NXOpen.CAM.NormalToToolAxisMoveBuilder Class Reference

Represents the Move To Point Builder More...

Inheritance diagram for NXOpen.CAM.NormalToToolAxisMoveBuilder:

Public Types
enum	Orientation { AlongVector, TowardsPoint }
	the normal orientation More...
Public Types inherited from NXOpen.CAM.MoveBuilder
enum	Feed { Motion, Custom }
	the feed Type More...
enum	Motion {   Rapid = 1, Engage, Cut, Stepover,   Retract, Approach, Traversal, Departure,   Return, FirstCut, LastCut, Crossover }
	the motion Type More...

Properties
unsafe double	Angle [get, set]
	Returns or sets the angle More...
unsafe NXOpen.CAM.ExpressionDouble	AngleBuilder [get]
	Returns the angle builder More...
unsafe double	Distance [get, set]
	Returns or sets the distance More...
unsafe NXOpen.CAM.ExpressionDouble	DistanceBuilder [get]
	Returns the distance builder More...
unsafe NXOpen.CAM.ReferencePoint	EndPointBuilder [get]
	Returns the end point builder More...
unsafe NXOpen.CAM.NormalToToolAxisMoveBuilder.Orientation	MoveType [get, set]
	Returns or sets the normal type More...
unsafe NXOpen.Point	Point [get, set]
	Returns or sets the point in normal direction More...
unsafe NXOpen.CAM.RoundPointBuilder	RoundPoint [get]
	Returns the round point builder More...
unsafe NXOpen.Direction	Vector [get, set]
	Returns or sets the vector More...
unsafe NXOpen.CAM.ReferenceVector	VectorBuilder [get]
	Returns the vector builder More...
Properties inherited from NXOpen.CAM.MoveBuilder
unsafe double	FeedRate [get, set]
	Returns or sets the feed rate More...
unsafe NXOpen.CAM.MoveBuilder.Feed	FeedType [get, set]
	Returns or sets the feed type More...
unsafe NXOpen.CAM.FeedRateUnit	FeedUnit [get, set]
	Returns or sets the feed unit More...
unsafe NXOpen.CAM.MoveBuilder.Motion	MotionType [get, set]
	Returns or sets the motion type More...
unsafe int	NumberOfUserParameters [get]
	Returns the number of user parameters More...
unsafe bool	ProtectedMove [get, set]
	Returns or sets the protected move status More...
unsafe string	SubopLabel [get, set]
	Returns or sets the subop label More...
Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder [get]
	Returns the preview builder subobject. More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.MoveBuilder
unsafe NXOpen.CAM.UdeParameter	GetUserParameter (string parameterName)
	Returns the custom parameter with the given name. More...
unsafe NXOpen.CAM.UdeParameter	GetUserParameter (int index)
	Returns the parameter at the input index. More...
unsafe void	SetParent (NXOpen.CAM.CAMObject parent)
	Set parent More...
unsafe void	SetSibling (NXOpen.CAM.CAMObject sibling)
	Set sibling More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents the Move To Point Builder

To create a new instance of this class, use NXOpen.CAM.MoveCollection.CreateNormalToToolAxisMoveBuilder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.NormalToToolAxisMoveBuilder.Orientation

the normal orientation

Enumerator
AlongVector	Along Vector
TowardsPoint	Towards Point

Property Documentation

unsafe double NXOpen.CAM.NormalToToolAxisMoveBuilder.Angle

getset

Returns or sets the angle

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ExpressionDouble instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ExpressionDouble NXOpen.CAM.NormalToToolAxisMoveBuilder.AngleBuilder

get

Returns the angle builder

Created in NX12.0.1

License requirements: None.

unsafe double NXOpen.CAM.NormalToToolAxisMoveBuilder.Distance

getset

Returns or sets the distance

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ExpressionDouble instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ExpressionDouble NXOpen.CAM.NormalToToolAxisMoveBuilder.DistanceBuilder

get

Returns the distance builder

Created in NX12.0.1

License requirements: None.

unsafe NXOpen.CAM.ReferencePoint NXOpen.CAM.NormalToToolAxisMoveBuilder.EndPointBuilder

get

Returns the end point builder

Created in NX12.0.1

License requirements: None.

unsafe NXOpen.CAM.NormalToToolAxisMoveBuilder.Orientation NXOpen.CAM.NormalToToolAxisMoveBuilder.MoveType

getset

Returns or sets the normal type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.Point NXOpen.CAM.NormalToToolAxisMoveBuilder.Point

getset

Returns or sets the point in normal direction

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ReferencePoint instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.RoundPointBuilder NXOpen.CAM.NormalToToolAxisMoveBuilder.RoundPoint

get

Returns the round point builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.Direction NXOpen.CAM.NormalToToolAxisMoveBuilder.Vector

getset

Returns or sets the vector

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ReferenceVector instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ReferenceVector NXOpen.CAM.NormalToToolAxisMoveBuilder.VectorBuilder

get

Returns the vector builder

Created in NX12.0.1

License requirements: None.

---

The documentation for this class was generated from the following file:

• CAM_NormalToToolAxisMoveBuilder.cs