NXOpen .NET Reference Guide
1899
|
Represents a NXOpen.Features.HolePackage builder. More...
Public Types | |
enum | CounterBoreDepthLimitOptions { Value, UntilSelected, DistanceFromSelected } |
Represents counter bore depth limit options. More... | |
enum | HoleDepthLimitOptions { Value, UntilSelected, UntilNext, ThroughBody } |
Represents hole depth limit options. More... | |
enum | HoleDepthOptions { ToCylinderBottom, ToConeTip } |
Represents hole depth specification options. More... | |
enum | HoleForms { Simple, Counterbored, Countersink, Tapered } |
Represents hole form options. More... | |
enum | ThreadLengthOptions { Diameterx1, Diameterx15, Diameterx20, Diameterx25, Diameterx30, Standard, Custom, Full } |
Represents thread length options. More... | |
enum | ThreadRotationOptions { Right, Left } |
Represents thread rotation options. More... | |
enum | Types { GeneralHole, DrillSizeHole, ScrewClearanceHole, ThreadedHole, HoleSeries } |
Represents hole types. More... | |
Properties | |
unsafe NXOpen.GeometricUtilities.BooleanOperation | BooleanOperation [get] |
Returns the boolean operation More... | |
unsafe NXOpen.Features.HolePackageBuilder.CounterBoreDepthLimitOptions | CounterboreDepthLimitOption [get, set] |
Returns or sets the counter bore depth limit - this is applicable for general and screw clearance hole More... | |
unsafe NXOpen.SelectDisplayableObject | CounterboreDistanceFromSelectedTarget [get] |
Returns the counterbore distance from selected target - this is applicable for general hole, screw clearance hole type More... | |
unsafe NXOpen.SelectDisplayableObject | CounterboreUntilSelectedTarget [get] |
Returns the counterbore until selected target - this is applicable for general hole, screw clearance hole type More... | |
unsafe NXOpen.Features.HolePackageBuilder.HoleDepthOptions | DepthOption [get, set] |
Returns or sets the hole depth option More... | |
unsafe string | DrillSize [get, set] |
Returns or sets the drill size - this is applicable for drill size hole More... | |
unsafe NXOpen.Expression | DrillSizeEndChamferAngle [get] |
Returns the drill size end chamfer angle - this is applicable for drill size hole type More... | |
unsafe bool | DrillSizeEndChamferEnabled [get, set] |
Returns or sets the drill size end chamfer enabled - this is applicable for drill size hole type More... | |
unsafe NXOpen.Expression | DrillSizeEndChamferOffset [get] |
Returns the drill size end chamfer offset - this is applicable for drill size hole type More... | |
unsafe string | DrillSizeFitOption [get, set] |
Returns or sets the drill size screw fit Option - this is applicable for drill size hole More... | |
unsafe NXOpen.Expression | DrillSizeHoleDepth [get] |
Returns the hole depth - this is applicable for drill size hole More... | |
unsafe NXOpen.Expression | DrillSizeHoleDiameter [get] |
Returns the hole diameter - this is applicable for drill size hole More... | |
unsafe string | DrillSizeStandard [get, set] |
Returns or sets the drill size standard - this is applicable for drill size hole type More... | |
unsafe NXOpen.Expression | DrillSizeStartChamferAngle [get] |
Returns the drill size start chamfer angle - this is applicable for drill size hole type More... | |
unsafe bool | DrillSizeStartChamferEnabled [get, set] |
Returns or sets the drill size start chamfer enabled - this is applicable for drill size hole type More... | |
unsafe NXOpen.Expression | DrillSizeStartChamferOffset [get] |
Returns the drill size start chamfer offset - this is applicable for drill size hole type More... | |
unsafe NXOpen.Expression | DrillSizeTipAngle [get] |
Returns the tip angle - this is applicable for drill size hole More... | |
unsafe NXOpen.GeometricUtilities.EndHoleData | EndHoleData [get] |
Returns the target body More... | |
unsafe NXOpen.Expression | GeneralCounterboreDepth [get] |
Returns the counter bore depth - this is applicable for general hole More... | |
unsafe NXOpen.Expression | GeneralCounterboreDiameter [get] |
Returns the counter bore diameter - this is applicable for general hole More... | |
unsafe NXOpen.Expression | GeneralCounterboreHoleDepth [get] |
Returns the counterbore hole depth - this is applicable for general hole counterbore form More... | |
unsafe NXOpen.Expression | GeneralCounterboreHoleDiameter [get] |
Returns the counterbore hole diameter - this is applicable for general hole counterbore form More... | |
unsafe NXOpen.Expression | GeneralCountersinkAngle [get] |
Returns the counter sink angle - this is applicable for general hole More... | |
unsafe NXOpen.Expression | GeneralCountersinkDiameter [get] |
Returns the counter sink diameter - this is applicable for general hole More... | |
unsafe NXOpen.Expression | GeneralCountersinkHoleDepth [get] |
Returns the countersink hole depth - this is applicable for general hole countersink form More... | |
unsafe NXOpen.Expression | GeneralCountersinkHoleDiameter [get] |
Returns the countersink hole diameter - this is applicable for general hole countersink form More... | |
unsafe NXOpen.Expression | GeneralDistanceFromSelected [get] |
Returns the distance from selected value - this is applicable for counterbore form of general hole More... | |
unsafe NXOpen.Features.HolePackageBuilder.HoleForms | GeneralHoleForm [get, set] |
Returns or sets the hole form - this is applicable for general hole More... | |
unsafe NXOpen.Expression | GeneralSimpleHoleDepth [get] |
Returns the simple hole depth - this is applicable for general hole simple form More... | |
unsafe NXOpen.Expression | GeneralSimpleHoleDiameter [get] |
Returns the simple hole diameter - this is applicable for general hole simple form More... | |
unsafe NXOpen.Expression | GeneralTaperAngle [get] |
Returns the taper angle - this is applicable for general hole More... | |
unsafe NXOpen.Expression | GeneralTaperedHoleDepth [get] |
Returns the tapered hole depth - this is applicable for general hole tapered form More... | |
unsafe NXOpen.Expression | GeneralTaperedHoleDiameter [get] |
Returns the tapered hole diameter - this is applicable for general hole tapered form More... | |
unsafe NXOpen.Expression | GeneralTipAngle [get] |
Returns the tip angle - this is applicable for general hole More... | |
unsafe NXOpen.Features.HolePackageBuilder.HoleDepthLimitOptions | HoleDepthLimitOption [get, set] |
Returns or sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type More... | |
unsafe NXOpen.Section | HolePosition [get] |
Returns the hole position More... | |
unsafe NXOpen.GeometricUtilities.MiddleHoleData | MiddleHoleData [get] |
Returns the target body More... | |
unsafe bool | NeckChamferEnabled [get, set] |
Returns or sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form More... | |
unsafe NXOpen.Expression | PitchMultiplier [get] |
Returns the pitch multiplier More... | |
unsafe NXOpen.GeometricUtilities.ProjectionOptions | ProjectionDirection [get] |
Returns the hole direction options More... | |
unsafe bool | ProjectPointOntoTargetEnabled [get, set] |
Returns or sets the project point on target enabled - this is applicable for projecting input point on target body More... | |
unsafe string | RadialEngageOption [get, set] |
Returns or sets the radial engage option - this is applicable for screw clearence hole More... | |
unsafe bool | RelateHoleDepthToThreadDepth [get, set] |
Returns or sets the relate hole depth to thread depth toggle More... | |
unsafe bool | ReliefChamferEnabled [get, set] |
Returns or sets the threaded relief chamfer enabled - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ScrewClearanceCounterboreDepth [get] |
Returns the counter bore depth - this is applicable for screw clearence hole More... | |
unsafe NXOpen.Expression | ScrewClearanceCounterboreDiameter [get] |
Returns the counter bore diameter - this is applicable for screw clearence hole More... | |
unsafe NXOpen.Expression | ScrewClearanceCountersinkAngle [get] |
Returns the counter sink angle - this is applicable for screw clearence hole More... | |
unsafe NXOpen.Expression | ScrewClearanceCountersinkDiameter [get] |
Returns the counter sink diameter - this is applicable for screw clearence hole More... | |
unsafe NXOpen.Expression | ScrewClearanceDistanceFromSelected [get] |
Returns the distance from selected value - this is applicable for counterbore form of screw clearance hole More... | |
unsafe NXOpen.Expression | ScrewClearanceEndChamferAngle [get] |
Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type More... | |
unsafe bool | ScrewClearanceEndChamferEnabled [get, set] |
Returns or sets the end chamfer enabled - this is applicable for screw clearance hole type More... | |
unsafe NXOpen.Expression | ScrewClearanceEndChamferOffset [get] |
Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type More... | |
unsafe NXOpen.Expression | ScrewClearanceHoleDepth [get] |
Returns the hole depth - this is applicable for screw clearance hole More... | |
unsafe NXOpen.Expression | ScrewClearanceHoleDiameter [get] |
Returns the hole diameter - this is applicable for screw clearence hole More... | |
unsafe NXOpen.Features.HolePackageBuilder.HoleForms | ScrewClearanceHoleForm [get, set] |
Returns or sets the hole form - this is applicable for screw clearance hole More... | |
unsafe NXOpen.Expression | ScrewClearanceNeckChamferAngle [get] |
Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form More... | |
unsafe NXOpen.Expression | ScrewClearanceNeckChamferOffset [get] |
Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form More... | |
unsafe NXOpen.Expression | ScrewClearanceReliefDepth [get] |
Returns the relief depth - this is applicable for screw clearence hole type More... | |
unsafe bool | ScrewClearanceReliefEnabled [get, set] |
Returns or sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type More... | |
unsafe NXOpen.Expression | ScrewClearanceStartChamferAngle [get] |
Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type More... | |
unsafe bool | ScrewClearanceStartChamferEnabled [get, set] |
Returns or sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type More... | |
unsafe NXOpen.Expression | ScrewClearanceStartChamferOffset [get] |
Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type More... | |
unsafe NXOpen.Expression | ScrewClearanceTipAngle [get] |
Returns the tip angle - this is applicable for screw clearance hole More... | |
unsafe string | ScrewFitOption [get, set] |
Returns or sets the screw fit Option - this is applicable for screw clearence hole More... | |
unsafe string | ScrewSize [get, set] |
Returns or sets the screw size - this is applicable for screw clearence hole More... | |
unsafe string | ScrewStandard [get, set] |
Returns or sets the screw standard - this is applicable for screw clearence hole type More... | |
unsafe string | ScrewType [get, set] |
Returns or sets the screw type - this is applicable for screw clearence hole More... | |
unsafe bool | StartExtensionEnabled [get, set] |
Returns or sets the extend start enabled - this is applicable for start extension to all hole types More... | |
unsafe NXOpen.GeometricUtilities.StartHoleData | StartHoleData [get] |
Returns the start target body More... | |
unsafe NXOpen.Expression | TapDrillDiameter [get] |
Returns the tap drill diameter - this is applicable for threaded hole More... | |
unsafe bool | ThreadAtBothEnds [get, set] |
Returns or sets the thread at both ends option - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadDepth [get] |
Returns the thread depth - this is applicable for threaded hole More... | |
unsafe NXOpen.Expression | ThreadedEndChamferAngle [get] |
Returns the threaded end chamfer angle - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedEndChamferDiameter [get] |
Returns the threaded end chamfer offset - this is applicable for threaded hole type More... | |
unsafe bool | ThreadedEndChamferEnabled [get, set] |
Returns or sets the threaded end chamfer enabled - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedHoleDepth [get] |
Returns the hole depth - this is applicable for threaded hole More... | |
unsafe NXOpen.Expression | ThreadedReliefAngle [get] |
Returns the relief angle - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedReliefChamferAngle [get] |
Returns the threaded relief chamfer angle - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedReliefChamferOffset [get] |
Returns the threaded relief chamfer offset - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedReliefDepth [get] |
Returns the threaded relief depth - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedReliefDiameter [get] |
Returns the relief diameter - this is applicable for threaded hole type More... | |
unsafe bool | ThreadedReliefEnabled [get, set] |
Returns or sets the threaded relief enabled - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedStartChamferAngle [get] |
Returns the threaded start chamfer angle - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedStartChamferDiameter [get] |
Returns the threaded start chamfer offset - this is applicable for threaded hole type More... | |
unsafe bool | ThreadedStartChamferEnabled [get, set] |
Returns or sets the threaded start chamfer enabled - this is applicable for threaded hole type More... | |
unsafe NXOpen.Expression | ThreadedTipAngle [get] |
Returns the tip angle - this is applicable for threaded hole More... | |
unsafe NXOpen.Features.HolePackageBuilder.ThreadLengthOptions | ThreadLengthOption [get, set] |
Returns or sets the thread length option - this is applicable for threaded hole More... | |
unsafe NXOpen.Features.HolePackageBuilder.ThreadRotationOptions | ThreadRotation [get, set] |
Returns or sets the thread rotation - this is applicable for threaded hole More... | |
unsafe string | ThreadSize [get, set] |
Returns or sets the thread size - this is applicable for threaded hole More... | |
unsafe string | ThreadStandard [get, set] |
Returns or sets the thread standard - this is applicable for threaded hole type More... | |
unsafe double | Tolerance [get, set] |
Returns or sets the distance tolerance More... | |
unsafe NXOpen.Features.HolePackageBuilder.Types | Type [get, set] |
Returns or sets the type More... | |
unsafe NXOpen.SelectDisplayableObject | UntilSelectedTarget [get] |
Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type More... | |
Properties inherited from NXOpen.Features.FeatureBuilder | |
unsafe bool | ParentFeatureInternal [get, set] |
Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More... | |
Properties inherited from NXOpen.Builder | |
unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
Returns the preview builder subobject. More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Public Member Functions inherited from NXOpen.Features.FeatureBuilder | |
unsafe NXOpen.Features.Feature | CommitFeature () |
Commits the feature parameters and creates the feature More... | |
unsafe NXOpen.Features.Feature | GetFeature () |
Returns the feature currently being edited by this builder. More... | |
unsafe void | HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature) |
Re-suppress an internal parent feature (a slave feature) after it has been edited. More... | |
unsafe void | SetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the parent features which would be internal or slaves to the feature being created or commited More... | |
unsafe void | ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature) |
Unsuppress an internal parent feature (a slave feature) so it can be edited. More... | |
unsafe void | UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the internal parent feature of the feature being edited to external More... | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Represents a NXOpen.Features.HolePackage builder.
Inputs to this class can be convergent objects.
To create a new instance of this class, use NXOpen.Features.FeatureCollection.CreateHolePackageBuilder
Default values.
Property | Value |
---|---|
BooleanOperation.Type |
Subtract |
DepthOption |
ToCylinderBottom |
DrillSizeEndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
DrillSizeEndChamferEnabled |
true |
DrillSizeEndChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
DrillSizeHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
DrillSizeHoleDiameter.Value |
11.0 (millimeters part), 0.4 (inches part) |
DrillSizeStartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
DrillSizeStartChamferEnabled |
true |
DrillSizeStartChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
DrillSizeTipAngle.Value |
118 |
EndHoleData.BooleanOperation.Type |
Subtract |
EndHoleData.DepthOption |
ToCylinderBottom |
EndHoleData.HoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
EndHoleData.HoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
EndHoleData.MatchDimOfStartHole |
true |
EndHoleData.ScrewClearanceEndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ScrewClearanceEndChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
EndHoleData.ScrewClearanceStartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ScrewClearanceStartChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
EndHoleData.TapDrillDiameter.Value |
8.5 (millimeters part), 0.34 (inches part) |
EndHoleData.ThreadDepth.Value |
25.0 (millimeters part), 1.0 (inches part) |
EndHoleData.ThreadLengthOption |
Custom |
EndHoleData.ThreadedEndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ThreadedEndChamferDiameter.Value |
10.0 (millimeters part), 0.4 (inches part) |
EndHoleData.ThreadedReliefAngle.Value |
118.0 (millimeters part), 118.0 (inches part) |
EndHoleData.ThreadedReliefChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ThreadedReliefChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
EndHoleData.ThreadedReliefDepth.Value |
5.0 (millimeters part), 0.2 (inches part) |
EndHoleData.ThreadedReliefDiameter.Value |
10.0 (millimeters part), 0.4 (inches part) |
EndHoleData.ThreadedStartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
EndHoleData.ThreadedStartChamferDiameter.Value |
10.0 (millimeters part), 0.4 (inches part) |
EndHoleData.TipAngle.Value |
118 |
GeneralCounterboreDepth.Value |
25.0 (millimeters part), 1.0 (inches part) |
GeneralCounterboreDiameter.Value |
38.0 (millimeters part), 1.5 (inches part) |
GeneralCounterboreHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
GeneralCounterboreHoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
GeneralCountersinkAngle.Value |
90 (millimeters part), 82 (inches part) |
GeneralCountersinkDiameter.Value |
50.0 (millimeters part), 2.0 (inches part) |
GeneralCountersinkHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
GeneralCountersinkHoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
GeneralDistanceFromSelected.Value |
5.0 (millimeters part), 0.2 (inches part) |
GeneralHoleForm |
Simple |
GeneralSimpleHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
GeneralSimpleHoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
GeneralTaperAngle.Value |
10 |
GeneralTaperedHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
GeneralTaperedHoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
GeneralTipAngle.Value |
118 (millimeters part), 118 (inches part) |
MiddleHoleData.BooleanOperation.Type |
Subtract |
MiddleHoleData.EndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
MiddleHoleData.EndChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
MiddleHoleData.HoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
MiddleHoleData.MatchDimOfStartHole |
true |
MiddleHoleData.StartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
MiddleHoleData.StartChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceCounterboreDepth.Value |
10.8 (millimeters part), 0.43 (inches part) |
ScrewClearanceCounterboreDiameter.Value |
18.0 (millimeters part), 0.72 (inches part) |
ScrewClearanceCountersinkAngle.Value |
90 (millimeters part), 82 (inches part) |
ScrewClearanceCountersinkDiameter.Value |
22.73 (millimeters part), 0.91 (inches part) |
ScrewClearanceDistanceFromSelected.Value |
5.0 (millimeters part), 0.2 (inches part) |
ScrewClearanceEndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
ScrewClearanceEndChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
ScrewClearanceHoleDiameter.Value |
11.0 (millimeters part), 0.4 (inches part) |
ScrewClearanceHoleForm |
Simple |
ScrewClearanceNeckChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
ScrewClearanceNeckChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceReliefDepth.Value |
1.2 (millimeters part), 0.05 (inches part) |
ScrewClearanceStartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
ScrewClearanceStartChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
ScrewClearanceTipAngle.Value |
118 |
StartExtensionEnabled |
True |
StartHoleData.BooleanOperation.Type |
Subtract |
StartHoleData.CounterboreDepth.Value |
25.0 (millimeters part), 1.0 (inches part) |
StartHoleData.CounterboreDiameter.Value |
38.0 (millimeters part), 1.5 (inches part) |
StartHoleData.CountersinkAngle.Value |
90 (millimeters part), 82 (inches part) |
StartHoleData.CountersinkDiameter.Value |
50.0 (millimeters part), 2.0 (inches part) |
StartHoleData.EndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
StartHoleData.EndChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
StartHoleData.HoleDiameter.Value |
25.0 (millimeters part), 1.0 (inches part) |
StartHoleData.HoleForm |
Simple |
StartHoleData.NeckChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
StartHoleData.NeckChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
StartHoleData.ReliefDepth.Value |
1.2 (millimeters part), 0.05 (inches part) |
StartHoleData.StartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
StartHoleData.StartChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
TapDrillDiameter.Value |
8.5 (millimeters part), 0.34 (inches part) |
ThreadDepth.Value |
25.0 (millimeters part), 1.0 (inches part) |
ThreadLengthOption |
Custom |
ThreadRotation |
Right |
ThreadedEndChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
ThreadedEndChamferDiameter.Value |
10.0 (millimeters part), 0.4 (inches part) |
ThreadedHoleDepth.Value |
50.0 (millimeters part), 2.0 (inches part) |
ThreadedReliefAngle.Value |
118.0 (millimeters part), 118.0 (inches part) |
ThreadedReliefChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
ThreadedReliefChamferOffset.Value |
0.6 (millimeters part), 0.024 (inches part) |
ThreadedReliefDepth.Value |
5.0 (millimeters part), 0.2 (inches part) |
ThreadedReliefDiameter.Value |
10.0 (millimeters part), 0.4 (inches part) |
ThreadedStartChamferAngle.Value |
45.0 (millimeters part), 45.0 (inches part) |
ThreadedStartChamferDiameter.Value |
10.0 (millimeters part), 0.4 (inches part) |
ThreadedTipAngle.Value |
118 (millimeters part), 118 (inches part) |
Type |
GeneralHole |
Created in NX5.0.2
Represents thread length options.
This option is applicable for the threaded hole.
|
get |
Returns the boolean operation
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the counter bore depth limit - this is applicable for general and screw clearance hole
Created in NX1899.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the counterbore distance from selected target - this is applicable for general hole, screw clearance hole type
Created in NX1899.0.0
License requirements: None.
|
get |
Returns the counterbore until selected target - this is applicable for general hole, screw clearance hole type
Created in NX1899.0.0
License requirements: None.
|
getset |
Returns or sets the hole depth option
Created in NX11.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the drill size - this is applicable for drill size hole
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the drill size end chamfer angle - this is applicable for drill size hole type
Created in NX6.0.0
License requirements: None.
|
getset |
Returns or sets the drill size end chamfer enabled - this is applicable for drill size hole type
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the drill size end chamfer offset - this is applicable for drill size hole type
Created in NX6.0.0
License requirements: None.
|
getset |
Returns or sets the drill size screw fit Option - this is applicable for drill size hole
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the hole depth - this is applicable for drill size hole
Created in NX6.0.0
License requirements: None.
|
get |
Returns the hole diameter - this is applicable for drill size hole
Created in NX6.0.0
License requirements: None.
|
getset |
Returns or sets the drill size standard - this is applicable for drill size hole type
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the drill size start chamfer angle - this is applicable for drill size hole type
Created in NX6.0.0
License requirements: None.
|
getset |
Returns or sets the drill size start chamfer enabled - this is applicable for drill size hole type
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the drill size start chamfer offset - this is applicable for drill size hole type
Created in NX6.0.0
License requirements: None.
|
get |
Returns the tip angle - this is applicable for drill size hole
Created in NX6.0.0
License requirements: None.
