NXOpen.CAM.FlowCutSteepContainment Class Reference

Represents a Steep Containment Builder More...

Inheritance diagram for NXOpen.CAM.FlowCutSteepContainment:

Public Types
enum	CutDirectionTypes { Mixed, Climb, Conventional }
	Available types for Cut Direction in Flow Cut More...
enum	CutLevelTypes { Constant, Optimized }
	cut level types More...
enum	PatternDirectionTypes { Outward, Inward }
	Available types for Pattern Direction in Flow Cut More...
enum	SteepCutDirectionTypes { Mixed, HighToLow, LowToHigh }
	Available types for Steep Cut Direct in Flow Cut More...

Properties
unsafe bool	AddCenterPasses [get, set]
	Returns or sets the add center passes flag More...
unsafe bool	CutBetweenLevels [get, set]
	Returns or sets the cut between levels More...
unsafe NXOpen.CAM.FlowCutSteepContainment.CutLevelTypes	CutLevelType [get, set]
	Returns or sets the cut level type More...
unsafe NXOpen.CAM.CutPatternBuilder	CutPattern [get]
	Returns the cut pattern builder More...
unsafe NXOpen.CAM.StepoverBuilder	DepthPerCut [get]
	Returns the builder of flow cut depth per cut More...
unsafe NXOpen.CAM.FlowCutSteepContainment.CutDirectionTypes	FlowCutDirection [get, set]
	Returns or sets the Cut Direction More...
unsafe NXOpen.CAM.InheritableIntBuilder	NumberOfStepoversPerSide [get]
	Returns the number of stepovers per side builder (inheritable int) More...
unsafe NXOpen.CAM.FlowCutSteepContainment.PatternDirectionTypes	PatternDirection [get, set]
	Returns or sets the pattern direction More...
unsafe NXOpen.CAM.Sequence	Sequence [get]
	Returns the Sequence More...
unsafe NXOpen.CAM.FlowCutSteepContainment.SteepCutDirectionTypes	SteepCutDirection [get, set]
	Returns or sets the Steep Cut Direct More...
unsafe NXOpen.CAM.StepoverBuilder	Stepover [get]
	Returns the builder of flow cut stepover More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...
void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...
override string	ToString ()
	Returns a String that represents the current Object. More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Steep Containment Builder

Created in NX7.5.0

Member Enumeration Documentation

enum NXOpen.CAM.FlowCutSteepContainment.CutDirectionTypes

Available types for Cut Direction in Flow Cut

Enumerator
Mixed	Mixed
Climb	Climb
Conventional	Conventional

enum NXOpen.CAM.FlowCutSteepContainment.CutLevelTypes

cut level types

Enumerator
Constant	Constant
Optimized	Optimized

enum NXOpen.CAM.FlowCutSteepContainment.PatternDirectionTypes

Available types for Pattern Direction in Flow Cut

Enumerator
Outward	Outward
Inward	Inward

enum NXOpen.CAM.FlowCutSteepContainment.SteepCutDirectionTypes

Available types for Steep Cut Direct in Flow Cut

Enumerator
Mixed	Mixed
HighToLow	High to Low
LowToHigh	Low to High

Property Documentation

unsafe bool NXOpen.CAM.FlowCutSteepContainment.AddCenterPasses

getset

Returns or sets the add center passes flag

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: None.

unsafe bool NXOpen.CAM.FlowCutSteepContainment.CutBetweenLevels

getset

Returns or sets the cut between levels

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.FlowCutSteepContainment.CutLevelTypes NXOpen.CAM.FlowCutSteepContainment.CutLevelType

getset

Returns or sets the cut level type

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.CutPatternBuilder NXOpen.CAM.FlowCutSteepContainment.CutPattern

get

Returns the cut pattern builder

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.StepoverBuilder NXOpen.CAM.FlowCutSteepContainment.DepthPerCut

get

Returns the builder of flow cut depth per cut

Created in NX8.5.0

License requirements: None.

unsafe NXOpen.CAM.FlowCutSteepContainment.CutDirectionTypes NXOpen.CAM.FlowCutSteepContainment.FlowCutDirection

getset

Returns or sets the Cut Direction

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.FlowCutSteepContainment.NumberOfStepoversPerSide

get

Returns the number of stepovers per side builder (inheritable int)

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.FlowCutSteepContainment.PatternDirectionTypes NXOpen.CAM.FlowCutSteepContainment.PatternDirection

getset

Returns or sets the pattern direction

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Sequence NXOpen.CAM.FlowCutSteepContainment.Sequence

get

Returns the Sequence

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.FlowCutSteepContainment.SteepCutDirectionTypes NXOpen.CAM.FlowCutSteepContainment.SteepCutDirection

getset

Returns or sets the Steep Cut Direct

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.StepoverBuilder NXOpen.CAM.FlowCutSteepContainment.Stepover

get

Returns the builder of flow cut stepover

Created in NX7.5.0

License requirements: None.

---

The documentation for this class was generated from the following file:

• CAM_FlowCutSteepContainment.cs