Represents a NXOpen.CAE.ResultsReductionBuilder More...

Inheritance diagram for NXOpen.CAE.ResultsReductionBuilder:

Public Types
enum	EvaluationError { Skip, ZeroFill, Abort }
	evaluation error options More...

enum	IncompatibleResults { Skip, Abort }
	Incompatible results options More...

enum	NoData { Skip, ZeroFill }
	No data options More...

enum	Output { ExportResultFile, CreatePostView, CreateField }
	output types More...

Public Types inherited from NXOpen.CAE.ResultsManipulationBuilder
enum	Action { Export, ExportResultsOnly, ExportResultsAndModel, CreateImportedResult, CreateCompanionResult, CreateCompanionResultWithModel, CreateImportedSolution }
	Action options More...

enum	ElementValueAtNode { Average, Maximum, Minimum, Sum }
	Value at Nodes for element nodal values More...

enum	OutputResultType { Companion, Full }
	Output result types More...

enum	ResultAppendMethod { CreateNewLoadCases, MergeWithPrimaryResultsData }
	Result Append Method options More...

enum	UnitsSystem { None, FromResult, UserDefined }
	Units system options More...

Public Member Functions
unsafe void	SetDependentDomain (NXOpen.Fields.FieldDomain domain)
	Set Dependent Domain More...

unsafe void	SetDependentDomainName (string domainName)
	Set Dependent Domain Name More...

unsafe void	SetDependentEnum (int depenDomain)
	Set Dependent Domain Enum More...

unsafe void	SetElementValueAtNode (NXOpen.CAE.ResultsManipulationBuilder.ElementValueAtNode value)
	Set element value to be used at a node More...

unsafe void	SetEvaluationErrorOption (NXOpen.CAE.ResultsReductionBuilder.EvaluationError evaluationErrorOption)
	Set evaluation error option More...

unsafe void	SetFieldName (string fieldName)
	Set field Name to be created More...

unsafe void	SetFormula (string formula)
	The formula More...

unsafe void	SetIncompatibleResultsOption (NXOpen.CAE.ResultsReductionBuilder.IncompatibleResults incompatibleResultsOption)
	Set incompatible results option More...

unsafe void	SetIndependentDomain (NXOpen.Fields.FieldDomain domain)
	Set Independent Domain More...

unsafe void	SetIndependentDomainName (string domainName)
	Set Independent Domain Name More...

unsafe void	SetIndependentEnum (int indepenDomain)
	Set Independent Domain Enum More...

unsafe void	SetNoDataOption (NXOpen.CAE.ResultsReductionBuilder.NoData noDataOption)
	Set no data option More...

unsafe void	SetOutput (NXOpen.CAE.ResultsReductionBuilder.Output output)
	Set output type from result reduction More...

unsafe void	SetResults (NXOpen.CAE.Result[] results, NXOpen.CAE.ResultParameters[] parameters, string[] names)
	The result types More...

unsafe void	SetResultTypeName (string resultTypeName)
	Set result type name that will be displayed in postview More...

unsafe void	SetResultUnit (NXOpen.Unit unit)
	Set result unit for given result type/dependent field variable type More...

unsafe void	SetViewIndexForPostView (int viewIndex)
	Set view index where postview will be created More...

Public Member Functions inherited from NXOpen.CAE.ResultsManipulationBuilder
unsafe void	SetAction (NXOpen.CAE.ResultsManipulationBuilder.Action action)
	The action More...

unsafe void	SetAppendMethod (NXOpen.CAE.ResultsManipulationBuilder.ResultAppendMethod appendMethod)
	The append method if action is NXOpen.CAE.ResultsManipulationBuilder.Action.CreateCompanionResult More...

unsafe void	SetCompanionResultName (string companionResultName)
	The companion result name if action is NXOpen.CAE.ResultsManipulationBuilder.Action.CreateCompanionResult More...

unsafe void	SetCompanionResultReference (NXOpen.CAE.SimResultReference tResultRef)
	The companion Result Reference if action is NXOpen.CAE.ResultsManipulationBuilder.Action.CreateCompanionResult More...

unsafe void	SetCompanionSolution (NXOpen.CAE.SimSolution solution)
	The companion solution if action is NXOpen.CAE.ResultsManipulationBuilder.Action.CreateCompanionResult More...

unsafe void	SetCreateSolution (bool createSolution)
	Specifies whether to create an imported solution More...

unsafe void	SetImportedSolutionName (string importedSolutionName)
	The imported solution name if action is NXOpen.CAE.ResultsManipulationBuilder.Action.CreateImportedSolution More...

unsafe void	SetImportResult (bool importResult)
	Import the result immediately More...

unsafe void	SetIncludeModel (bool includeModel)
	Include nodes and elements More...

unsafe void	SetLoadcaseName (string loadcaseName)
	The load case name More...

unsafe void	SetOutputFile (string outputFile)
	The output file More...

unsafe void	SetOutputName (string outputName)
	The output name More...

unsafe void	SetOutputQuantity (NXOpen.CAE.Result.Quantity quantity)
	The output quantity More...

unsafe void	SetOutputResultType (NXOpen.CAE.ResultsManipulationBuilder.OutputResultType type)
	The result output type More...

unsafe void	SetUnitsSystem (NXOpen.CAE.ResultsManipulationBuilder.UnitsSystem unitsSystem)
	The units system More...

unsafe void	SetUnitsSystemResult (NXOpen.CAE.Result result)
	The result to copy the units system from More...

unsafe void	SetUserDefinedUnitsSystem (NXOpen.CAE.Result.ResultBasicUnit unitsSystem)
	The user-defined units system More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Detailed Description

Represents a NXOpen.CAE.ResultsReductionBuilder

To obtain an instance of this class use NXOpen.Session.ResultManager .

Created in NX8.5.0

Member Enumeration Documentation

enum NXOpen.CAE.ResultsReductionBuilder.EvaluationError

evaluation error options

Enumerator
Skip
ZeroFill
Abort

enum NXOpen.CAE.ResultsReductionBuilder.IncompatibleResults

Incompatible results options

Enumerator
Skip
Abort

enum NXOpen.CAE.ResultsReductionBuilder.NoData

No data options

Enumerator
Skip
ZeroFill

enum NXOpen.CAE.ResultsReductionBuilder.Output

output types

Enumerator
ExportResultFile
CreatePostView
CreateField

Member Function Documentation

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetDependentDomain ( NXOpen.Fields.FieldDomain domain )

inline

Set Dependent Domain

Created in NX9.0.0

Deprecated in NX1847.0.0. Use NXOpen.CAE.ResultsReductionBuilder.SetDependentEnum instead.

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

domain Dependent Domain

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetDependentDomainName ( string domainName )

inline

Set Dependent Domain Name

Created in NX9.0.0

Deprecated in NX12.0.0. Use NXOpen.CAE.ResultsReductionBuilder.SetDependentDomain instead.

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

domainName

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetDependentEnum ( int depenDomain )

inline

Set Dependent Domain Enum

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

depenDomain

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetElementValueAtNode ( NXOpen.CAE.ResultsManipulationBuilder.ElementValueAtNode value )

inline

Set element value to be used at a node

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

value

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetEvaluationErrorOption ( NXOpen.CAE.ResultsReductionBuilder.EvaluationError evaluationErrorOption )

inline

Set evaluation error option

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

evaluationErrorOption

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetFieldName ( string fieldName )

inline

Set field Name to be created

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

fieldName

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetFormula ( string formula )

inline

The formula

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

formula set formula

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetIncompatibleResultsOption ( NXOpen.CAE.ResultsReductionBuilder.IncompatibleResults incompatibleResultsOption )

inline

Set incompatible results option

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

incompatibleResultsOption

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetIndependentDomain ( NXOpen.Fields.FieldDomain domain )

inline

Set Independent Domain

Created in NX9.0.0

Deprecated in NX1847.0.0. Use NXOpen.CAE.ResultsReductionBuilder.SetIndependentEnum instead.

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

domain Independent Domain

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetIndependentDomainName ( string domainName )

inline

Set Independent Domain Name

Created in NX9.0.0

Deprecated in NX12.0.0. Use NXOpen.CAE.ResultsReductionBuilder.SetIndependentDomain instead.

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

domainName

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetIndependentEnum ( int indepenDomain )

inline

Set Independent Domain Enum

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

indepenDomain

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetNoDataOption ( NXOpen.CAE.ResultsReductionBuilder.NoData noDataOption )

inline

Set no data option

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

noDataOption

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetOutput ( NXOpen.CAE.ResultsReductionBuilder.Output output )

inline

Set output type from result reduction

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

output

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetResults	(	NXOpen.CAE.Result[]	results,
		NXOpen.CAE.ResultParameters[]	parameters,
		string[]	names
	)

inline

The result types

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

results	set results
parameters	set result parameters
names	set result names

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetResultTypeName ( string resultTypeName )

inline

Set result type name that will be displayed in postview

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

resultTypeName

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetResultUnit ( NXOpen.Unit unit )

inline

Set result unit for given result type/dependent field variable type

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

unit

unsafe void NXOpen.CAE.ResultsReductionBuilder.SetViewIndexForPostView ( int viewIndex )

inline

Set view index where postview will be created

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

viewIndex

The documentation for this class was generated from the following file:

CAE_ResultsReductionBuilder.cs

Public Types

Public Member Functions

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation