Result probe Builder More...

Inheritance diagram for NXOpen.CAE.ResultProbeBuilder:

Public Types
enum	BandCombinationOpt { ArithmeticMean, Rms, Rss, Sum, WeightedAverage, Integral, WeightedRMS, WeightedRSS }
	Options to band combination More...

enum	CombineAcrossEntities { ArithmeticMean, Minimum, Maximum, Sum, Difference, WeightedAverage, Integral, AbsoluteMaximum, AbsoluteMinimum, SignedAbsoluteMaximum, SignedAbsoluteMinimum, Rms, Rss, WeightedRMS, WeightedRSS }
	Options to combine multiple geometry values More...

enum	CombineAcrossIterations { ArithmeticMean, AbsoluteMaximum, Maximum, AbsoluteMinimum, Minimum, Sum, SignedAbsoluteMaximum, SignedAbsoluteMinimum }
	Iteration combination types More...

enum	CombineAcrossLoadcases { ArithmeticMean, AbsoluteMaximum, Maximum, AbsoluteMinimum, Minimum, Sum, SignedAbsoluteMaximum, SignedAbsoluteMinimum, Rss, Rms, UseIterCombination }
	Loadcase combination types More...

enum	EdgeIntegral { Length, Area }
	Options to calculate CAE.ResultProbeBuilder.GeometryValue.WeightedAverage or CAE.ResultProbeBuilder.GeometryValue.Integral over elements on an edge More...

enum	ElemIntegral { Area, Volume }
	Options to calculate Area or Volume Weighted Average over elements More...

enum	ErrorHandling { Fillzero, Skip }
	Options to handel errornious conditions More...

enum	FaceIntegral { Area, Volume }
	Options to calculate CAE.ResultProbeBuilder.GeometryValue.WeightedAverage or CAE.ResultProbeBuilder.GeometryValue.Integral over elements on an face More...

enum	FrequencyPackingOpt { Octave, OneThirdOctave, OneTwelfthOctave, SingleBand }
	Options to frequency packing More...

enum	GeometryValue { ArithmeticMean, Minimum, Maximum, Sum, WeightedAverage, Integral, AbsoluteMaximum, AbsoluteMinimum, SignedAbsoluteMaximum, SignedAbsoluteMinimum, None, Rms, Rss, WeightedRMS, WeightedRSS }
	Options to combine geometry value More...

enum	GroupIntegral { Area, Volume }
	Options to calculate CAE.ResultProbeBuilder.GeometryValue.WeightedAverage or CAE.ResultProbeBuilder.GeometryValue.Integral over elements More...

enum	Interpolation { AmplitudePhase, RealImaginary, RealImaginaryWithUnwrappedPhase }
	Interpolation type filter More...

enum	IterationListSelOpt { LinearSweep, LogSweep }
	Options to calculate at values iterations More...

enum	IterationListSweepOpt { Interval, Base, NumberOfSteps, StepValue }
	Options to calculate interpolated iterations More...

enum	IterationSelection { First, Last, NeartoValue, SpecifyIndex, All, SpecifyRange, BetweenValues, None, AtValue, AtValues }
	Iteration definition method More...

enum	IterationType { Time, Frequency, LoadFactor, EigenValue, All }
	Iteration type filter More...

enum	LoadcaseSelection { First, Last, SpecifyIndex, All, Ignore, None, SpecifyRange, BetweenValues }
	Loadcase definition method More...

enum	NodalCombination { ArithmeticMean, Minimum, Maximum, Sum }
	Options to combine multiple geometry values More...

enum	SelectionType { EntireModel, Nodes, Elements, Points, Edges, Faces, Bodies, QueryCurve, None, Group }
	Type of objects where probe value will be calculated More...

enum	SuperIterType { None, Harmonic, RotationSpeed, DesignCycle, Acoustic, BoltSequence }
	Super iteration definition method More...

