NXOpen.CAM.Blade Class Reference

Represents a Blade Rough Drive Method Builder More...

Inheritance diagram for NXOpen.CAM.Blade:

Public Types
enum	MaterialSideType { Same, Opposite }
	Available types for Flip Material, SDM: Select Cut Direction More...

Properties
unsafe NXOpen.CAM.BladeFinishPass	BladeFinishPass [get]
	Returns the blade finish pass builder More...
unsafe NXOpen.CAM.BladeSideEntry	BladeSideEntry [get]
	Returns the blade side entry builder More...
unsafe NXOpen.CAM.BladeStepOver	BladeStepOver [get]
	Returns the blade stepover builder More...
unsafe NXOpen.CAM.CutDirection.Types	CutDirection [get, set]
	Returns or sets the Cut Direction More...
unsafe NXOpen.CAM.CutPatternBuilder	CutPattern [get]
	Returns the cut pattern builder More...
unsafe NXOpen.CAM.BladeEdge	LeadingEdge [get]
	Returns the leading edge builder More...
unsafe NXOpen.CAM.BladeEdge	TrailingEdge [get]
	Returns the trailing edge builder More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...
void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...
override string	ToString ()
	Returns a String that represents the current Object. More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Blade Rough Drive Method Builder

This is an abstract superclass that has instantaible subclasses

Created in NX7.0.0

Member Enumeration Documentation

enum NXOpen.CAM.Blade.MaterialSideType

Available types for Flip Material, SDM: Select Cut Direction

Enumerator
Same	same
Opposite	opp

Property Documentation

unsafe NXOpen.CAM.BladeFinishPass NXOpen.CAM.Blade.BladeFinishPass

get

Returns the blade finish pass builder

Created in NX12.0.2

License requirements: None.

unsafe NXOpen.CAM.BladeSideEntry NXOpen.CAM.Blade.BladeSideEntry

get

Returns the blade side entry builder

Created in NX12.0.2

License requirements: None.

unsafe NXOpen.CAM.BladeStepOver NXOpen.CAM.Blade.BladeStepOver

get

Returns the blade stepover builder

Created in NX12.0.2

License requirements: None.

unsafe NXOpen.CAM.CutDirection.Types NXOpen.CAM.Blade.CutDirection

getset

Returns or sets the Cut Direction

Created in NX7.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.CutPatternBuilder NXOpen.CAM.Blade.CutPattern

get

Returns the cut pattern builder

Created in NX7.0.0

License requirements: None.

unsafe NXOpen.CAM.BladeEdge NXOpen.CAM.Blade.LeadingEdge

get

Returns the leading edge builder

Created in NX7.0.0

License requirements: None.

unsafe NXOpen.CAM.BladeEdge NXOpen.CAM.Blade.TrailingEdge

get

Returns the trailing edge builder

Created in NX7.0.0

License requirements: None.

---

The documentation for this class was generated from the following file:

• CAM_Blade.cs