Represents a CMM Inspection Curve Feature builder More...

Inheritance diagram for NXOpen.CAM.InspectionCurveFeatureBuilder:

Public Types
enum	PointDataDefinitionType { None, PointSet, IndividualPoints }
	The method used to define point data More...

enum	StartEndModeType { Percentage, Distance }
	the method used to define the start and end points More...

Public Types inherited from NXOpen.CAM.OperationBuilder
enum	HoleAxisTypes { Vector, Rule, RuleIfNoVector }
	Available types for Hole Axis Type in feature milling and hole making More...

enum	HoleDepthTypes { Point, Rule }
	Available types for Hole Depth Type in feature milling and hole making More...

enum	OptimizationBasedOnTypes { Dist, Orient }
	Available types for optimization based on in operation More...

enum	OptimizationDistanceTypes { Direct, Transition }
	Available types for optimization distance method in operation More...

enum	OptimizationLevelTypes { Standard, Advanced }
	Available types for optimization level in operation More...

Public Types inherited from NXOpen.CAM.ParamBuilder
enum	OptimizationTypes { None, MinimizeTravel, Band }
	Available types for Optimization Method in operation More...

Public Member Functions
unsafe void	ErasePointDefinitionDisplay ()
	Erases display of point definition data More...

unsafe void	PreviewPointData (bool showExisting)
	Creates preview of point definition data More...

unsafe void	ReverseFeatureNormal ()
	Reverses the feature normal More...

unsafe void	ReverseOffsetDirection ()
	Reverses the offset direction More...

unsafe void	SetSelectedSurfaces (NXOpen.Face[] selectedSurfaces)
	Sets the curve underlying selected surfaces More...

unsafe void	UpdateOffset ()
	Updates curve inspection feature characteristic parameters based on offset distance More...

unsafe void	UpdateParams ()
	Updates the feature parameters More...

Public Member Functions inherited from NXOpen.CAM.OperationBuilder
unsafe double[]	GetHoleAxisValues ()
	Get the Hole Axis values More...

unsafe void	SetHoleAxisValues (double[] holeAxis)
	Set the Hole Axis values More...

Public Member Functions inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.TaggedObject	GetCustomizableItemBuilder (string name)
	Returns the customizable item builder for the given customizable item name More...

unsafe string[]	GetCustomizableItemNames ()
	Returns the names for all customizable item ids More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Direction	ApproachDirection `[get, set]`
	Returns or sets the approach direction More...

unsafe double	CurvatureFactor `[get, set]`
	Returns or sets the curvature factor More...

unsafe NXOpen.CAM.InspectionFeatureDataFilterBuilder	DataFilterBuilder `[get]`
	Returns the Data Filter Builder More...

unsafe double	EndDistance `[get, set]`
	Returns or sets the end distance More...

unsafe double	EndPercentage `[get, set]`
	Returns or sets the end percentage More...

unsafe bool	IsPointDefinitionChanged `[get, set]`
	Returns or sets the point data definition changed flag More...

unsafe double	MaximumSpacing `[get, set]`
	Returns or sets the maximum spacing More...

unsafe int	MinimumNumberOfPoints `[get, set]`
	Returns or sets the minimum number of points More...

unsafe double	MinimumSpacing `[get, set]`
	Returns or sets the minimum spacing More...

unsafe string	Name `[get, set]`
	Returns or sets the name More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	OffsetDistance `[get]`
	Returns the offset distance More...

unsafe NXOpen.CAM.InspectionCurveFeatureBuilder.PointDataDefinitionType	PointDataDefinition `[get, set]`
	Returns or sets the point data definition More...

unsafe NXOpen.SelectPointList	PointSelector `[get]`
	Returns the user specified point selector More...

unsafe NXOpen.SelectNXObjectList	SelectedCurves `[get]`
	Returns the selected curves More...

unsafe NXOpen.SelectNXObjectList	SelectedSurfaces `[get]`
	Returns the underlying surfaces selector. More...

unsafe double	StartDistance `[get, set]`
	Returns or sets the start distance More...

unsafe NXOpen.CAM.InspectionCurveFeatureBuilder.StartEndModeType	StartEndMode `[get, set]`
	Returns or sets the start end mode More...

unsafe double	StartPercentage `[get, set]`
	Returns or sets the start percentage More...

