NXOpen.CAM.MillingToolBuilder Class Reference

Represents a MillingTool Builder More...

Inheritance diagram for NXOpen.CAM.MillingToolBuilder:

Public Types
enum	ToolDirectionTypes { None, Clw, Cclw }
	Available types for tool direction milling tool More...

Properties
unsafe bool	CoolantThrough [get, set]
	Returns or sets the coolant through parameter More...
unsafe NXOpen.CAM.InheritableToolDepBuilder	HelicalDiameter [get]
	Returns the helical diameter More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	HelicalRampAngle [get]
	Returns the ramp angle More...
unsafe NXOpen.CAM.HolderSectionBuilder	HolderSectionBuilder [get]
	Returns the holder sections builder More...
unsafe NXOpen.CAM.InheritableToolDepBuilder	MaxCutWidth [get]
	Returns the max cut width More...
unsafe NXOpen.CAM.MillingTrackpointBuilder	MillingTrackpointBuilder [get]
	Returns the mill trackpoint builder More...
unsafe NXOpen.CAM.InheritableToolDepBuilder	MinRampLength [get]
	Returns the min ramp length More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TaperedShankDiameterBuilder [get]
	Returns the tapered shank diameter More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TaperedShankLengthBuilder [get]
	Returns the tapered shank length More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TaperedShankTaperLengthBuilder [get]
	Returns the tapered shank taper length More...
unsafe NXOpen.CAM.InheritableIntBuilder	TlAdjRegBuilder [get]
	Returns the Adjust Register More...
unsafe int	TlCutcomReg [get, set]
	Returns or sets the Cutcom Register More...
unsafe NXOpen.CAM.InheritableIntBuilder	TlCutcomRegBuilder [get]
	Returns the Cutcom Register Builder More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlDiameterBuilder [get]
	Returns the Tool Diameter builder (inheritable double) More...
unsafe NXOpen.CAM.MillingToolBuilder.ToolDirectionTypes	TlDirection [get, set]
	Returns or sets the tool direction More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlFluteLnBuilder [get]
	Returns the flute length More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlHeightBuilder [get]
	Returns the length More...
unsafe string	TlHolderDescription [get, set]
	Returns or sets the Holder Description More...
unsafe string	TlHolderLibref [get, set]
	Returns or sets the Holder Library Reference More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlLowCorRadBuilder [get]
	Returns the low corner radius More...
unsafe NXOpen.CAM.InheritableIntBuilder	TlNumFlutesBuilder [get]
	Returns the Number of Flutes builder (inheritable integer) More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlShankDiaBuilder [get]
	Returns the Shank Diameter builder (inheritable double) More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlTaperAngBuilder [get]
	Returns the Taper Angle builder (inheritable double) More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlUpCorRadBuilder [get]
	Returns the up corner radius More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlZMountBuilder [get]
	Returns the Z Mount builder (inheritable double) More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TlZOffsetBuilder [get]
	Returns the Z Offset builder (inheritable double) More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	ToolHelixAngleBuilder [get]
	Returns the tool helix angle builder More...
unsafe bool	UseTaperedShank [get, set]
	Returns or sets the use tapered shank More...
Properties inherited from NXOpen.CAM.ToolBuilder
unsafe string	ChannelName [get, set]
	Returns or sets the channel's name More...
unsafe NXOpen.CAM.CutterExport	CutterExportBuilder [get]
	Returns the cutter export builder More...
unsafe string	HolderDescription [get, set]
	Returns or sets the holder description More...
unsafe string	HolderLibraryReference [get, set]
	Returns or sets the holder libref More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	IncrementalTurretRotationBuilder [get]
	Returns the incremental turret rotation builder More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	IndexNotchBuilder [get]
	Returns the index notch builder More...
unsafe NXOpen.CAM.Ude	LibraryParametersBuilder [get]
	Returns the Library Data Object More...
unsafe string	TlCtlgNum [get, set]
	Returns or sets the Catalog Number More...
unsafe string	TlDescription [get, set]
	Returns or sets the Cutter Description More...
unsafe NXOpen.CAM.InheritableIntBuilder	TlHolderNumberBuilder [get]
	Returns the Holder Number More...
unsafe string	TlLibref [get, set]
	Returns or sets the Cutter Libref More...
unsafe bool	TlManualToolChange [get, set]
	Returns or sets the Manual Tool Change More...
unsafe NXOpen.CAM.InheritableIntBuilder	TlNumberBuilder [get]
	Returns the Tool Number More...
unsafe string	TlText [get, set]
	Returns or sets the tool text More...
Properties inherited from NXOpen.CAM.NCGroupBuilder
unsafe string	Description [get, set]
	Returns or sets the description More...
unsafe NXOpen.CAM.UdeSet	EndUdeSet [get]
	Returns the end ude set More...
unsafe NXOpen.CAM.UdeSet	StartUdeSet [get]
	Returns the start ude set More...
Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent [get]
	Returns the cycle event More...
unsafe NXOpen.CAM.Cycle	CycleTable [get]
	Returns the cycle More...
unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod [get, set]
	Returns or sets the optim method More...
unsafe NXOpen.CAM.NCGroup	TargetPocket [get, set]
	Returns or sets the target pocket More...
Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder [get]
	Returns the preview builder subobject. More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.ToolBuilder
unsafe string	GetMaterial ()
	Get tool material More...
unsafe void	GetMaterialData (out string libRef, out string name, out string description, out string code)
	Get material data More...
unsafe void	SetMaterial (string libRef)
	Set tool material More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a MillingTool Builder

This is an abstract class, and cannot be instantiated.

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.MillingToolBuilder.ToolDirectionTypes

Available types for tool direction milling tool

Enumerator
None	None
Clw	CLW
Cclw	CCLW

Property Documentation

unsafe bool NXOpen.CAM.MillingToolBuilder.CoolantThrough

getset

Returns or sets the coolant through parameter

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.MillingToolBuilder.HelicalDiameter

get

Returns the helical diameter

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.HelicalRampAngle

get

Returns the ramp angle

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.HolderSectionBuilder NXOpen.CAM.MillingToolBuilder.HolderSectionBuilder

get

Returns the holder sections builder

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.MillingToolBuilder.MaxCutWidth

get

Returns the max cut width

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.MillingTrackpointBuilder NXOpen.CAM.MillingToolBuilder.MillingTrackpointBuilder

get

Returns the mill trackpoint builder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.MillingToolBuilder.MinRampLength

get

Returns the min ramp length

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TaperedShankDiameterBuilder

get

Returns the tapered shank diameter

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TaperedShankLengthBuilder

get

Returns the tapered shank length

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TaperedShankTaperLengthBuilder

get

Returns the tapered shank taper length

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.MillingToolBuilder.TlAdjRegBuilder

get

Returns the Adjust Register

Created in NX5.0.0

License requirements: None.

unsafe int NXOpen.CAM.MillingToolBuilder.TlCutcomReg

getset

Returns or sets the Cutcom Register

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.MillingToolBuilder.TlCutcomRegBuilder

get

Returns the Cutcom Register Builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlDiameterBuilder

get

Returns the Tool Diameter builder (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.MillingToolBuilder.ToolDirectionTypes NXOpen.CAM.MillingToolBuilder.TlDirection

getset

Returns or sets the tool direction

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlFluteLnBuilder

get

Returns the flute length

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlHeightBuilder

get

Returns the length

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe string NXOpen.CAM.MillingToolBuilder.TlHolderDescription

getset

Returns or sets the Holder Description

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe string NXOpen.CAM.MillingToolBuilder.TlHolderLibref

getset

Returns or sets the Holder Library Reference

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlLowCorRadBuilder

get

Returns the low corner radius

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.MillingToolBuilder.TlNumFlutesBuilder

get

Returns the Number of Flutes builder (inheritable integer)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlShankDiaBuilder

get

Returns the Shank Diameter builder (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlTaperAngBuilder

get

Returns the Taper Angle builder (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlUpCorRadBuilder

get

Returns the up corner radius

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlZMountBuilder

get

Returns the Z Mount builder (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.TlZOffsetBuilder

get

Returns the Z Offset builder (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.MillingToolBuilder.ToolHelixAngleBuilder

get

Returns the tool helix angle builder

Created in NX1899.0.0

License requirements: None.

unsafe bool NXOpen.CAM.MillingToolBuilder.UseTaperedShank

getset

Returns or sets the use tapered shank

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

---

The documentation for this class was generated from the following file:

• CAM_MillingToolBuilder.cs