Represents a WedmOperation Builder More...

Inheritance diagram for NXOpen.CAM.WedmOperationBuilder:

Public Types
enum	BackburnPassesTypes { Single, MultipleRegionFirst, MultipleCutoffFirst, SingleLastFinish }
	the types available for wedm backburn passes More...

enum	ConvexCornerTypes { RollAround, Loops, ExtendAndTrim }
	the types available for convex corner control More...

enum	CornerSmoothingType { None, AllPasses }
	the types available for corner smoothing More...

enum	InPathUdeSetTypes { Start = 1, End }
	Represents the in path ude set type More...

enum	SmoothLeadInTypes { None, Specify }
	the types available for smooth_lead_in More...

enum	SmoothLeadOutTypes { None, Specify }
	the types available for smooth_lead_out_types More...

enum	StopPointFlagTypes { None, Specify }
	the types available for wedm stop point More...

enum	StopPointTypes { Opstop, Stop }
	the types available for wedm stop point More...

Public Types inherited from NXOpen.CAM.OperationBuilder
enum	HoleAxisTypes { Vector, Rule, RuleIfNoVector }
	Available types for Hole Axis Type in feature milling and hole making More...

enum	HoleDepthTypes { Point, Rule }
	Available types for Hole Depth Type in feature milling and hole making More...

enum	OptimizationBasedOnTypes { Dist, Orient }
	Available types for optimization based on in operation More...

enum	OptimizationDistanceTypes { Direct, Transition }
	Available types for optimization distance method in operation More...

enum	OptimizationLevelTypes { Standard, Advanced }
	Available types for optimization level in operation More...

Public Types inherited from NXOpen.CAM.ParamBuilder
enum	OptimizationTypes { None, MinimizeTravel, Band }
	Available types for Optimization Method in operation More...

Public Member Functions
unsafe void	ExecuteApiExit ()
	Execute api exit More...

unsafe NXOpen.CAM.InPathEventSetData	GetInPathEventSetData (int passNumber, NXOpen.CAM.WedmOperationBuilder.InPathUdeSetTypes inPathEventType)
	Returns the in path event data More...

Public Member Functions inherited from NXOpen.CAM.OperationBuilder
unsafe double[]	GetHoleAxisValues ()
	Get the Hole Axis values More...

unsafe void	SetHoleAxisValues (double[] holeAxis)
	Set the Hole Axis values More...

Public Member Functions inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.TaggedObject	GetCustomizableItemBuilder (string name)
	Returns the customizable item builder for the given customizable item name More...

unsafe string[]	GetCustomizableItemNames ()
	Returns the names for all customizable item ids More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe string	ApiExitName `[get, set]`
	Returns or sets the api exit name More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	BackburnDistanceBuilder `[get]`
	Returns the backburn_distance builder More...

unsafe int	BackburnFlag `[get, set]`
	Returns or sets the Rough and Backburn Flag More...

unsafe NXOpen.CAM.WedmOperationBuilder.BackburnPassesTypes	BackburnPasses `[get, set]`
	Returns or sets the Backburn Passes More...

unsafe NXOpen.CAM.BoundaryWireEDM	Boundary `[get]`
	Returns the wedm boundary More...

unsafe NXOpen.CAM.WedmOperationBuilder.ConvexCornerTypes	ConvexCorner `[get, set]`
	Returns or sets the convex_corner More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CornerMaximumAngleBuilder `[get]`
	Returns the corner_maximum_angle builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CornerMinimumAngleBuilder `[get]`
	Returns the corner_minimum_angle builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CornerRadiusBuilder `[get]`
	Returns the corner_radius builder More...

unsafe NXOpen.CAM.WedmCustomBoundaryDataBuilderList	CustomBoundaryDataList `[get]`
	Returns the custom boundary data list More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CutoffDistanceBuilder `[get]`
	Returns the cutoff_distance builder More...

unsafe int	CutoffFlag `[get, set]`
	Returns or sets the Cutoff Flag More...

unsafe NXOpen.CAM.InheritableIntBuilder	CutoffFlagBuilder `[get]`
	Returns the cutoff_flag builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CutoffStockBuilder `[get]`
	Returns the cutoff_stock builder More...

unsafe NXOpen.CAM.WedmCutParameters	CutParameters `[get]`
	Returns the cut parameter object More...

unsafe NXOpen.CAM.CutPatternBuilder	CutPattern `[get]`
	Returns the cut pattern More...

unsafe NXOpen.CAM.FeedsWedmBuilder	FeedsBuilder `[get]`
	Returns the feeds builder More...

unsafe NXOpen.CAM.InheritableIntBuilder	FinishPassesBuilder `[get]`
	Returns the finish_passes builder More...

unsafe NXOpen.CAM.BoundaryInnerWireEDM	InnerBoundary `[get]`
	Returns the inner wedm boundary More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutCiBuilder `[get]`
	Returns the Save Layer/Layout builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	LeadInCircleAngleBuilder `[get]`
	Returns the lead_in_circle_angle_builder More...

unsafe NXOpen.CAM.WedmPointDefinitionBuilder	LeadInPointBuilder `[get]`
	Returns the lead_in_point Builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	LeadInRadiusBuilder `[get]`
	Returns the lead_in_radius_builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	LeadOutCircleAngleBuilder `[get]`
	Returns the lead_out_circle_angle_builder More...

unsafe NXOpen.CAM.WedmPointDefinitionBuilder	LeadOutPointBuilder `[get]`
	Returns the lead_out_point Builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	LeadOutRadiusBuilder `[get]`
	Returns the lead_out_radius_builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	LoopRadius `[get]`
	Returns the loop radius More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	MaximumLoopAngle `[get]`
	Returns the maximum loop angle More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	MinimumLoopAngle `[get]`
	Returns the minimum loop angle More...

unsafe NXOpen.CAM.NcmWedmBuilder	NcmWedmBuilder `[get]`
	Returns the non-cutting builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	NocoreStockBuilder `[get]`
	Returns the nocore_stock builder More...

unsafe int	NumTabs `[get, set]`
	Returns or sets the Tab Points More...

unsafe int	RegionMethod `[get, set]`
	Returns or sets the Tab Points Region Method More...

unsafe NXOpen.CAM.WedmPointDefinitionBuilder	RetractPointBuilder `[get]`
	Returns the retract_point Builder More...

unsafe NXOpen.CAM.InheritableIntBuilder	RoughPassesBuilder `[get]`
	Returns the rough_passes builder More...

unsafe NXOpen.CAM.WedmOperationBuilder.CornerSmoothingType	Smoothing `[get, set]`
	Returns or sets the smoothing More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SmoothLeadInDistanceBuilder `[get]`
	Returns the smooth_lead_in_distance builder More...

unsafe NXOpen.CAM.WedmOperationBuilder.SmoothLeadInTypes	SmoothLeadInOption `[get, set]`
	Returns or sets the Smooth Leadin Flag More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SmoothLeadOutDistanceBuilder `[get]`
	Returns the smooth_lead_out_distance builder More...

unsafe NXOpen.CAM.WedmOperationBuilder.SmoothLeadOutTypes	SmoothLeadOutOption `[get, set]`
	Returns or sets the Smooth Leadout Flag More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	StopPointDistanceBuilder `[get]`
	Returns the stop_point_distance builder More...

unsafe NXOpen.CAM.WedmOperationBuilder.StopPointFlagTypes	StopPointFlag `[get, set]`
	Returns or sets the Stop Point Flag More...

unsafe NXOpen.CAM.WedmOperationBuilder.StopPointTypes	StopPointType `[get, set]`
	Returns or sets the Stop Point Type More...

unsafe NXOpen.CAM.WedmPointDefinitionBuilder	ThreadHolePointBuilder `[get]`
	Returns the thread_hole_point Builder More...

unsafe NXOpen.CAM.WedmArcOutputTypeCiBuilder	WedmArcOutputTypeCiBuilder `[get]`
	Returns the wedm arc output type Builder More...

unsafe NXOpen.CAM.WedmStatusControlCiBuilder	WedmStatusControlCiBuilder `[get]`
	Returns the wedm status control ci Builder More...

Properties inherited from NXOpen.CAM.OperationBuilder
unsafe string	ChannelName `[get, set]`
	Returns or sets the channel's name More...

unsafe string	Description `[get, set]`
	Returns or sets the description More...

unsafe NXOpen.CAM.PostEventsCiBuilder	EndOfPath `[get]`
	Returns the end event builder More...

unsafe NXOpen.CAM.UdeSet	EndUdeSet `[get]`
	Returns the end ude set More...

unsafe NXOpen.CAM.GeometryCiBuilder	Geometry `[get]`
	Returns the geometry builder More...

unsafe bool	GougeChecking `[get, set]`
	Returns or sets the gouge checking flag More...

unsafe NXOpen.CAM.OperationBuilder.HoleAxisTypes	HoleAxisType `[get, set]`
	Returns or sets the Hole Axis Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	HoleDepth `[get]`
	Returns the max depth distance builder More...

unsafe NXOpen.CAM.OperationBuilder.HoleDepthTypes	HoleDepthType `[get, set]`
	Returns or sets the Hole Depth Type More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutAndLayer `[get]`
	Returns the Layer and Layout More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutputBuilder `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Notes	Notes `[get]`
	Returns the notes builder More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationBasedOnTypes	OptimizationBasedOn `[get, set]`
	Returns or sets the optimization based on in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationDistanceTypes	OptimizationDistanceMethod `[get, set]`
	Returns or sets the optimization distance method in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationLevelTypes	OptimizationLevel `[get, set]`
	Returns or sets the optimization level in operation More...

unsafe NXOpen.CAM.OperationDisplayOptionsBuilder	PathDisplayOptions `[get]`
	Returns the path display options builder More...

unsafe string	PostToolPathExit `[get, set]`
	Returns or sets the environment variable that points to the post tool path generation library which has the exit More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistance `[get]`
	Returns the Retract Distance builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistanceOnToolAxisChange `[get]`
	Returns the Retract Distance on Tool Axis Change builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SafeClearance `[get]`
	Returns the safe clearance builder More...

unsafe bool	SelectToolFlag `[get, set]`
	Returns or sets the user selected tool More...

unsafe NXOpen.CAM.PostEventsCiBuilder	StartOfPath `[get]`
	Returns the start event builder More...

unsafe NXOpen.CAM.UdeSet	StartUdeSet `[get]`
	Returns the start ude set More...

unsafe NXOpen.CAM.ToolChangeCiBuilder	ToolChangeSetting `[get]`
	Returns the tool change builder More...

unsafe NXOpen.CAM.ToolPathEditorBuilder	ToolPathEditor `[get]`
	Returns the Tool Path Editor Builder More...

unsafe NXOpen.CAM.ToolPathSplitParametersBuilder	ToolPathSplitParametersBuilder `[get]`
	Returns the tool path split Parameters More...

Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent `[get]`
	Returns the cycle event More...

unsafe NXOpen.CAM.Cycle	CycleTable `[get]`
	Returns the cycle More...

unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod `[get, set]`
	Returns or sets the optim method More...

unsafe NXOpen.CAM.NCGroup	TargetPocket `[get, set]`
	Returns or sets the target pocket More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a WedmOperation Builder

To create a new instance of this class, use NXOpen.CAM.OperationCollection.CreateWedmOperationBuilder

Created in NX7.5.0

Member Enumeration Documentation

enum NXOpen.CAM.WedmOperationBuilder.BackburnPassesTypes

the types available for wedm backburn passes

Enumerator
Single	single backburn pass
MultipleRegionFirst	multiple backburn passes - region first
MultipleCutoffFirst	multiple backburn passes - cutoff first
SingleLastFinish	single backburn pass - last finish

enum NXOpen.CAM.WedmOperationBuilder.ConvexCornerTypes

the types available for convex corner control

Enumerator
RollAround	roll around
Loops	loop
ExtendAndTrim	extend tangents

enum NXOpen.CAM.WedmOperationBuilder.CornerSmoothingType

the types available for corner smoothing

Enumerator
None	none
AllPasses	all passes

enum NXOpen.CAM.WedmOperationBuilder.InPathUdeSetTypes

Represents the in path ude set type

Enumerator
Start	in path ude set at start
End	in path ude set at end

enum NXOpen.CAM.WedmOperationBuilder.SmoothLeadInTypes

the types available for smooth_lead_in

Enumerator
None	smooth leadin type none
Specify	smooth leadin type specify

enum NXOpen.CAM.WedmOperationBuilder.SmoothLeadOutTypes

the types available for smooth_lead_out_types

Enumerator
None	smooth leadin type none
Specify	smooth leadin type specify

enum NXOpen.CAM.WedmOperationBuilder.StopPointFlagTypes

the types available for wedm stop point

Enumerator
None	stop point option none
Specify	stop point option specify

enum NXOpen.CAM.WedmOperationBuilder.StopPointTypes

the types available for wedm stop point

Enumerator
Opstop	stop point option opstop
Stop	stop point option stop

Member Function Documentation

unsafe void NXOpen.CAM.WedmOperationBuilder.ExecuteApiExit ( )

inline

Execute api exit

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InPathEventSetData NXOpen.CAM.WedmOperationBuilder.GetInPathEventSetData	(	int	passNumber,
		NXOpen.CAM.WedmOperationBuilder.InPathUdeSetTypes	inPathEventType
	)

inline

Returns the in path event data

Created in NX7.5.0

License requirements: None.

Parameters

passNumber	the pass number
inPathEventType	in path ude set type

Returns: the InPathEventSetData builder

Property Documentation

unsafe string NXOpen.CAM.WedmOperationBuilder.ApiExitName

getset

Returns or sets the api exit name

Created in NX8.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.BackburnDistanceBuilder

get

Returns the backburn_distance builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.WedmOperationBuilder.BackburnFlag

getset

Returns or sets the Rough and Backburn Flag

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.BackburnPassesTypes NXOpen.CAM.WedmOperationBuilder.BackburnPasses

getset

Returns or sets the Backburn Passes

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.BoundaryWireEDM NXOpen.CAM.WedmOperationBuilder.Boundary

get

Returns the wedm boundary

Created in NX12.0.2

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.ConvexCornerTypes NXOpen.CAM.WedmOperationBuilder.ConvexCorner

getset

Returns or sets the convex_corner

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.CornerMaximumAngleBuilder

get

Returns the corner_maximum_angle builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.CornerMinimumAngleBuilder

get

Returns the corner_minimum_angle builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.CornerRadiusBuilder

get

Returns the corner_radius builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmCustomBoundaryDataBuilderList NXOpen.CAM.WedmOperationBuilder.CustomBoundaryDataList

get

Returns the custom boundary data list

Created in NX8.0.1

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.CutoffDistanceBuilder

get

Returns the cutoff_distance builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.WedmOperationBuilder.CutoffFlag

getset

Returns or sets the Cutoff Flag

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.WedmOperationBuilder.CutoffFlagBuilder

get

Returns the cutoff_flag builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.CutoffStockBuilder

get

Returns the cutoff_stock builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmCutParameters NXOpen.CAM.WedmOperationBuilder.CutParameters

get

Returns the cut parameter object

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.CutPatternBuilder NXOpen.CAM.WedmOperationBuilder.CutPattern

get

Returns the cut pattern

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.FeedsWedmBuilder NXOpen.CAM.WedmOperationBuilder.FeedsBuilder

get

Returns the feeds builder

Created in NX11.0.2

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.WedmOperationBuilder.FinishPassesBuilder

get

Returns the finish_passes builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.BoundaryInnerWireEDM NXOpen.CAM.WedmOperationBuilder.InnerBoundary

get

Returns the inner wedm boundary

Created in NX12.0.2

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.LayoutCiBuilder NXOpen.CAM.WedmOperationBuilder.LayoutCiBuilder

get

Returns the Save Layer/Layout builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.LeadInCircleAngleBuilder

get

Returns the lead_in_circle_angle_builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmPointDefinitionBuilder NXOpen.CAM.WedmOperationBuilder.LeadInPointBuilder

get

Returns the lead_in_point Builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.LeadInRadiusBuilder

get

Returns the lead_in_radius_builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.LeadOutCircleAngleBuilder

get

Returns the lead_out_circle_angle_builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmPointDefinitionBuilder NXOpen.CAM.WedmOperationBuilder.LeadOutPointBuilder

get

Returns the lead_out_point Builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.LeadOutRadiusBuilder

get

Returns the lead_out_radius_builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.LoopRadius

get

Returns the loop radius

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.MaximumLoopAngle

get

Returns the maximum loop angle

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.MinimumLoopAngle

get

Returns the minimum loop angle

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.NcmWedmBuilder NXOpen.CAM.WedmOperationBuilder.NcmWedmBuilder

get

Returns the non-cutting builder

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.NocoreStockBuilder

get

Returns the nocore_stock builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.WedmOperationBuilder.NumTabs

getset

Returns or sets the Tab Points

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.WedmOperationBuilder.RegionMethod

getset

Returns or sets the Tab Points Region Method

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmPointDefinitionBuilder NXOpen.CAM.WedmOperationBuilder.RetractPointBuilder

get

Returns the retract_point Builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.WedmOperationBuilder.RoughPassesBuilder

get

Returns the rough_passes builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.CornerSmoothingType NXOpen.CAM.WedmOperationBuilder.Smoothing

getset

Returns or sets the smoothing

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.SmoothLeadInDistanceBuilder

get

Returns the smooth_lead_in_distance builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.SmoothLeadInTypes NXOpen.CAM.WedmOperationBuilder.SmoothLeadInOption

getset

Returns or sets the Smooth Leadin Flag

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.SmoothLeadOutDistanceBuilder

get

Returns the smooth_lead_out_distance builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.SmoothLeadOutTypes NXOpen.CAM.WedmOperationBuilder.SmoothLeadOutOption

getset

Returns or sets the Smooth Leadout Flag

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.WedmOperationBuilder.StopPointDistanceBuilder

get

Returns the stop_point_distance builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.StopPointFlagTypes NXOpen.CAM.WedmOperationBuilder.StopPointFlag

getset

Returns or sets the Stop Point Flag

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmOperationBuilder.StopPointTypes NXOpen.CAM.WedmOperationBuilder.StopPointType

getset

Returns or sets the Stop Point Type

Created in NX7.5.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmPointDefinitionBuilder NXOpen.CAM.WedmOperationBuilder.ThreadHolePointBuilder

get

Returns the thread_hole_point Builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmArcOutputTypeCiBuilder NXOpen.CAM.WedmOperationBuilder.WedmArcOutputTypeCiBuilder

get

Returns the wedm arc output type Builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.WedmStatusControlCiBuilder NXOpen.CAM.WedmOperationBuilder.WedmStatusControlCiBuilder

get

Returns the wedm status control ci Builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_WedmOperationBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation