NXOpen.CAM.FollowCurveMoveBuilder Class Reference

Represents the Follow Curve Move Builder More...

Inheritance diagram for NXOpen.CAM.FollowCurveMoveBuilder:

Properties
unsafe NXOpen.Point	EndPoint [get, set]
	Returns or sets the end location More...
unsafe NXOpen.Direction	EndToolAxis [get, set]
	Returns or sets the end tool axis More...
unsafe NXOpen.Section	Geometry [get, set]
	Returns or sets the geometry selection More...
Properties inherited from NXOpen.CAM.FollowGeometryMoveBuilder
unsafe NXOpen.CAM.InheritableToolDepBuilder	EndExtension [get, set]
	Returns or sets the end extension More...
unsafe NXOpen.CAM.InheritableToolDepBuilder	StartExtension [get, set]
	Returns or sets the start extension More...
unsafe NXOpen.Point	StartPoint [get, set]
	Returns or sets the start location More...
unsafe NXOpen.Direction	StartToolAxis [get, set]
	Returns or sets the start tool axis More...
Properties inherited from NXOpen.CAM.MoveBuilder
unsafe double	FeedRate [get, set]
	Returns or sets the feed rate More...
unsafe NXOpen.CAM.MoveBuilder.Feed	FeedType [get, set]
	Returns or sets the feed type More...
unsafe NXOpen.CAM.FeedRateUnit	FeedUnit [get, set]
	Returns or sets the feed unit More...
unsafe NXOpen.CAM.MoveBuilder.Motion	MotionType [get, set]
	Returns or sets the motion type More...
unsafe int	NumberOfUserParameters [get]
	Returns the number of user parameters More...
unsafe bool	ProtectedMove [get, set]
	Returns or sets the protected move status More...
unsafe string	SubopLabel [get, set]
	Returns or sets the subop label More...
Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder [get]
	Returns the preview builder subobject. More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Types inherited from NXOpen.CAM.MoveBuilder
enum	Feed { Motion, Custom }
	the feed Type More...
enum	Motion {   Rapid = 1, Engage, Cut, Stepover,   Retract, Approach, Traversal, Departure,   Return, FirstCut, LastCut, Crossover }
	the motion Type More...
Public Member Functions inherited from NXOpen.CAM.MoveBuilder
unsafe NXOpen.CAM.UdeParameter	GetUserParameter (string parameterName)
	Returns the custom parameter with the given name. More...
unsafe NXOpen.CAM.UdeParameter	GetUserParameter (int index)
	Returns the parameter at the input index. More...
unsafe void	SetParent (NXOpen.CAM.CAMObject parent)
	Set parent More...
unsafe void	SetSibling (NXOpen.CAM.CAMObject sibling)
	Set sibling More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents the Follow Curve Move Builder

To create a new instance of this class, use NXOpen.CAM.MoveCollection.CreateFollowCurveMoveBuilder

Default values.

Property	Value
FeedRate	0.0
FeedType	Motion
FeedUnit	None
MotionType	Cut
ProtectedMove	true

Created in NX8.0.0

Property Documentation

unsafe NXOpen.Point NXOpen.CAM.FollowCurveMoveBuilder.EndPoint

getset

Returns or sets the end location

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Direction NXOpen.CAM.FollowCurveMoveBuilder.EndToolAxis

getset

Returns or sets the end tool axis

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Section NXOpen.CAM.FollowCurveMoveBuilder.Geometry

getset

Returns or sets the geometry selection

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

---

The documentation for this class was generated from the following file:

• CAM_FollowCurveMoveBuilder.cs