Represents an avoidance start Builder More...

Inheritance diagram for NXOpen.CAM.TurnRoughFinishLocalReturnBuilder:

Public Types
enum	AdjustmentModeTypes { None, Range, Alignment }
	the adjustment mode options More...

enum	DwellUnitTypes { None, Seconds, Revolutions }
	the Dwell Unit type More...

enum	LimitTypes { DistanceOrTime, Percent }
	the local limit mode More...

enum	ModeTypes { None, Distance, Time, NumberOfPasses, NumberOfCuts, NumberOfLevels }
	The local return type options More...

enum	ReturnMoveModeTypes { None, Direct, RadialAxial, AxialRadial, ClearRadialDirect, ClearAxialDirect, ClearRadial, ClearAxial, RadialClearAxialDirect, RadialAxialRadial, RadialClearAxial, ClearRadialClearAxialDirect, ClearRadialAxialRadial, ClearRadialClearAxial, SameAsDeparture }
	the return move mode options More...

Public Member Functions
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes	GetLowerLimitType ()
	Get the lower limits mode More...

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes	GetUpperLimitType ()
	Get the upper limits mode More...

unsafe void	SetLowerLimitType (NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes lowerLimitModeValue)
	Set the lower limits mode More...

unsafe void	SetUpperLimitType (NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes upperLimitModeValue)
	Set the upper limits mode More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes	AdjustmentMode `[get, set]`
	Returns or sets the adjustment mode mode More...

unsafe double	Distance `[get, set]`
	Returns or sets the local distance value More...

unsafe double	Dwell `[get, set]`
	Returns or sets the Dwell Time or Revolutions More...

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes	DwellUnit `[get, set]`
	Returns or sets the Dwell Unit type More...

unsafe NXOpen.CAM.PostEventsCiBuilder	EndOfPathBuilder `[get]`
	Returns the end event builder More...

unsafe double	LowerLimit `[get, set]`
	Returns or sets the lower limit More...

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ModeTypes	Mode `[get, set]`
	Returns or sets the local return type More...

unsafe int	NumberOfCuts `[get, set]`
	Returns or sets the local number of cuts More...

unsafe int	NumberOfLevels `[get, set]`
	Returns or sets the local number of levels More...

unsafe int	NumberOfPasses `[get, set]`
	Returns or sets the local number of passes value More...

unsafe string	OperatorMessage `[get, set]`
	Returns or sets the Operator Message String More...

unsafe bool	OutputOperatorMessage `[get, set]`
	Returns or sets the output operator message option More...

unsafe bool	OutputOpskip `[get, set]`
	Returns or sets the output opskip option More...

unsafe bool	OutputOpstop `[get, set]`
	Returns or sets the output opstop option More...

unsafe bool	OutputStop `[get, set]`
	Returns or sets the output stop option More...

unsafe NXOpen.Point	Point `[get, set]`
	Returns or sets the local return point More...

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes	ReturnMoveMode `[get, set]`
	Returns or sets the adjustment mode mode More...

unsafe NXOpen.CAM.PostEventsCiBuilder	StartOfPathBuilder `[get]`
	Returns the start event builder More...

unsafe double	Time `[get, set]`
	Returns or sets the local time value More...

unsafe double	UpperLimit `[get, set]`
	Returns or sets the upper limit More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents an avoidance start Builder

Created in NX6.0.0

Member Enumeration Documentation

enum NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes

the adjustment mode options

Enumerator
None	Ajustment: None
Range	Ajustment: Range
Alignment	Ajustment: Alignment

enum NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes

the Dwell Unit type

Enumerator
None	None
Seconds	Seconds
Revolutions	Revolutions

enum NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes

the local limit mode

Enumerator
DistanceOrTime	mm,inch or sec
Percent	%

enum NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ModeTypes

The local return type options

Enumerator
None	Local Return: None
Distance	Local Return: Distance
Time	Local Return: Time
NumberOfPasses	Local Return: Number of Passes
NumberOfCuts	Local Return: Number of Cuts
NumberOfLevels	Local Return: Number of Levels

enum NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes

the return move mode options

Enumerator
None	Return Move: Nove
Direct	Return Move: Direct
RadialAxial	Return Move: Radial-Axial
AxialRadial	Return Move: Axial-Radial
ClearRadialDirect	Return Move: Clear Radial-Direct
ClearAxialDirect	Return Move: Clear Axial-Direct
ClearRadial	Return Move: Clear Radial
ClearAxial	Return Move: Clear Axial
RadialClearAxialDirect	Return Move: Radial-Clear Axial-Direct
RadialAxialRadial	Return Move: Radial-Axial-Radial
RadialClearAxial	Return Move: Radial-Clear Axial
ClearRadialClearAxialDirect	Return Move: Clear Radial-Clear Axial-Direct
ClearRadialAxialRadial	Return Move: Clear Radial-Axial-Radial
ClearRadialClearAxial	Return Move: Clear Radial-Clear Axial
SameAsDeparture	Return Move: Same as Departure.

Member Function Documentation

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.GetLowerLimitType ( )

inline

Get the lower limits mode

Created in NX6.0.0

License requirements: None.

Returns: the lower limits mode value

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.GetUpperLimitType ( )

inline

Get the upper limits mode

Created in NX6.0.0

License requirements: None.

Returns: the upper limits mode value

unsafe void NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.SetLowerLimitType ( NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes lowerLimitModeValue )

inline

Set the lower limits mode

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

lowerLimitModeValue the lower limits mode value

unsafe void NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.SetUpperLimitType ( NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes upperLimitModeValue )

inline

Set the upper limits mode

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

upperLimitModeValue the upper limits mode value

Property Documentation

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.AdjustmentMode

getset

Returns or sets the adjustment mode mode

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.Distance

getset

Returns or sets the local distance value

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.Dwell

getset

Returns or sets the Dwell Time or Revolutions

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.DwellUnit

getset

Returns or sets the Dwell Unit type

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.PostEventsCiBuilder NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.EndOfPathBuilder

get

Returns the end event builder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LowerLimit

getset

Returns or sets the lower limit

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ModeTypes NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.Mode

getset

Returns or sets the local return type

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.NumberOfCuts

getset

Returns or sets the local number of cuts

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.NumberOfLevels

getset

Returns or sets the local number of levels

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.NumberOfPasses

getset

Returns or sets the local number of passes value

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe string NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.OperatorMessage

getset

Returns or sets the Operator Message String

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.OutputOperatorMessage

getset

Returns or sets the output operator message option

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.OutputOpskip

getset

Returns or sets the output opskip option

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.OutputOpstop

getset

Returns or sets the output opstop option

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.OutputStop

getset

Returns or sets the output stop option

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Point NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.Point

getset

Returns or sets the local return point

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ReturnMoveMode

getset

Returns or sets the adjustment mode mode

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.PostEventsCiBuilder NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.StartOfPathBuilder

get

Returns the start event builder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.Time

getset

Returns or sets the local time value

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.UpperLimit

getset

Returns or sets the upper limit

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_TurnRoughFinishLocalReturnBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation