Represents a builder that is used to create or edit a NXOpen.Die.FillArea feature. More...

Inheritance diagram for NXOpen.Die.FillAreaBuilder:

Public Types
enum	Types { BaseFlange, ProductContact, ScrapArea, UserDefined }
	Identifies the area of the casting the fill is targeted for. More...

enum	UpperLimitTypes { Sheet, Plane }
	Specifies how the upper limit of the fill area is defined. More...

Properties
unsafe double	AngleTolerance `[get, set]`
	Returns or sets the angle tolerance. More...

unsafe NXOpen.Die.DiePlaneBuilder	BaseOrientation `[get]`
	Returns the plane defining the base of the target solid. More...

unsafe NXOpen.Section	Boundary `[get]`
	Returns the closed boundary profile that defines the fill area. More...

unsafe double	DistanceTolerance `[get, set]`
	Returns or sets the distance tolerance. More...

unsafe NXOpen.Expression	LowerLimitOffset `[get]`
	Returns the expression containing the lower limit offset used to adjust the lower limit to ensure a boolean. More...

unsafe NXOpen.SelectBody	LowerLimitSheet `[get]`
	Returns the sheet (such as the inner deck sheet) used to trim the fill area solid. More...

unsafe NXOpen.SelectBody	Target `[get]`
	Returns the target solid the fill area will be united with or subtracted from. More...

unsafe NXOpen.Die.FillAreaBuilder.Types	Type `[get, set]`
	Returns or sets the indicator for the type of fill area to build. More...

unsafe NXOpen.Die.DiePlaneBuilder	UpperLimitPlane `[get]`
	Returns the plane used to trim the fill area solid. More...

unsafe NXOpen.SelectBody	UpperLimitSheet `[get]`
	Returns the sheet (such as the sheet metal) used to trim the fill area solid. More...

unsafe NXOpen.Die.FillAreaBuilder.UpperLimitTypes	UpperLimitType `[get, set]`
	Returns or sets the value that determines whether the upper limit is defined by a sheet or plane. More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a builder that is used to create or edit a NXOpen.Die.FillArea feature.

To create a new instance of this class, use NXOpen.Die.DieCollection.CreateFillAreaBuilder

Default values.

Property

Value

LowerLimitOffset.Value

1 (millimeters part), 0.04 (inches part)

UpperLimitType

Sheet

Created in NX7.5.0

Member Enumeration Documentation

enum NXOpen.Die.FillAreaBuilder.Types

Identifies the area of the casting the fill is targeted for.

Enumerator
BaseFlange	Fill area is in the base flange area.
ProductContact	Fill area is in the upper deck where relief for the product has been added.
ScrapArea	Remove the volume instead of filling. Targeted for the outer trim line area.
UserDefined	The user must defined all the constraints for the area (inputs from the target are ignored).

enum NXOpen.Die.FillAreaBuilder.UpperLimitTypes

Specifies how the upper limit of the fill area is defined.

Enumerator
Sheet	Upper limit is defined by a sheet body.
Plane	Upper limit is defined by a plane.

Property Documentation

unsafe double NXOpen.Die.FillAreaBuilder.AngleTolerance

getset

Returns or sets the angle tolerance.

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Die.DiePlaneBuilder NXOpen.Die.FillAreaBuilder.BaseOrientation

get

Returns the plane defining the base of the target solid.

Used to orient the direction of the build and the trims for the fill area. May be supplied by the selected target.

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.Section NXOpen.Die.FillAreaBuilder.Boundary

get

Returns the closed boundary profile that defines the fill area.

Created in NX7.5.0

License requirements: None.

unsafe double NXOpen.Die.FillAreaBuilder.DistanceTolerance

getset

Returns or sets the distance tolerance.

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.FillAreaBuilder.LowerLimitOffset

get

Returns the expression containing the lower limit offset used to adjust the lower limit to ensure a boolean.

A positive value will indicate transforming the limit away from the upper limit.

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.SelectBody NXOpen.Die.FillAreaBuilder.LowerLimitSheet

get

Returns the sheet (such as the inner deck sheet) used to trim the fill area solid.

This might be a sheet that is interior to the upper deck, but is always defined between the base and the upper limit. Only valid when type is Die.FillAreaBuilder.Types.ProductContact or Die.FillAreaBuilder.Types.UserDefined .

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.SelectBody NXOpen.Die.FillAreaBuilder.Target

get

Returns the target solid the fill area will be united with or subtracted from.

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.Die.FillAreaBuilder.Types NXOpen.Die.FillAreaBuilder.Type

getset

Returns or sets the indicator for the type of fill area to build.

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Die.DiePlaneBuilder NXOpen.Die.FillAreaBuilder.UpperLimitPlane

get

Returns the plane used to trim the fill area solid.

A plane might be used to limit the fill area solid to just the flange of the casting. Only valid when type is Die.FillAreaBuilder.UpperLimitTypes.Plane .

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.SelectBody NXOpen.Die.FillAreaBuilder.UpperLimitSheet

get

Returns the sheet (such as the sheet metal) used to trim the fill area solid.

Only valid when type is Die.FillAreaBuilder.UpperLimitTypes.Sheet .

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.Die.FillAreaBuilder.UpperLimitTypes NXOpen.Die.FillAreaBuilder.UpperLimitType

getset

Returns or sets the value that determines whether the upper limit is defined by a sheet or plane.

Only valid when type is Die.FillAreaBuilder.Types.ScrapArea or Die.FillAreaBuilder.Types.UserDefined .

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: ug_die_design ("Die Design")

The documentation for this class was generated from the following file:

Die_FillAreaBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation