Represents a Die Hole Parent sub feature. More...

Inheritance diagram for NXOpen.Die.HoleParentBuilder:

Public Member Functions
unsafe NXOpen.Die.HoleChildBuilder	CreateChild ()
	Creates a child hole. More...

unsafe void	DeleteChild (NXOpen.Die.HoleChildBuilder dieholechild)
	Deletes a child hole. More...

unsafe NXOpen.Die.HoleChildBuilder[]	GetChildren ()
	Outputs the child holes. More...

unsafe void	GetHoleAttributes (out string title, out string value, out int color, out string diameterTitle, out string depthTitle, out string counterBoreDiameterTitle)
	Gets the hole attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	GetPadAttributes (out string title, out string value, out int color)
	Gets the pad attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetHoleAttributes (string title, string value, int color, string diameterTitle, string depthTitle, string counterBoreDiameterTitle)
	Sets the hole attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetPadAttributes (string title, string value, int color)
	Sets the pad attributes, note existance of attributes depends on usage in main feature. More...

Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Die.DieBuildStatusOption	BuildStatus `[get]`
	Returns the build status of die holes. More...

unsafe double	CounterBoreDiameter `[get, set]`
	Returns or sets the counter bore diameter of die holes. More...

unsafe bool	CreateWithPad `[get, set]`
	Returns or sets the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created. More...

unsafe double	Depth `[get, set]`
	Returns or sets the depth of die holes. More...

unsafe bool	DesignStatus `[get, set]`
	Returns or sets the design status of die holes, if true the holes will be built into the model, if false they will not. More...

unsafe double	Diameter `[get, set]`
	Returns or sets the diameter of die holes. More...

unsafe bool	DisplayHoles `[get, set]`
	Returns or sets the display holes switch of die holes, if true the holes will be built into the model, if false they will not. More...

unsafe bool	DisplayStatus `[get, set]`
	Returns or sets the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed. More...

unsafe double	DropThruDiameter `[get, set]`
	Returns or sets the drop thru diameter of die holes. More...

unsafe double	PadDiameter `[get, set]`
	Returns or sets the pad diameter of die holes. More...

unsafe double	PadHeight `[get, set]`
	Returns or sets the pad height of die holes. More...

unsafe double	PlaneOffset `[get, set]`
	Returns or sets the plane offset of die holes. More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Die Hole Parent sub feature.

This sub feature is created via the main feature builder.

Created in NX4.0.0

Member Function Documentation

unsafe NXOpen.Die.HoleChildBuilder NXOpen.Die.HoleParentBuilder.CreateChild ( )

inline

Creates a child hole.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Returns

unsafe void NXOpen.Die.HoleParentBuilder.DeleteChild ( NXOpen.Die.HoleChildBuilder dieholechild )

inline

Deletes a child hole.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

dieholechild

unsafe NXOpen.Die.HoleChildBuilder [] NXOpen.Die.HoleParentBuilder.GetChildren ( )

inline

Outputs the child holes.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Returns: The child holes.

unsafe void NXOpen.Die.HoleParentBuilder.GetHoleAttributes	(	out string	title,
		out string	value,
		out int	color,
		out string	diameterTitle,
		out string	depthTitle,
		out string	counterBoreDiameterTitle
	)

inline

Gets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.
depthTitle	Title for depth attribute.
counterBoreDiameterTitle	Title for counter bore diameter attribute.

unsafe void NXOpen.Die.HoleParentBuilder.GetPadAttributes	(	out string	title,
		out string	value,
		out int	color
	)

inline

Gets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

unsafe void NXOpen.Die.HoleParentBuilder.SetHoleAttributes	(	string	title,
		string	value,
		int	color,
		string	diameterTitle,
		string	depthTitle,
		string	counterBoreDiameterTitle
	)

inline

Sets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.
depthTitle	Title for depth attribute.
counterBoreDiameterTitle	Title for counter bore diameter attribute.

unsafe void NXOpen.Die.HoleParentBuilder.SetPadAttributes	(	string	title,
		string	value,
		int	color
	)

inline

Sets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

Property Documentation

unsafe NXOpen.Die.DieBuildStatusOption NXOpen.Die.HoleParentBuilder.BuildStatus

get

Returns the build status of die holes.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.CounterBoreDiameter

getset

Returns or sets the counter bore diameter of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.HoleParentBuilder.CreateWithPad

getset

Returns or sets the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.Depth

getset

Returns or sets the depth of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.HoleParentBuilder.DesignStatus

getset

Returns or sets the design status of die holes, if true the holes will be built into the model, if false they will not.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.Diameter

getset

Returns or sets the diameter of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.HoleParentBuilder.DisplayHoles

getset

Returns or sets the display holes switch of die holes, if true the holes will be built into the model, if false they will not.

Note that this setting has the same affect as design status, unless the create with pad switch is true.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.HoleParentBuilder.DisplayStatus

getset

Returns or sets the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.DropThruDiameter

getset

Returns or sets the drop thru diameter of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.PadDiameter

getset

Returns or sets the pad diameter of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.PadHeight

getset

Returns or sets the pad height of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe double NXOpen.Die.HoleParentBuilder.PlaneOffset

getset

Returns or sets the plane offset of die holes.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

The documentation for this class was generated from the following file:

Die_HoleParentBuilder.cs

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

Property Documentation