length

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Features.SheetMetal.HemFlangeBuilder.InsetTypeOptions NXOpen.Features.SheetMetal.HemFlangeBuilder.InsetType

getset

Returns or sets the inset type options

Created in NX5.0.0

License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")

License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.MiterAngle

get

Returns the miter angle

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.NeutralFactor

get

Returns the neutral factor

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.SecondBendRadius

get

Returns the second bend radius

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.SecondFlangeLength

get

Returns the second flange length

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Expression NXOpen.Features.SheetMetal.HemFlangeBuilder.SweepAngle

get

Returns the sweep

Created in NX5.0.0

License requirements: nx_sheet_metal ("NX Sheet Metal")

unsafe NXOpen.Features.SheetMetal.HemFlangeBuilder.TypeOptions NXOpen.Features.SheetMetal.HemFlangeBuilder.Type

getset

Returns or sets the hem type

Created in NX5.0.0

License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")

License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")

unsafe bool NXOpen.Features.SheetMetal.HemFlangeBuilder.UseMiter

getset

Returns or sets the use miter hem

Created in NX5.0.0

License requirements to get this property: nx_sheet_metal ("NX Sheet Metal")

License requirements to set this property: nx_sheet_metal ("NX Sheet Metal")

The documentation for this class was generated from the following file:

Features_SheetMetal_HemFlangeBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation