Represents the Circular Move To Point Builder More...

Inheritance diagram for NXOpen.CAM.CircularAboutAxisMoveBuilder:

Public Types
enum	AxisType { Tool, Vector }
	the axis type More...

enum	EndType { Angle, Point }
	the motion end type More...

enum	ExtensionType { Angle, Distance }
	the extension type More...

Public Types inherited from NXOpen.CAM.MoveBuilder
enum	Feed { Motion, Custom }
	the feed Type More...

enum	Motion { Rapid = 1, Engage, Cut, Stepover, Retract, Approach, Traversal, Departure, Return, FirstCut, LastCut, Crossover }
	the motion Type More...

Properties
unsafe NXOpen.Direction	ArcAxis `[get, set]`
	Returns or sets the arc axis More...

unsafe NXOpen.CAM.CircularAboutAxisMoveBuilder.AxisType	ArcAxisType `[get, set]`
	Returns or sets the axis type More...

unsafe NXOpen.CAM.ReferenceVector	ArcAxisVectorBuilder `[get]`
	Returns the arc axis vector builder More...

unsafe NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtensionType	ArcExtendMethod `[get, set]`
	Returns or sets the arc extension type More...

unsafe NXOpen.Point	CenterPoint `[get, set]`
	Returns or sets the center More...

unsafe NXOpen.CAM.ReferencePoint	CenterPointBuilder `[get]`
	Returns the center point builder More...

unsafe NXOpen.Point	EndPoint `[get, set]`
	Returns or sets the arc end point More...

unsafe NXOpen.CAM.ReferencePoint	EndPointBuilder `[get]`
	Returns the end point builder More...

unsafe double	ExtendAngle `[get, set]`
	Returns or sets the extend angle More...

unsafe NXOpen.CAM.ExpressionDouble	ExtendAngleBuilder `[get]`
	Returns the extend angle builder More...

unsafe double	ExtendDistance `[get, set]`
	Returns or sets the extend distance More...

unsafe NXOpen.CAM.ExpressionDouble	ExtendDistanceBuilder `[get]`
	Returns the extend distance builder More...

unsafe NXOpen.CAM.CircularAboutAxisMoveBuilder.EndType	MotionEndType `[get, set]`
	Returns or sets the arc end type More...

unsafe double	SweepAngle `[get, set]`
	Returns or sets the sweep angle More...

unsafe NXOpen.CAM.ExpressionDouble	SweepAngleBuilder `[get]`
	Returns the sweep angle builder More...

Properties inherited from NXOpen.CAM.MoveBuilder
unsafe double	FeedRate `[get, set]`
	Returns or sets the feed rate More...

unsafe NXOpen.CAM.MoveBuilder.Feed	FeedType `[get, set]`
	Returns or sets the feed type More...

unsafe NXOpen.CAM.FeedRateUnit	FeedUnit `[get, set]`
	Returns or sets the feed unit More...

unsafe NXOpen.CAM.MoveBuilder.Motion	MotionType `[get, set]`
	Returns or sets the motion type More...

unsafe int	NumberOfUserParameters `[get]`
	Returns the number of user parameters More...

unsafe bool	ProtectedMove `[get, set]`
	Returns or sets the protected move status More...

unsafe string	SubopLabel `[get, set]`
	Returns or sets the subop label More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.MoveBuilder
unsafe NXOpen.CAM.UdeParameter	GetUserParameter (string parameterName)
	Returns the custom parameter with the given name. More...

unsafe NXOpen.CAM.UdeParameter	GetUserParameter (int index)
	Returns the parameter at the input index. More...

unsafe void	SetParent (NXOpen.CAM.CAMObject parent)
	Set parent More...

unsafe void	SetSibling (NXOpen.CAM.CAMObject sibling)
	Set sibling More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents the Circular Move To Point Builder

To create a new instance of this class, use NXOpen.CAM.MoveCollection.CreateCircularAboutAxisMoveBuilder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.CircularAboutAxisMoveBuilder.AxisType

the axis type

Enumerator
Tool	Tool Axis
Vector	Vector

enum NXOpen.CAM.CircularAboutAxisMoveBuilder.EndType

the motion end type

Enumerator
Angle	Angle
Point	Point

enum NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtensionType

the extension type

Enumerator
Angle	Angle
Distance	Distance

Property Documentation

unsafe NXOpen.Direction NXOpen.CAM.CircularAboutAxisMoveBuilder.ArcAxis

getset

Returns or sets the arc axis

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ReferenceVector instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.CircularAboutAxisMoveBuilder.AxisType NXOpen.CAM.CircularAboutAxisMoveBuilder.ArcAxisType

getset

Returns or sets the axis type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ReferenceVector NXOpen.CAM.CircularAboutAxisMoveBuilder.ArcAxisVectorBuilder

get

Returns the arc axis vector builder

Created in NX12.0.1

License requirements: None.

unsafe NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtensionType NXOpen.CAM.CircularAboutAxisMoveBuilder.ArcExtendMethod

getset

Returns or sets the arc extension type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.Point NXOpen.CAM.CircularAboutAxisMoveBuilder.CenterPoint

getset

Returns or sets the center

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ReferencePoint instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ReferencePoint NXOpen.CAM.CircularAboutAxisMoveBuilder.CenterPointBuilder

get

Returns the center point builder

Created in NX12.0.1

License requirements: None.

unsafe NXOpen.Point NXOpen.CAM.CircularAboutAxisMoveBuilder.EndPoint

getset

Returns or sets the arc end point

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ReferencePoint instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ReferencePoint NXOpen.CAM.CircularAboutAxisMoveBuilder.EndPointBuilder

get

Returns the end point builder

Created in NX12.0.1

License requirements: None.

unsafe double NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtendAngle

getset

Returns or sets the extend angle

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ExpressionDouble instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ExpressionDouble NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtendAngleBuilder

get

Returns the extend angle builder

Created in NX12.0.1

License requirements: None.

unsafe double NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtendDistance

getset

Returns or sets the extend distance

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ExpressionDouble instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ExpressionDouble NXOpen.CAM.CircularAboutAxisMoveBuilder.ExtendDistanceBuilder

get

Returns the extend distance builder

Created in NX12.0.1

License requirements: None.

unsafe NXOpen.CAM.CircularAboutAxisMoveBuilder.EndType NXOpen.CAM.CircularAboutAxisMoveBuilder.MotionEndType

getset

Returns or sets the arc end type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe double NXOpen.CAM.CircularAboutAxisMoveBuilder.SweepAngle

getset

Returns or sets the sweep angle

Created in NX5.0.0

Deprecated in NX12.0.1. Use NXOpen.CAM.ExpressionDouble instead.

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.ExpressionDouble NXOpen.CAM.CircularAboutAxisMoveBuilder.SweepAngleBuilder

get

Returns the sweep angle builder

Created in NX12.0.1

License requirements: None.

The documentation for this class was generated from the following file:

CAM_CircularAboutAxisMoveBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation