NXOpen.CAE.LaminateSpreadsheetReportBuilder Class Reference

Represents a NXOpen.CAE.LaminateSpreadsheetReport builder More...

Inheritance diagram for NXOpen.CAE.LaminateSpreadsheetReportBuilder:

Public Types
enum	CoordinateSystemType { Ply, Laminate }
	Coordinate system to use for ply stresses, ply failure indices, ply strength ratios and ply margins of safety calculation. More...
enum	ElemNodalOptionType { Elemental, Nodal }
	Element-Nodal option More...
enum	EnvelopeRule {   MaxMin, Min, Max, AbsMax,   AbsMin }
	Result enveloping rules. More...
enum	FailureModeType { InPlanePly, Interlaminar, Both }
	Failure indices mode. More...
enum	FilteringType {   None, StressXX, StressYY, StressZZ,   StressXY, StressZX, StressYZ, StressMaxP,   StressMinP, StressMaxS, StressVonMises, StrainXX,   StrainYY, StrainZZ, StrainXY, StrainZX,   StrainYZ, StrainMaxP, StrainMinP, StrainMaxS,   StrainVonMises, PlyFailureIndex, PlyStrengthRatio, PlyMarginofSafety,   BondFailureIndex, BondStrengthRatio, BondMarginofSafety }
	Filtering rule for the spreadsheet post report More...
enum	SolverInputType { ShellStress, PlyStress }
	Solver input type More...
enum	SortingType {   ElementId, PlyId, StressXX, StressYY,   StressZZ, StressXY, StressZX, StressYZ,   StressMaxP, StressMinP, StressMaxS, StressVonMises,   StrainXX, StrainYY, StrainZZ, StrainXY,   StrainZX, StrainYZ, StrainMaxP, StrainMinP,   StrainMaxS, StrainVonMises, PlyFailureIndex, PlyStrengthRatio,   PlyMarginofSafety, BondFailureIndex, BondStrengthRatio, BondMarginofSafety }
	Sorting rule for the spreadsheet post report More...
enum	SortOrderType { Ascending, Descending }
	Sorting order : acending or descending More...
enum	ThreshType { AboveTreshold, BelowTreshold }
	The type of threshold used to filter results. More...