Public Member Functions
unsafe NXOpen.Unit	GetDefaultUnit ()
	Returns the default unit for the current setting of Result Probe. More...

unsafe string[]	GetDescription ()
	Returns the description More...

unsafe void	SetDescription (string[] description)
	Sets the description More...

unsafe void	SetEntityObjects (NXOpen.TaggedObject[] entityObjs)
	Sets the entity objects for extracting result data. More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe int	AcousticModeIndex `[get, set]`
	Returns or sets the acousticModes index More...

unsafe NXOpen.CAE.ResultProbeBuilder.BandCombinationOpt	BandCombinationType `[get, set]`
	Returns or sets the option for frequency packing More...

unsafe int	BoltSequenceIndex `[get, set]`
	Returns or sets the acousticModes index More...

unsafe bool	CombineAcross `[get, set]`
	Returns or sets the combine across More...

unsafe bool	CombineAcrossIteration `[get, set]`
	Returns or sets the combine geom More...

unsafe bool	CombineAcrossLcase `[get, set]`
	Returns or sets the combine loadcase More...

unsafe NXOpen.CAE.ResultProbeBuilder.CombineAcrossEntities	CombinedValue `[get, set]`
	Returns or sets the combined value More...

unsafe NXOpen.CAE.ResultProbeBuilder.CombineAcrossIterations	CombineIterOption `[get, set]`
	Returns or sets the combine option More...

unsafe NXOpen.CAE.ResultProbeBuilder.CombineAcrossLoadcases	CombineLcaseOption `[get, set]`
	Returns or sets the combine loadcase option More...

unsafe bool	ConvertOrderToWF `[get, set]`
	Returns or sets the convert order to waterfall More...

unsafe int	DesignCycleIndex `[get, set]`
	Returns or sets the desingCycle index More...

unsafe NXOpen.CAE.ResultProbeBuilder.EdgeIntegral	EdgeIntegralOption `[get, set]`
	Returns or sets the face integral option More...

unsafe NXOpen.CAE.ResultProbeBuilder.ElemIntegral	ElemIntegralOption `[get, set]`
	Returns or sets the element integral option More...

unsafe int	EndIterIndex `[get, set]`
	Returns or sets the end iter index More...

unsafe double	EndIterValForIterSweep `[get, set]`
	Returns or sets the end iteration value to iteration sweep More...

unsafe double	EndIterValue `[get, set]`
	Returns or sets the end iter value More...

unsafe int	EndLcaseIndex `[get, set]`
	Returns or sets the end lcase index More...

unsafe double	EndLcaseValue `[get, set]`
	Returns or sets the end lcase value More...

unsafe NXOpen.CAE.ResultProbeBuilder.ErrorHandling	ErrorHndl `[get, set]`
	Returns or sets the error handel value More...

unsafe NXOpen.CAE.ResultProbeBuilder.FaceIntegral	FaceIntegralOption `[get, set]`
	Returns or sets the face integral option More...

unsafe string	Formula `[get, set]`
	Returns or sets the formula More...

unsafe bool	FrequencyPacking `[get, set]`
	Returns or sets the logical value to enable frequency packing More...

unsafe NXOpen.CAE.ResultProbeBuilder.FrequencyPackingOpt	FrequencyPackingType `[get, set]`
	Returns or sets the option for frequency packing More...

unsafe NXOpen.CAE.ResultProbeBuilder.GeometryValue	GeometryAverageValue `[get, set]`
	Returns or sets the geometry average value More...

unsafe NXOpen.CAE.ResultProbeBuilder.GroupIntegral	GroupIntegralOption `[get, set]`
	Returns or sets the group integral option More...

unsafe NXOpen.CAE.SelectGroupsBuilder	GroupsSelectBuilder `[get]`
	Returns the select groups More...

unsafe int	HarmonicIndex `[get, set]`
	Returns or sets the harmonic index More...

unsafe NXOpen.CAE.ResultProbeBuilder.Interpolation	InterpolationType `[get, set]`
	Returns or sets the interpolation type More...

unsafe NXOpen.CAE.ResultProbeBuilder.IterationSelection	Iteration `[get, set]`
	Returns or sets the iteration More...

unsafe int	IterationIndex `[get, set]`
	Returns or sets the iteration index More...

unsafe NXOpen.CAE.ResultProbeBuilder.IterationListSelOpt	IterationListSelOption `[get, set]`
	Returns or sets the interpolation option for iteration list More...

unsafe NXOpen.CAE.ResultProbeBuilder.IterationListSweepOpt	IterationListSweepOption `[get, set]`
	Returns or sets the sweep option for iteration interpolation More...

unsafe NXOpen.CAE.ResultProbeBuilder.IterationType	IterationTypeOption `[get, set]`
	Returns or sets the iteration type More...

unsafe double	IterNearValue `[get, set]`
	Returns or sets the iteration value More...

unsafe NXOpen.CAE.ResultProbeBuilder.LoadcaseSelection	Loadcase `[get, set]`
	Returns or sets the loadcase More...

unsafe int	LoadcaseIndex `[get, set]`
	Returns or sets the loadcase index More...

unsafe double	LogBaseForIterSweep `[get, set]`
	Returns or sets the logarithmic base for iteration sweep More...

unsafe NXOpen.CAE.ResultProbeBuilder.SelectionType	ModelSelectionType `[get, set]`
	Returns or sets the model selection type More...

unsafe NXOpen.CAE.ResultProbeBuilder.NodalCombination	NodalAveraging `[get, set]`
	Returns or sets the nodal combinatione More...

unsafe int	NumOfStepsForIterSweep `[get, set]`
	Returns or sets the number of steps in iteration sweep More...

unsafe bool	PickSequentially `[get, set]`
	Returns or sets the pick sequentially More...

unsafe string	ProbeName `[get, set]`
	Returns or sets the probe name More...

unsafe NXOpen.CAE.QueryCurveUsageOptions	QueryCurveUsageOptions `[get]`
	Returns the query curve usage options More...

unsafe NXOpen.CAE.SimResultReference.Type	ResultReferenceType `[get, set]`
	Returns or sets the result reference type More...

unsafe NXOpen.CAE.Result.Quantity	ResultType `[get, set]`
	Returns or sets the output result type value More...

unsafe double	RotationSpeedValue `[get, set]`
	Returns or sets the rotation speed value More...

unsafe int	SkipSteps `[get, set]`
	Returns or sets the skip steps More...

unsafe int	StartIterIndex `[get, set]`
	Returns or sets the start iter index More...

unsafe double	StartIterValForLinearSweep `[get, set]`
	Returns or sets the start iteration value to linear sweep More...

unsafe double	StartIterValForLogSweep `[get, set]`
	Returns or sets the start iteration value to log sweep More...

unsafe double	StartIterValue `[get, set]`
	Returns or sets the start iter value More...

unsafe int	StartLcaseIndex `[get, set]`
	Returns or sets the start lcase index More...

unsafe double	StartLcaseValue `[get, set]`
	Returns or sets the start lcase value More...

unsafe double	StepValForIterSweep `[get, set]`
	Returns or sets the step value for iteration sweep More...

unsafe NXOpen.CAE.ResultProbeBuilder.SuperIterType	SuperIterationType `[get, set]`
	Returns or sets the query curve options More...

unsafe NXOpen.Unit	Unit `[get, set]`
	Returns or sets the unit More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Result probe Builder

An instance of this class can not be obtained

Default values.

Property

Value

QueryCurveUsageOptions.CurveUsage

UseVertices

QueryCurveUsageOptions.DistanceTolerance

0

QueryCurveUsageOptions.ResultantCurveLocator

UseAsIs

QueryCurveUsageOptions.ResultantLocationTolerance

0

Created in NX10.0.0

Member Enumeration Documentation

enum NXOpen.CAE.ResultProbeBuilder.BandCombinationOpt

Options to band combination

Enumerator
ArithmeticMean
Rms
Rss
Sum
WeightedAverage
Integral
WeightedRMS
WeightedRSS

enum NXOpen.CAE.ResultProbeBuilder.CombineAcrossEntities

Options to combine multiple geometry values

Enumerator
ArithmeticMean
Minimum
Maximum
Sum
Difference
WeightedAverage
Integral
AbsoluteMaximum
AbsoluteMinimum
SignedAbsoluteMaximum
SignedAbsoluteMinimum
Rms
Rss
WeightedRMS
WeightedRSS

enum NXOpen.CAE.ResultProbeBuilder.CombineAcrossIterations

Iteration combination types

Enumerator
ArithmeticMean
AbsoluteMaximum
Maximum
AbsoluteMinimum
Minimum
Sum
SignedAbsoluteMaximum
SignedAbsoluteMinimum

enum NXOpen.CAE.ResultProbeBuilder.CombineAcrossLoadcases

Loadcase combination types

Enumerator
ArithmeticMean
AbsoluteMaximum
Maximum
AbsoluteMinimum
Minimum
Sum
SignedAbsoluteMaximum
SignedAbsoluteMinimum
Rss
Rms
UseIterCombination

enum NXOpen.CAE.ResultProbeBuilder.EdgeIntegral

Options to calculate CAE.ResultProbeBuilder.GeometryValue.WeightedAverage or CAE.ResultProbeBuilder.GeometryValue.Integral over elements on an edge

Enumerator
Length
Area

enum NXOpen.CAE.ResultProbeBuilder.ElemIntegral

Options to calculate Area or Volume Weighted Average over elements

Enumerator
Area
Volume

enum NXOpen.CAE.ResultProbeBuilder.ErrorHandling

Options to handel errornious conditions

Enumerator
Fillzero
Skip

enum NXOpen.CAE.ResultProbeBuilder.FaceIntegral

Options to calculate CAE.ResultProbeBuilder.GeometryValue.WeightedAverage or CAE.ResultProbeBuilder.GeometryValue.Integral over elements on an face

Enumerator
Area
Volume

enum NXOpen.CAE.ResultProbeBuilder.FrequencyPackingOpt

Options to frequency packing

Enumerator
Octave
OneThirdOctave
OneTwelfthOctave
SingleBand

enum NXOpen.CAE.ResultProbeBuilder.GeometryValue

Options to combine geometry value

Enumerator
ArithmeticMean
Minimum
Maximum
Sum
WeightedAverage
Integral
AbsoluteMaximum
AbsoluteMinimum
SignedAbsoluteMaximum
SignedAbsoluteMinimum
None
Rms
Rss
WeightedRMS
WeightedRSS

enum NXOpen.CAE.ResultProbeBuilder.GroupIntegral

Options to calculate CAE.ResultProbeBuilder.GeometryValue.WeightedAverage or CAE.ResultProbeBuilder.GeometryValue.Integral over elements

Enumerator
Area
Volume

enum NXOpen.CAE.ResultProbeBuilder.Interpolation

Interpolation type filter

Enumerator
AmplitudePhase
RealImaginary
RealImaginaryWithUnwrappedPhase

enum NXOpen.CAE.ResultProbeBuilder.IterationListSelOpt

Options to calculate at values iterations

Enumerator
LinearSweep
LogSweep

enum NXOpen.CAE.ResultProbeBuilder.IterationListSweepOpt

Options to calculate interpolated iterations

Enumerator
Interval
Base
NumberOfSteps
StepValue

enum NXOpen.CAE.ResultProbeBuilder.IterationSelection

Iteration definition method

Enumerator
First
Last
NeartoValue
SpecifyIndex
All
SpecifyRange
BetweenValues
None
AtValue
AtValues

enum NXOpen.CAE.ResultProbeBuilder.IterationType

Iteration type filter

Enumerator
Time
Frequency
LoadFactor
EigenValue
All

enum NXOpen.CAE.ResultProbeBuilder.LoadcaseSelection

Loadcase definition method

Enumerator
First
Last
SpecifyIndex
All
Ignore
None
SpecifyRange
BetweenValues

enum NXOpen.CAE.ResultProbeBuilder.NodalCombination

Options to combine multiple geometry values

Enumerator
ArithmeticMean
Minimum
Maximum
Sum

enum NXOpen.CAE.ResultProbeBuilder.SelectionType

Type of objects where probe value will be calculated

Enumerator
EntireModel
Nodes
Elements
Points
Edges
Faces
Bodies
QueryCurve
None
Group

enum NXOpen.CAE.ResultProbeBuilder.SuperIterType

Super iteration definition method

Enumerator
None
Harmonic
RotationSpeed
DesignCycle
Acoustic
BoltSequence

Member Function Documentation

unsafe NXOpen.Unit NXOpen.CAE.ResultProbeBuilder.GetDefaultUnit ( )

inline

Returns the default unit for the current setting of Result Probe.

it will return null in case Probe is unitless.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Returns

unsafe string [] NXOpen.CAE.ResultProbeBuilder.GetDescription ( )

inline

Returns the description

Created in NX10.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Returns

unsafe void NXOpen.CAE.ResultProbeBuilder.SetDescription ( string[] description )

inline

Sets the description

Created in NX10.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

description

unsafe void NXOpen.CAE.ResultProbeBuilder.SetEntityObjects ( NXOpen.TaggedObject[] entityObjs )

inline

Sets the entity objects for extracting result data.

Objects passed to this method are of the type defined by CAE.ResultProbeBuilder.ModelSelectionType . The types of objects allowed to be set are is defined by the NXOpen.CAE.ResultProbeBuilder.SelectionType .

Created in NX10.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

entityObjs

Property Documentation

unsafe int NXOpen.CAE.ResultProbeBuilder.AcousticModeIndex

getset

Returns or sets the acousticModes index

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.BandCombinationOpt NXOpen.CAE.ResultProbeBuilder.BandCombinationType

getset

Returns or sets the option for frequency packing

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.BoltSequenceIndex

getset

Returns or sets the acousticModes index

Created in NX1847.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe bool NXOpen.CAE.ResultProbeBuilder.CombineAcross

getset

Returns or sets the combine across

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe bool NXOpen.CAE.ResultProbeBuilder.CombineAcrossIteration

getset

Returns or sets the combine geom

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe bool NXOpen.CAE.ResultProbeBuilder.CombineAcrossLcase

getset

Returns or sets the combine loadcase

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.CombineAcrossEntities NXOpen.CAE.ResultProbeBuilder.CombinedValue

getset

Returns or sets the combined value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.CombineAcrossIterations NXOpen.CAE.ResultProbeBuilder.CombineIterOption

getset

Returns or sets the combine option

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.CombineAcrossLoadcases NXOpen.CAE.ResultProbeBuilder.CombineLcaseOption

getset

Returns or sets the combine loadcase option

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe bool NXOpen.CAE.ResultProbeBuilder.ConvertOrderToWF

getset

Returns or sets the convert order to waterfall

Created in NX1899.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.DesignCycleIndex

getset

Returns or sets the desingCycle index

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.EdgeIntegral NXOpen.CAE.ResultProbeBuilder.EdgeIntegralOption

getset

Returns or sets the face integral option

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.ElemIntegral NXOpen.CAE.ResultProbeBuilder.ElemIntegralOption

getset

Returns or sets the element integral option

Created in NX1899.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.EndIterIndex

getset

Returns or sets the end iter index

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.EndIterValForIterSweep

getset

Returns or sets the end iteration value to iteration sweep

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.EndIterValue

getset

Returns or sets the end iter value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.EndLcaseIndex

getset

Returns or sets the end lcase index

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.EndLcaseValue

getset

Returns or sets the end lcase value

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.ErrorHandling NXOpen.CAE.ResultProbeBuilder.ErrorHndl

getset

Returns or sets the error handel value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.FaceIntegral NXOpen.CAE.ResultProbeBuilder.FaceIntegralOption

getset

Returns or sets the face integral option

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe string NXOpen.CAE.ResultProbeBuilder.Formula

getset

Returns or sets the formula

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe bool NXOpen.CAE.ResultProbeBuilder.FrequencyPacking

getset

Returns or sets the logical value to enable frequency packing

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.FrequencyPackingOpt NXOpen.CAE.ResultProbeBuilder.FrequencyPackingType

getset

Returns or sets the option for frequency packing

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.GeometryValue NXOpen.CAE.ResultProbeBuilder.GeometryAverageValue

getset

Returns or sets the geometry average value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.GroupIntegral NXOpen.CAE.ResultProbeBuilder.GroupIntegralOption

getset

Returns or sets the group integral option

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.SelectGroupsBuilder NXOpen.CAE.ResultProbeBuilder.GroupsSelectBuilder

get

Returns the select groups

Created in NX1872.0.0

License requirements: None.

unsafe int NXOpen.CAE.ResultProbeBuilder.HarmonicIndex

getset

Returns or sets the harmonic index

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.Interpolation NXOpen.CAE.ResultProbeBuilder.InterpolationType

getset

Returns or sets the interpolation type

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.IterationSelection NXOpen.CAE.ResultProbeBuilder.Iteration

getset

Returns or sets the iteration

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.IterationIndex

getset

Returns or sets the iteration index

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.IterationListSelOpt NXOpen.CAE.ResultProbeBuilder.IterationListSelOption

getset

Returns or sets the interpolation option for iteration list

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.IterationListSweepOpt NXOpen.CAE.ResultProbeBuilder.IterationListSweepOption

getset

Returns or sets the sweep option for iteration interpolation

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.IterationType NXOpen.CAE.ResultProbeBuilder.IterationTypeOption

getset

Returns or sets the iteration type

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.IterNearValue

getset

Returns or sets the iteration value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.LoadcaseSelection NXOpen.CAE.ResultProbeBuilder.Loadcase

getset

Returns or sets the loadcase

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.LoadcaseIndex

getset

Returns or sets the loadcase index

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.LogBaseForIterSweep

getset

Returns or sets the logarithmic base for iteration sweep

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.SelectionType NXOpen.CAE.ResultProbeBuilder.ModelSelectionType

getset

Returns or sets the model selection type

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.NodalCombination NXOpen.CAE.ResultProbeBuilder.NodalAveraging

getset

Returns or sets the nodal combinatione

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.NumOfStepsForIterSweep

getset

Returns or sets the number of steps in iteration sweep

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe bool NXOpen.CAE.ResultProbeBuilder.PickSequentially

getset

Returns or sets the pick sequentially

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe string NXOpen.CAE.ResultProbeBuilder.ProbeName

getset

Returns or sets the probe name

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.QueryCurveUsageOptions NXOpen.CAE.ResultProbeBuilder.QueryCurveUsageOptions

get

Returns the query curve usage options

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.SimResultReference.Type NXOpen.CAE.ResultProbeBuilder.ResultReferenceType

getset

Returns or sets the result reference type

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.Result.Quantity NXOpen.CAE.ResultProbeBuilder.ResultType

getset

Returns or sets the output result type value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.RotationSpeedValue

getset

Returns or sets the rotation speed value

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.SkipSteps

getset

Returns or sets the skip steps

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.StartIterIndex

getset

Returns or sets the start iter index

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.StartIterValForLinearSweep

getset

Returns or sets the start iteration value to linear sweep

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.StartIterValForLogSweep

getset

Returns or sets the start iteration value to log sweep

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.StartIterValue

getset

Returns or sets the start iter value

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe int NXOpen.CAE.ResultProbeBuilder.StartLcaseIndex

getset

Returns or sets the start lcase index

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.StartLcaseValue

getset

Returns or sets the start lcase value

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe double NXOpen.CAE.ResultProbeBuilder.StepValForIterSweep

getset

Returns or sets the step value for iteration sweep

Created in NX1872.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.CAE.ResultProbeBuilder.SuperIterType NXOpen.CAE.ResultProbeBuilder.SuperIterationType

getset

Returns or sets the query curve options

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

unsafe NXOpen.Unit NXOpen.CAE.ResultProbeBuilder.Unit

getset

Returns or sets the unit

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

License requirements to set this property: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

The documentation for this class was generated from the following file:

CAE_ResultProbeBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation