Represents a Die Deck Feature sub feature. More...

Inheritance diagram for NXOpen.Die.DeckParentBuilder:

Public Member Functions
unsafe NXOpen.IProfile[]	GetBaseFlange (out NXOpen.Die.DirectionOption direction)
	Gets the base flange profile of the draw die punch. More...

unsafe NXOpen.IProfile[]	GetBinderEdge (out NXOpen.Die.DirectionOption direction)
	Gets the binder edge profile of the upper draw die deck. More...

unsafe NXOpen.IProfile[]	GetIntermediateDeck (out NXOpen.Die.DirectionOption direction)
	Gets the intermediate deck profile of the deck. More...

unsafe NXOpen.IProfile[]	GetMainDeck (out NXOpen.Die.DirectionOption direction)
	Gets the main deck profile of the upper draw die deck. More...

unsafe NXOpen.IProfile[]	GetMainWallCenterline (out NXOpen.Die.DirectionOption direction)
	Gets the main wall centerline profile of the draw die punch. More...

unsafe void	SetBaseFlange (NXOpen.Die.DirectionOption direction, NXOpen.IProfile[] profileEntries)
	Sets the base flange profile of the draw die punch. More...

unsafe void	SetBinderEdge (NXOpen.Die.DirectionOption direction, NXOpen.IProfile[] profileEntries)
	Sets the binder edge profile of the upper draw die deck. More...

unsafe void	SetIntermediateDeck (NXOpen.Die.DirectionOption direction, NXOpen.IProfile[] profileEntries)
	Sets the intermediate deck profile of the deck. More...

unsafe void	SetMainDeck (NXOpen.Die.DirectionOption direction, NXOpen.IProfile[] profileEntries)
	Sets the main deck profile of the upper draw die deck. More...

unsafe void	SetMainWallCenterline (NXOpen.Die.DirectionOption direction, NXOpen.IProfile[] profileEntries)
	Sets the main wall centerline profile of the draw die punch. More...

Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Die.DieBuildStatusOption	BuildStatus `[get]`
	Returns the build status of deck. More...

unsafe bool	DesignStatus `[get, set]`
	Returns or sets the design status of deck, if true the deck will be built into the model, if false it will not. More...

unsafe bool	DisplayStatus `[get, set]`
	Returns or sets the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed. More...

unsafe NXOpen.Body	InnerDeckSheet `[get, set]`
	Returns or sets the inner deck sheet of deck. More...

unsafe NXOpen.ISurface	IntermediateDeckOrientation `[get, set]`
	Returns or sets the intermediate deck orientation of the deck. More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Die Deck Feature sub feature.

Used by the Upper Draw Die and Draw Die Punch to capture the deck definition. Unless specified, the attributes and methods are generic and can be applied to any type of deck.

This sub feature is created via the main feature builder.

Created in NX4.0.0

Member Function Documentation

unsafe NXOpen.IProfile [] NXOpen.Die.DeckParentBuilder.GetBaseFlange ( out NXOpen.Die.DirectionOption direction )

inline

Gets the base flange profile of the draw die punch.

Knowledge Fusion: Binder Edge of Upper Draw Die.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction Profile direction.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.

unsafe NXOpen.IProfile [] NXOpen.Die.DeckParentBuilder.GetBinderEdge ( out NXOpen.Die.DirectionOption direction )

inline

Gets the binder edge profile of the upper draw die deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction Profile direction.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.

unsafe NXOpen.IProfile [] NXOpen.Die.DeckParentBuilder.GetIntermediateDeck ( out NXOpen.Die.DirectionOption direction )

inline

Gets the intermediate deck profile of the deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction Profile direction.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.

unsafe NXOpen.IProfile [] NXOpen.Die.DeckParentBuilder.GetMainDeck ( out NXOpen.Die.DirectionOption direction )

inline

Gets the main deck profile of the upper draw die deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction Profile direction.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.

unsafe NXOpen.IProfile [] NXOpen.Die.DeckParentBuilder.GetMainWallCenterline ( out NXOpen.Die.DirectionOption direction )

inline

Gets the main wall centerline profile of the draw die punch.

Knowledge Fusion: Main Deck of Upper Draw Die.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction Profile direction.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.DeckParentBuilder.SetBaseFlange	(	NXOpen.Die.DirectionOption	direction,
		NXOpen.IProfile[]	profileEntries
	)

inline

Sets the base flange profile of the draw die punch.

Knowledge Fusion: Binder Edge of Upper Draw Die.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.DeckParentBuilder.SetBinderEdge	(	NXOpen.Die.DirectionOption	direction,
		NXOpen.IProfile[]	profileEntries
	)

inline

Sets the binder edge profile of the upper draw die deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.DeckParentBuilder.SetIntermediateDeck	(	NXOpen.Die.DirectionOption	direction,
		NXOpen.IProfile[]	profileEntries
	)

inline

Sets the intermediate deck profile of the deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.DeckParentBuilder.SetMainDeck	(	NXOpen.Die.DirectionOption	direction,
		NXOpen.IProfile[]	profileEntries
	)

inline

Sets the main deck profile of the upper draw die deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

unsafe void NXOpen.Die.DeckParentBuilder.SetMainWallCenterline	(	NXOpen.Die.DirectionOption	direction,
		NXOpen.IProfile[]	profileEntries
	)

inline

Sets the main wall centerline profile of the draw die punch.

Knowledge Fusion: Main Deck of Upper Draw Die.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

Property Documentation

unsafe NXOpen.Die.DieBuildStatusOption NXOpen.Die.DeckParentBuilder.BuildStatus

get

Returns the build status of deck.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.DeckParentBuilder.DesignStatus

getset

Returns or sets the design status of deck, if true the deck will be built into the model, if false it will not.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.DeckParentBuilder.DisplayStatus

getset

Returns or sets the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Body NXOpen.Die.DeckParentBuilder.InnerDeckSheet

getset

Returns or sets the inner deck sheet of deck.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.ISurface NXOpen.Die.DeckParentBuilder.IntermediateDeckOrientation

getset

Returns or sets the intermediate deck orientation of the deck.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

The documentation for this class was generated from the following file:

Die_DeckParentBuilder.cs

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

Property Documentation