Properties
unsafe bool	AbsValueFilter [get, set]
	Returns or sets the absolute value filtering option More...
unsafe bool	AbsValueSort [get, set]
	Returns or sets the absolute value sorting option More...
unsafe bool	DetailedOutput [get, set]
	Returns or sets the detailed output display More...
unsafe NXOpen.CAE.LaminateElementFilterBuilder	ElementFilter [get]
	Returns the element filter More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.ElemNodalOptionType	ElemNodalOption [get, set]
	Returns or sets the solver input More...
unsafe bool	FailureIndex [get, set]
	Returns or sets the failure index More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule	FailureIndexRule [get, set]
	Returns or sets the failure index summary table enveloping rule More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.FailureModeType	FailureMode [get, set]
	Returns or sets the failure mode More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.FilteringType	FilterType [get, set]
	Returns or sets the filter type to use for detailed output More...
unsafe NXOpen.CAE.LaminatePly.InterLaminarFailureTheoryType	InterLamFTOverride1 [get, set]
	Returns or sets the Interlaminar fialure theory override 1 More...
unsafe bool	InterLamFTOverride1State [get, set]
	Returns or sets the interlaminare fialure theory override 1 state More...
unsafe NXOpen.CAE.LaminatePly.InterLaminarFailureTheoryType	InterLamFTOverride2 [get, set]
	Returns or sets the Interlaminar fialure theory override 2 More...
unsafe bool	InterLamFTOverride2State [get, set]
	Returns or sets the interlaminare fialure theory override 2 state More...
unsafe string	Name [get, set]
	Returns or sets the name of the spreadsheet report More...
unsafe bool	PlyBottom [get, set]
	Returns or sets the state of the ply stress calculation at the bottom of each ply More...
unsafe NXOpen.CAE.LaminatePlyFilterBuilder	PlyFilter [get]
	Returns the ply filter More...
unsafe NXOpen.CAE.LaminatePly.PlyFailureTheoryType	PlyFTOverride1 [get, set]
	Returns or sets the ply fialure theory override 1 More...
unsafe bool	PlyFTOverride1State [get, set]
	Returns or sets the ply fialure theory override 1 state More...
unsafe NXOpen.CAE.LaminatePly.PlyFailureTheoryType	PlyFTOverride2 [get, set]
	Returns or sets the ply fialure theory override 2 More...
unsafe bool	PlyFTOverride2State [get, set]
	Returns or sets the ply fialure theory override 2 state More...
unsafe bool	PlyMiddle [get, set]
	Returns or sets the state of the ply stress calculation at the middle of each ply More...
unsafe bool	PlyStrainOutput [get, set]
	Returns or sets the ply strains output control More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule	PlyStrainRule [get, set]
	Returns or sets the ply strains summary table enveloping rule More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.CoordinateSystemType	PlyStressCoordSys [get, set]
	Returns or sets the ply stresses and strains coordinate system More...
unsafe bool	PlyStressMaxP [get, set]
	Returns or sets the ply maximum principal stress and/or strain More...
unsafe bool	PlyStressMaxS [get, set]
	Returns or sets the ply maximum shear stress and/or strain More...
unsafe bool	PlyStressMinP [get, set]
	Returns or sets the ply minimum principal stress and/or strain More...
unsafe bool	PlyStressOutput [get, set]
	Returns or sets the ply stresses output control More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule	PlyStressRule [get, set]
	Returns or sets the ply stresses summary table enveloping rule More...
unsafe bool	PlyStressXX [get, set]
	Returns or sets the ply stress and/or strain XX component More...
unsafe bool	PlyStressXY [get, set]
	Returns or sets the ply stress and/or strain XY component More...
unsafe bool	PlyStressYY [get, set]
	Returns or sets the ply stress and/or strain YY component More...
unsafe bool	PlyStressYZ [get, set]
	Returns or sets the ply stress and/or strain YZ component More...
unsafe bool	PlyStressZX [get, set]
	Returns or sets the ply stress and/or strain ZX component More...
unsafe bool	PlyStressZZ [get, set]
	Returns or sets the ply stress and/or strain ZZ component More...
unsafe bool	PlyTop [get, set]
	Returns or sets the state of the ply stress calculation at the top of each ply More...
unsafe bool	PlyVonMises [get, set]
	Returns or sets the ply Von Mises stress and/or strain More...
unsafe NXOpen.CAE.LaminateReportObject	ReportObject [get, set]
	Returns or sets the report object More...
unsafe double	SafetyFactor [get, set]
	Returns or sets the safety factor More...
unsafe bool	SafetyMargin [get, set]
	Returns or sets the margin of safety More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule	SafetyMarginRule [get, set]
	Returns or sets the strength ratio summary table enveloping rule More...
unsafe bool	ShellResultantFx [get, set]
	Returns or sets the shell stress resultant Fx component More...
unsafe bool	ShellResultantFxy [get, set]
	Returns or sets the shell stress resultant Fxy component More...
unsafe bool	ShellResultantFy [get, set]
	Returns or sets the shell stress resultant Fy component More...
unsafe bool	ShellResultantMx [get, set]
	Returns or sets the shell stress resultant Mx component More...
unsafe bool	ShellResultantMxy [get, set]
	Returns or sets the shell stress resultant Mxy component More...
unsafe bool	ShellResultantMy [get, set]
	Returns or sets the shell stress resultant My component More...
unsafe bool	ShellResultantQx [get, set]
	Returns or sets the shell stress resultant Qx component More...
unsafe bool	ShellResultantQy [get, set]
	Returns or sets the shell stress resultant Qy component More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverInputType	SolverInput [get, set]
	Returns or sets the solver input More...
unsafe bool	SolverPlyStress [get, set]
	Returns or sets the solver ply stresses More...
unsafe bool	SolverShellResultant [get, set]
	Returns or sets the solver shell stress resultant More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortOrderType	SortOrder [get, set]
	Returns or sets the sorting order More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortingType	SortType [get, set]
	Returns or sets the sorting criteria More...
unsafe bool	StrengthRatio [get, set]
	Returns or sets the strength ratio More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule	StrengthRatioRule [get, set]
	Returns or sets the strength ratio summary table enveloping rule More...
unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.ThreshType	ThresholdType [get, set]
	Returns or sets the filtering threshold type More...
unsafe double	ThresholdValue [get, set]
	Returns or sets the filtering threshold value More...
unsafe string	UserDefinedInterLamFTOverride1 [get, set]
	Returns or sets the user defined interLam failure theory override 1 More...
unsafe string	UserDefinedInterLamFTOverride2 [get, set]
	Returns or sets the user defined interLam failure theory override 2 More...
unsafe string	UserDefinedPlyFTOverride1 [get, set]
	Returns or sets the user defined ply failure theory override 1 More...
unsafe string	UserDefinedPlyFTOverride2 [get, set]
	Returns or sets the user defined ply failure theory override 2 More...
Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder [get]
	Returns the preview builder subobject. More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...
unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...
unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...
unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...
unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...
unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a NXOpen.CAE.LaminateSpreadsheetReport builder

There is no kf creator.

Created in NX8.0.0

Member Enumeration Documentation

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.CoordinateSystemType

Coordinate system to use for ply stresses, ply failure indices, ply strength ratios and ply margins of safety calculation.

Enumerator
Ply	Ply coordinate system
Laminate	Laminate coordinate system

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.ElemNodalOptionType

Element-Nodal option

Enumerator
Elemental	Average element-nodal results per element
Nodal	Keep element-nodal results

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule

Result enveloping rules.

When there is more than one solutions or loadcases, defines which result to keep and display in the graphical report

Enumerator
MaxMin	Keep minimum and maximum values
Min	Keep minimum values
Max	Keep maximum values
AbsMax	Keep maximum absolute values
AbsMin	Keep minimum absolute values

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.FailureModeType

Failure indices mode.

NXLC can compute in-plane ply failure indices and/or interlaminar failure indices

Enumerator
InPlanePly	Ply failure index
Interlaminar	Bonding failure index
Both	Both failure index type

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.FilteringType

Filtering rule for the spreadsheet post report

Enumerator
None	Don't filter any values
StressXX	Filter values based on Stress XX component
StressYY	Filter values based on Stress YY component
StressZZ	Filter values based on Stress ZZ component
StressXY	Filter values based on Stress XY component
StressZX	Filter values based on Stress ZX component
StressYZ	Filter values based on Stress YZ component
StressMaxP	Filter values based on the maximum principal stress
StressMinP	Filter values based on the minimum principal stress
StressMaxS	Filter values based on the maximum shear stress
StressVonMises	Filter values based on the von mises stress
StrainXX	Filter values based on Strain XX component
StrainYY	Filter values based on Strain YY component
StrainZZ	Filter values based on Strain ZZ component
StrainXY	Filter values based on Strain XY component
StrainZX	Filter values based on Strain ZX component
StrainYZ	Filter values based on Strain YZ component
StrainMaxP	Filter values based on the maximum principal strain
StrainMinP	Filter values based on the minimum principal strain
StrainMaxS	Filter values based on the maximum shear strain
StrainVonMises	Filter values based on the von mises strain
PlyFailureIndex	Filter values based on the ply failure index
PlyStrengthRatio	Filter values based on the ply strength ratio
PlyMarginofSafety	Filter values based on the ply margin of safety
BondFailureIndex	Filter values based on the bonding failure index
BondStrengthRatio	Filter values based on the bonding strength ratio
BondMarginofSafety	Filter values based on the bonding margin of safety

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverInputType

Solver input type

Enumerator
ShellStress	Use the solver shell stress resultants
PlyStress	Use the solver ply stresses

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortingType

Sorting rule for the spreadsheet post report

Enumerator
ElementId	Sort results using the element id
PlyId	Sort results using the ply id
StressXX	Sort results using the stress XX component
StressYY	Sort results using the stress YY component
StressZZ	Sort results using the stress ZZ component
StressXY	Sort results using the stress XY component
StressZX	Sort results using the stress ZX component
StressYZ	Sort results using the stress YZ component
StressMaxP	Sort results using the maximum principal stress
StressMinP	Sort results using the minimum principal stress
StressMaxS	Sort results using the maximum shear stress
StressVonMises	Sort results using the VON MISES stress
StrainXX	Sort results using the strain XX component
StrainYY	Sort results using the strain XX component
StrainZZ	Sort results using the strain XX component
StrainXY	Sort results using the strain XX component
StrainZX	Sort results using the strain XX component
StrainYZ	Sort results using the strain XX component
StrainMaxP	Sort results using the maximum principal strain
StrainMinP	Sort results using the minimum principal strain
StrainMaxS	Sort results using the maximum shear strain
StrainVonMises	Sort results using the von mises strain
PlyFailureIndex	Sort results based on the ply failure index
PlyStrengthRatio	Sort results based on the ply strength ratio
PlyMarginofSafety	Sort results based on the ply margin of safety
BondFailureIndex	Sort results based on the bonding failure index
BondStrengthRatio	Sort results based on the bonding strength ratio
BondMarginofSafety	Sort results based on the bonding margin of safety

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortOrderType

Sorting order : acending or descending

Enumerator
Ascending	Sort ascending
Descending	Sort descending

enum NXOpen.CAE.LaminateSpreadsheetReportBuilder.ThreshType

The type of threshold used to filter results.

Enumerator
AboveTreshold	Filter out results above the specified value
BelowTreshold	Filter out results below the specified value

Property Documentation

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.AbsValueFilter

getset

Returns or sets the absolute value filtering option

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.AbsValueSort

getset

Returns or sets the absolute value sorting option

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.DetailedOutput

getset

Returns or sets the detailed output display

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateElementFilterBuilder NXOpen.CAE.LaminateSpreadsheetReportBuilder.ElementFilter

get

Returns the element filter

Created in NX8.0.0

Deprecated in NX1847.0.0. Use NXOpen.CAE.LaminateSpreadsheetReportBuilder.ReportObject instead.

License requirements: None.

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.ElemNodalOptionType NXOpen.CAE.LaminateSpreadsheetReportBuilder.ElemNodalOption

getset

Returns or sets the solver input

Created in NX10.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.FailureIndex

getset

Returns or sets the failure index

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule NXOpen.CAE.LaminateSpreadsheetReportBuilder.FailureIndexRule

getset

Returns or sets the failure index summary table enveloping rule

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.FailureModeType NXOpen.CAE.LaminateSpreadsheetReportBuilder.FailureMode

getset

Returns or sets the failure mode

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.FilteringType NXOpen.CAE.LaminateSpreadsheetReportBuilder.FilterType

getset

Returns or sets the filter type to use for detailed output

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminatePly.InterLaminarFailureTheoryType NXOpen.CAE.LaminateSpreadsheetReportBuilder.InterLamFTOverride1

getset

Returns or sets the Interlaminar fialure theory override 1

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.InterLamFTOverride1State

getset

Returns or sets the interlaminare fialure theory override 1 state

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminatePly.InterLaminarFailureTheoryType NXOpen.CAE.LaminateSpreadsheetReportBuilder.InterLamFTOverride2

getset

Returns or sets the Interlaminar fialure theory override 2

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.InterLamFTOverride2State

getset

Returns or sets the interlaminare fialure theory override 2 state

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe string NXOpen.CAE.LaminateSpreadsheetReportBuilder.Name

getset

Returns or sets the name of the spreadsheet report

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyBottom

getset

Returns or sets the state of the ply stress calculation at the bottom of each ply

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminatePlyFilterBuilder NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyFilter

get

Returns the ply filter

Created in NX8.0.0

Deprecated in NX1847.0.0. Use NXOpen.CAE.LaminateSpreadsheetReportBuilder.ReportObject instead.

License requirements: None.

unsafe NXOpen.CAE.LaminatePly.PlyFailureTheoryType NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyFTOverride1

getset

Returns or sets the ply fialure theory override 1

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyFTOverride1State

getset

Returns or sets the ply fialure theory override 1 state

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminatePly.PlyFailureTheoryType NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyFTOverride2

getset

Returns or sets the ply fialure theory override 2

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyFTOverride2State

getset

Returns or sets the ply fialure theory override 2 state

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyMiddle

getset

Returns or sets the state of the ply stress calculation at the middle of each ply

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStrainOutput

getset

Returns or sets the ply strains output control

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStrainRule

getset

Returns or sets the ply strains summary table enveloping rule

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.CoordinateSystemType NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressCoordSys

getset

Returns or sets the ply stresses and strains coordinate system

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressMaxP

getset

Returns or sets the ply maximum principal stress and/or strain

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressMaxS

getset

Returns or sets the ply maximum shear stress and/or strain

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressMinP

getset

Returns or sets the ply minimum principal stress and/or strain

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressOutput

getset

Returns or sets the ply stresses output control

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressRule

getset

Returns or sets the ply stresses summary table enveloping rule

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressXX

getset

Returns or sets the ply stress and/or strain XX component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressXY

getset

Returns or sets the ply stress and/or strain XY component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressYY

getset

Returns or sets the ply stress and/or strain YY component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressYZ

getset

Returns or sets the ply stress and/or strain YZ component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressZX

getset

Returns or sets the ply stress and/or strain ZX component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyStressZZ

getset

Returns or sets the ply stress and/or strain ZZ component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyTop

getset

Returns or sets the state of the ply stress calculation at the top of each ply

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.PlyVonMises

getset

Returns or sets the ply Von Mises stress and/or strain

Created in NX1899.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateReportObject NXOpen.CAE.LaminateSpreadsheetReportBuilder.ReportObject

getset

Returns or sets the report object

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe double NXOpen.CAE.LaminateSpreadsheetReportBuilder.SafetyFactor

getset

Returns or sets the safety factor

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.SafetyMargin

getset

Returns or sets the margin of safety

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule NXOpen.CAE.LaminateSpreadsheetReportBuilder.SafetyMarginRule

getset

Returns or sets the strength ratio summary table enveloping rule

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantFx

getset

Returns or sets the shell stress resultant Fx component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantFxy

getset

Returns or sets the shell stress resultant Fxy component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantFy

getset

Returns or sets the shell stress resultant Fy component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantMx

getset

Returns or sets the shell stress resultant Mx component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantMxy

getset

Returns or sets the shell stress resultant Mxy component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantMy

getset

Returns or sets the shell stress resultant My component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantQx

getset

Returns or sets the shell stress resultant Qx component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.ShellResultantQy

getset

Returns or sets the shell stress resultant Qy component

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverInputType NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverInput

getset

Returns or sets the solver input

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverPlyStress

getset

Returns or sets the solver ply stresses

Created in NX8.0.0

Deprecated in NX9.0.0. Use NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverInput instead.

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverShellResultant

getset

Returns or sets the solver shell stress resultant

Created in NX8.0.0

Deprecated in NX9.0.0. Use NXOpen.CAE.LaminateSpreadsheetReportBuilder.SolverInput instead.

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortOrderType NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortOrder

getset

Returns or sets the sorting order

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortingType NXOpen.CAE.LaminateSpreadsheetReportBuilder.SortType

getset

Returns or sets the sorting criteria

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe bool NXOpen.CAE.LaminateSpreadsheetReportBuilder.StrengthRatio

getset

Returns or sets the strength ratio

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.EnvelopeRule NXOpen.CAE.LaminateSpreadsheetReportBuilder.StrengthRatioRule

getset

Returns or sets the strength ratio summary table enveloping rule

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe NXOpen.CAE.LaminateSpreadsheetReportBuilder.ThreshType NXOpen.CAE.LaminateSpreadsheetReportBuilder.ThresholdType

getset

Returns or sets the filtering threshold type

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe double NXOpen.CAE.LaminateSpreadsheetReportBuilder.ThresholdValue

getset

Returns or sets the filtering threshold value

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_composites ("Laminate Composites")

unsafe string NXOpen.CAE.LaminateSpreadsheetReportBuilder.UserDefinedInterLamFTOverride1

getset

Returns or sets the user defined interLam failure theory override 1

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_comp_adv ("Laminate Composites Advanced")

unsafe string NXOpen.CAE.LaminateSpreadsheetReportBuilder.UserDefinedInterLamFTOverride2

getset

Returns or sets the user defined interLam failure theory override 2

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_comp_adv ("Laminate Composites Advanced")

unsafe string NXOpen.CAE.LaminateSpreadsheetReportBuilder.UserDefinedPlyFTOverride1

getset

Returns or sets the user defined ply failure theory override 1

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_comp_adv ("Laminate Composites Advanced")

unsafe string NXOpen.CAE.LaminateSpreadsheetReportBuilder.UserDefinedPlyFTOverride2

getset

Returns or sets the user defined ply failure theory override 2

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: nx_lam_comp_adv ("Laminate Composites Advanced")

---

The documentation for this class was generated from the following file:

• CAE_LaminateSpreadsheetReportBuilder.cs