Represents a Die Pad Child sub feature. More...

Inheritance diagram for NXOpen.Die.PadChildBuilder:

Public Types
enum	ShapeTypeOption { Rectangular, Circular, Curve }
	Settings for the shape type of the die pad. More...

Public Member Functions
unsafe void	GetHoleAttributes (out string title, out string value, out int color, out string diameterTitle)
	Gets the hole attributes, note existance of attributes depends on usage in main feature. More...

unsafe NXOpen.Point[]	GetHoleCenters ()
	Gets the hole centers of the die pad. More...

unsafe void	GetPadAttributes (out string title, out string value, out int color)
	Gets the pad attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	GetReliefAttributes (out string title, out string value, out int color)
	Gets the relief attributes, note existance of attributes depends on usage in main feature. More...

unsafe NXOpen.IProfile[]	GetShape (out NXOpen.Die.DirectionOption direction)
	Gets the shape profile of the die pads. More...

unsafe void	SetHoleAttributes (string title, string value, int color, string diameterTitle)
	Sets the hole attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetHoleCenters (NXOpen.Point[] holes)
	Sets the hole centers of the die pad. More...

unsafe void	SetPadAttributes (string title, string value, int color)
	Sets the pad attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetReliefAttributes (string title, string value, int color)
	Sets the relief attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetShape (NXOpen.Die.DirectionOption direction, NXOpen.IProfile[] profileEntries)
	Sets the shape profile of the die pad. More...

unsafe void	TranslateLocation (NXOpen.Vector3d translateDist)
	Translates the location of the die pad by the specified amount. More...

Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Die.DieBuildStatusOption	BuildStatus `[get]`
	Returns the build status of the die pad. More...

unsafe bool	CenterHole `[get, set]`
	Returns or sets the center hole switch of the die pad, if true the center hole will be created in the pad, if false it will not. More...

unsafe bool	DesignStatus `[get, set]`
	Returns or sets the design status of the die pad, if true the pad will be built into the model, if false it will not. More...

unsafe double	Diameter `[get, set]`
	Returns or sets the diameter of the die pad. More...

unsafe bool	DisplayStatus `[get, set]`
	Returns or sets the display status of the die pad, if true input data to the pad will be displayed, if false the input data will not be displayed. More...

unsafe double	Height `[get, set]`
	Returns or sets the height of the die pad. More...

unsafe double	HoleDiameter `[get, set]`
	Returns or sets the hole diameter of the die pad. More...

unsafe double	Length `[get, set]`
	Returns or sets the length of the die pad. More...

unsafe NXOpen.IOrientation	LimitingSurface `[get, set]`
	Returns or sets the limiting surface of the die pad. More...

unsafe NXOpen.ILocation	Location `[get, set]`
	Returns or sets the location of the die pad. More...

unsafe double	LocationOffset `[get, set]`
	Returns or sets the location offset of the die pad. More...

unsafe NXOpen.IReferenceAxis	LocationOffsetDirection `[get, set]`
	Returns or sets the location offset direction of the die pad. More...

unsafe NXOpen.IOrientation	OrientationPlane `[get, set]`
	Returns or sets the orientation plane of the die pad. More...

unsafe bool	Relief `[get, set]`
	Returns or sets the relief switch of the die pad, if true the relief will be built around the pad, if false it will not. More...

unsafe double	ReliefDepth `[get, set]`
	Returns or sets the relief depth of the die pad. More...

unsafe double	ReliefWidth `[get, set]`
	Returns or sets the relief width of the die pad. More...

unsafe bool	ReverseOrientation `[get, set]`
	Returns or sets the value to reverse the orientation of the orientation plane, if true the pad orientation normal will be reversed, if false it will not. More...

unsafe NXOpen.Die.PadChildBuilder.ShapeTypeOption	ShapeType `[get, set]`
	Returns or sets the shape type of the die pad. More...

unsafe double	SurfaceOffset `[get, set]`
	Returns or sets the surface offset of the die pad. More...

unsafe double	Width `[get, set]`
	Returns or sets the width of the die pad. More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Die Pad Child sub feature.

This sub feature is created via the main feature builder.

Created in NX4.0.0

Member Enumeration Documentation

enum NXOpen.Die.PadChildBuilder.ShapeTypeOption

Settings for the shape type of the die pad.

Enumerator
Rectangular	Rectangular pad.
Circular	Circular pad.
Curve	Curve defined pad.

Member Function Documentation

unsafe void NXOpen.Die.PadChildBuilder.GetHoleAttributes	(	out string	title,
		out string	value,
		out int	color,
		out string	diameterTitle
	)

inline

Gets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.

unsafe NXOpen.Point [] NXOpen.Die.PadChildBuilder.GetHoleCenters ( )

inline

Gets the hole centers of the die pad.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Returns: The hole centers.

unsafe void NXOpen.Die.PadChildBuilder.GetPadAttributes	(	out string	title,
		out string	value,
		out int	color
	)

inline

Gets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

unsafe void NXOpen.Die.PadChildBuilder.GetReliefAttributes	(	out string	title,
		out string	value,
		out int	color
	)

inline

Gets the relief attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of relief faces.

unsafe NXOpen.IProfile [] NXOpen.Die.PadChildBuilder.GetShape ( out NXOpen.Die.DirectionOption direction )

inline

Gets the shape profile of the die pads.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction Profile direction.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.PadChildBuilder.SetHoleAttributes	(	string	title,
		string	value,
		int	color,
		string	diameterTitle
	)

inline

Sets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.

unsafe void NXOpen.Die.PadChildBuilder.SetHoleCenters ( NXOpen.Point[] holes )

inline

Sets the hole centers of the die pad.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

holes The hole centers.

unsafe void NXOpen.Die.PadChildBuilder.SetPadAttributes	(	string	title,
		string	value,
		int	color
	)

inline

Sets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

unsafe void NXOpen.Die.PadChildBuilder.SetReliefAttributes	(	string	title,
		string	value,
		int	color
	)

inline

Sets the relief attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of relief faces.

unsafe void NXOpen.Die.PadChildBuilder.SetShape	(	NXOpen.Die.DirectionOption	direction,
		NXOpen.IProfile[]	profileEntries
	)

inline

Sets the shape profile of the die pad.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.PadChildBuilder.TranslateLocation ( NXOpen.Vector3d translateDist )

inline

Translates the location of the die pad by the specified amount.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

translateDist A scaled vector indicating the distance to translate

Property Documentation

unsafe NXOpen.Die.DieBuildStatusOption NXOpen.Die.PadChildBuilder.BuildStatus

get

Returns the build status of the die pad.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.PadChildBuilder.CenterHole

getset

Returns or sets the center hole switch of the die pad, if true the center hole will be created in the pad, if false it will not.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")