|
get |
Returns the target body
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counter bore depth - this is applicable for general hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counter bore diameter - this is applicable for general hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counterbore hole depth - this is applicable for general hole counterbore form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the counterbore hole diameter - this is applicable for general hole counterbore form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the counter sink angle - this is applicable for general hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counter sink diameter - this is applicable for general hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the countersink hole depth - this is applicable for general hole countersink form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the countersink hole diameter - this is applicable for general hole countersink form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the distance from selected value - this is applicable for counterbore form of general hole
Created in NX1899.0.0
License requirements: None.
|
getset |
Returns or sets the hole form - this is applicable for general hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the simple hole depth - this is applicable for general hole simple form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the simple hole diameter - this is applicable for general hole simple form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the taper angle - this is applicable for general hole
Created in NX6.0.0
License requirements: None.
|
get |
Returns the tapered hole depth - this is applicable for general hole tapered form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the tapered hole diameter - this is applicable for general hole tapered form
Created in NX6.0.0
License requirements: None.
|
get |
Returns the tip angle - this is applicable for general hole
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the hole position
Created in NX5.0.2
License requirements: None.
|
get |
Returns the target body
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the pitch multiplier
Created in NX1899.0.0
License requirements: None.
|
get |
Returns the hole direction options
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the project point on target enabled - this is applicable for projecting input point on target body
Created in NX1899.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the radial engage option - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the relate hole depth to thread depth toggle
Created in NX1899.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the threaded relief chamfer enabled - this is applicable for threaded hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the counter bore depth - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counter bore diameter - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counter sink angle - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the counter sink diameter - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the distance from selected value - this is applicable for counterbore form of screw clearance hole
Created in NX1899.0.0
License requirements: None.
|
get |
Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the end chamfer enabled - this is applicable for screw clearance hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the hole depth - this is applicable for screw clearance hole
Created in NX6.0.0
License requirements: None.
|
get |
Returns the hole diameter - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the hole form - this is applicable for screw clearance hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form
Created in NX5.0.2
License requirements: None.
|
get |
Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form
Created in NX5.0.2
License requirements: None.
|
get |
Returns the relief depth - this is applicable for screw clearence hole type
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the tip angle - this is applicable for screw clearance hole
Created in NX6.0.0
License requirements: None.
|
getset |
Returns or sets the screw fit Option - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the screw size - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the screw standard - this is applicable for screw clearence hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the screw type - this is applicable for screw clearence hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the extend start enabled - this is applicable for start extension to all hole types
Created in NX7.5.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the start target body
Created in NX5.0.2
License requirements: None.
|
get |
Returns the tap drill diameter - this is applicable for threaded hole
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the thread at both ends option - this is applicable for threaded hole type
Created in NX1899.0.0
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the thread depth - this is applicable for threaded hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the threaded end chamfer angle - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the threaded end chamfer offset - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the threaded end chamfer enabled - this is applicable for threaded hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the hole depth - this is applicable for threaded hole
Created in NX5.0.2
License requirements: None.
|
get |
Returns the relief angle - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the threaded relief chamfer angle - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the threaded relief chamfer offset - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the threaded relief depth - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the relief diameter - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the threaded relief enabled - this is applicable for threaded hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the threaded start chamfer angle - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
get |
Returns the threaded start chamfer offset - this is applicable for threaded hole type
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the threaded start chamfer enabled - this is applicable for threaded hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the tip angle - this is applicable for threaded hole
Created in NX5.0.2
License requirements: None.
|
getset |
Returns or sets the thread length option - this is applicable for threaded hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the thread rotation - this is applicable for threaded hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the thread size - this is applicable for threaded hole
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the thread standard - this is applicable for threaded hole type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the distance tolerance
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
getset |
Returns or sets the type
Created in NX5.0.2
License requirements to get this property: None.
License requirements to set this property: solid_modeling ("SOLIDS MODELING")
|
get |
Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type
Created in NX5.0.2
License requirements: None.