Properties inherited from NXOpen.CAM.OperationBuilder
unsafe string	ChannelName `[get, set]`
	Returns or sets the channel's name More...

unsafe string	Description `[get, set]`
	Returns or sets the description More...

unsafe NXOpen.CAM.PostEventsCiBuilder	EndOfPath `[get]`
	Returns the end event builder More...

unsafe NXOpen.CAM.UdeSet	EndUdeSet `[get]`
	Returns the end ude set More...

unsafe NXOpen.CAM.GeometryCiBuilder	Geometry `[get]`
	Returns the geometry builder More...

unsafe bool	GougeChecking `[get, set]`
	Returns or sets the gouge checking flag More...

unsafe NXOpen.CAM.OperationBuilder.HoleAxisTypes	HoleAxisType `[get, set]`
	Returns or sets the Hole Axis Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	HoleDepth `[get]`
	Returns the max depth distance builder More...

unsafe NXOpen.CAM.OperationBuilder.HoleDepthTypes	HoleDepthType `[get, set]`
	Returns or sets the Hole Depth Type More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutAndLayer `[get]`
	Returns the Layer and Layout More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutputBuilder `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Notes	Notes `[get]`
	Returns the notes builder More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationBasedOnTypes	OptimizationBasedOn `[get, set]`
	Returns or sets the optimization based on in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationDistanceTypes	OptimizationDistanceMethod `[get, set]`
	Returns or sets the optimization distance method in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationLevelTypes	OptimizationLevel `[get, set]`
	Returns or sets the optimization level in operation More...

unsafe NXOpen.CAM.OperationDisplayOptionsBuilder	PathDisplayOptions `[get]`
	Returns the path display options builder More...

unsafe string	PostToolPathExit `[get, set]`
	Returns or sets the environment variable that points to the post tool path generation library which has the exit More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistance `[get]`
	Returns the Retract Distance builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistanceOnToolAxisChange `[get]`
	Returns the Retract Distance on Tool Axis Change builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SafeClearance `[get]`
	Returns the safe clearance builder More...

unsafe bool	SelectToolFlag `[get, set]`
	Returns or sets the user selected tool More...

unsafe NXOpen.CAM.PostEventsCiBuilder	StartOfPath `[get]`
	Returns the start event builder More...

unsafe NXOpen.CAM.UdeSet	StartUdeSet `[get]`
	Returns the start ude set More...

unsafe NXOpen.CAM.ToolChangeCiBuilder	ToolChangeSetting `[get]`
	Returns the tool change builder More...

unsafe NXOpen.CAM.ToolPathEditorBuilder	ToolPathEditor `[get]`
	Returns the Tool Path Editor Builder More...

unsafe NXOpen.CAM.ToolPathSplitParametersBuilder	ToolPathSplitParametersBuilder `[get]`
	Returns the tool path split Parameters More...

Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent `[get]`
	Returns the cycle event More...

unsafe NXOpen.CAM.Cycle	CycleTable `[get]`
	Returns the cycle More...

unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod `[get, set]`
	Returns or sets the optim method More...

unsafe NXOpen.CAM.NCGroup	TargetPocket `[get, set]`
	Returns or sets the target pocket More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a CMM Inspection Curve Feature builder

To create a new instance of this class, use NXOpen.CAM.InspectionOperationCollection.CreateInspectionCurveFeatureBuilder

Created in NX7.0.0

Member Enumeration Documentation

enum NXOpen.CAM.InspectionCurveFeatureBuilder.PointDataDefinitionType

The method used to define point data

Enumerator
None	No point data is defined
PointSet	A set of points are defined using parameters
IndividualPoints	Individual points are defined

enum NXOpen.CAM.InspectionCurveFeatureBuilder.StartEndModeType

the method used to define the start and end points

Enumerator
Percentage	Percent
Distance	Distance

Member Function Documentation

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.ErasePointDefinitionDisplay ( )

inline

Erases display of point definition data

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.PreviewPointData ( bool showExisting )

inline

Creates preview of point definition data

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

Parameters

showExisting

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.ReverseFeatureNormal ( )

inline

Reverses the feature normal

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.ReverseOffsetDirection ( )

inline

Reverses the offset direction

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.SetSelectedSurfaces ( NXOpen.Face[] selectedSurfaces )

inline

Sets the curve underlying selected surfaces

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

Parameters

selectedSurfaces Array of selected surfaces

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.UpdateOffset ( )

inline

Updates curve inspection feature characteristic parameters based on offset distance

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

unsafe void NXOpen.CAM.InspectionCurveFeatureBuilder.UpdateParams ( )

inline

Updates the feature parameters

Created in NX9.0.0

License requirements: insp_programming ("INSPECTION PROGRAMMING")

Property Documentation

unsafe NXOpen.Direction NXOpen.CAM.InspectionCurveFeatureBuilder.ApproachDirection

getset

Returns or sets the approach direction

Created in NX7.0.0

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.CurvatureFactor

getset

Returns or sets the curvature factor

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe NXOpen.CAM.InspectionFeatureDataFilterBuilder NXOpen.CAM.InspectionCurveFeatureBuilder.DataFilterBuilder

get

Returns the Data Filter Builder

Created in NX1880.0.0

License requirements: None.

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.EndDistance

getset

Returns or sets the end distance

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.EndPercentage

getset

Returns or sets the end percentage

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe bool NXOpen.CAM.InspectionCurveFeatureBuilder.IsPointDefinitionChanged

getset

Returns or sets the point data definition changed flag

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.MaximumSpacing

getset

Returns or sets the maximum spacing

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe int NXOpen.CAM.InspectionCurveFeatureBuilder.MinimumNumberOfPoints

getset

Returns or sets the minimum number of points

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.MinimumSpacing

getset

Returns or sets the minimum spacing

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe string NXOpen.CAM.InspectionCurveFeatureBuilder.Name

getset

Returns or sets the name

Created in NX7.0.0

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.InspectionCurveFeatureBuilder.OffsetDistance

get

Returns the offset distance

Created in NX9.0.0

License requirements: None.

unsafe NXOpen.CAM.InspectionCurveFeatureBuilder.PointDataDefinitionType NXOpen.CAM.InspectionCurveFeatureBuilder.PointDataDefinition

getset

Returns or sets the point data definition

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe NXOpen.SelectPointList NXOpen.CAM.InspectionCurveFeatureBuilder.PointSelector

get

Returns the user specified point selector

Created in NX8.5.1

License requirements: None.

unsafe NXOpen.SelectNXObjectList NXOpen.CAM.InspectionCurveFeatureBuilder.SelectedCurves

get

Returns the selected curves

Created in NX7.0.0

License requirements: None.

unsafe NXOpen.SelectNXObjectList NXOpen.CAM.InspectionCurveFeatureBuilder.SelectedSurfaces

get

Returns the underlying surfaces selector.

Created in NX7.0.0

License requirements: None.

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.StartDistance

getset

Returns or sets the start distance

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe NXOpen.CAM.InspectionCurveFeatureBuilder.StartEndModeType NXOpen.CAM.InspectionCurveFeatureBuilder.StartEndMode

getset

Returns or sets the start end mode

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

unsafe double NXOpen.CAM.InspectionCurveFeatureBuilder.StartPercentage

getset

Returns or sets the start percentage

Created in NX8.5.1

License requirements to get this property: None.

License requirements to set this property: insp_programming ("INSPECTION PROGRAMMING")

The documentation for this class was generated from the following file:

CAM_InspectionCurveFeatureBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation