|
NXOpen .NET Reference Guide
1899
|
|
NXOpen .NET Reference Guide
1899
|
Represents a Features.Offset3DCurveBuilder builder which implements offset curves along a direction with offset distance in three dimension. More...
Public Member Functions | |
| unsafe void | FlipOffsetCurveDirection (NXOpen.ICurve inputCurve, NXOpen.Point3d point, bool reverseDirection) |
| Routine to store the output curves and the flip logical in the builder More... | |
 Public Member Functions inherited from NXOpen.Features.FeatureBuilder | |
| unsafe NXOpen.Features.Feature | CommitFeature () |
| Commits the feature parameters and creates the feature More... | |
| unsafe NXOpen.Features.Feature | GetFeature () |
| Returns the feature currently being edited by this builder. More... | |
| unsafe void | HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature) |
| Re-suppress an internal parent feature (a slave feature) after it has been edited. More... | |
| unsafe void | SetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
| Set the parent features which would be internal or slaves to the feature being created or commited More... | |
| unsafe void | ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature) |
| Unsuppress an internal parent feature (a slave feature) so it can be edited. More... | |
| unsafe void | UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
| Set the internal parent feature of the feature being edited to external More... | |
| Public Member Functions inherited from NXOpen.Builder | |
| unsafe NXOpen.NXObject | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| unsafe void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| unsafe NXOpen.NXObject[] | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| unsafe NXOpen.NXObject | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| unsafe void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| unsafe bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Public Member Functions inherited from NXOpen.TaggedObject | |
| void | PrintTestData (String variableName) |
| <exclude> More... | |
| void | PrintTestData (String variableName, int lineNumber) |
| <exclude> More... | |
| override string | ToString () |
| Returns a String that represents the current Object. More... | |
| Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
| Asynchronously processes the given message. More... | |
| IMessage | SyncProcessMessage (IMessage msg) |
| Synchronously processes the given message. More... | |
Properties | |
| unsafe bool | Associative [get, set] |
| Returns or sets the flag for creating associative or non-associative feature. More... | |
| unsafe NXOpen.GeometricUtilities.CurveFitData | CurveFitData [get] |
| Returns the curve fit settings More... | |
| unsafe NXOpen.Section | OffsetCurves [get, set] |
| Returns or sets the curves to offset. More... | |
| unsafe NXOpen.Expression | OffsetDistance [get] |
| Returns the distance by which to offset the curves. More... | |
| unsafe NXOpen.Direction | OffsetViewDirection [get, set] |
| Returns or sets the reference direction from which to get the offset direction. More... | |
| unsafe bool | ReverseSide [get, set] |
| Returns or sets the flag of reverse all offset direction. More... | |
| Properties inherited from NXOpen.Features.FeatureBuilder | |
| unsafe bool | ParentFeatureInternal [get, set] |
| Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More... | |
| Properties inherited from NXOpen.Builder | |
| unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
| Returns the preview builder subobject. More... | |
| Properties inherited from NXOpen.TaggedObject | |
| Tag | Tag [get] |
| Returns the tag of this object. More... | |
| Properties inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageSink | NextSink [get] |
| Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
| Protected Member Functions inherited from NXOpen.TaggedObject | |
| new void | initialize () |
| <exclude> More... | |
Represents a Features.Offset3DCurveBuilder builder which implements offset curves along a direction with offset distance in three dimension.
To create a new instance of this class, use NXOpen.Features.CurveFeatureCollection.CreateOffset3dCurveBuilder
Default values.
| Property | Value |
|---|---|
|
Associative |
true |
|
CurveFitData.CurveJoinMethod |
No |
|
CurveFitData.Degree |
7 |
|
CurveFitData.FitMethod |
DegreeAndSegments |
|
CurveFitData.IsAdvancedFit |
0 |
|
CurveFitData.IsAlignShape |
0 |
|
CurveFitData.MaximumDegree |
7 |
|
CurveFitData.MaximumSegments |
1 |
|
CurveFitData.MinimumDegree |
5 |
|
CurveFitData.Segments |
1 |
|
OffsetDistance.Value |
10 (millimeters part), 0.5 (inches part) |
Created in NX10.0.0
|
inline |
Routine to store the output curves and the flip logical in the builder
Created in NX10.0.0
License requirements: solid_modeling ("SOLIDS MODELING")
| inputCurve | |
| point | |
| reverseDirection |
|
getset |
Returns or sets the flag for creating associative or non-associative feature.
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the curve fit settings
Created in NX10.0.0
License requirements: None.
|
getset |
Returns or sets the curves to offset.
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the distance by which to offset the curves.
Created in NX10.0.0
License requirements: None.
|
getset |
Returns or sets the reference direction from which to get the offset direction.
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the flag of reverse all offset direction.
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
