Represents NXOpen.CAE.ImportSimulationBuilder More...

Inheritance diagram for NXOpen.CAE.ImportSimulationBuilder:

Public Member Functions
unsafe void	SetConditionSequences (NXOpen.CAE.SimConditionSequence[] sequences)
	Set Condition Sequences to import More...

unsafe void	SetConstraints (NXOpen.CAE.SimConstraint[] constraints)
	Set selected constraints to import More...

unsafe void	SetDofSets (NXOpen.CAE.CaeDOFSet[] dofsets)
	Set DOF sets to import More...

unsafe void	SetFields (NXOpen.Fields.Field[] fields)
	Set fields to import More...

unsafe void	SetGroups (NXOpen.CAE.CaeGroup[] groups)
	Set groups to import More...

unsafe void	SetIdOffset (int idOffset)
	Set id offset More...

unsafe void	SetImportAll (bool importAll)
	Set import all entities More...

unsafe void	SetLayoutStates (NXOpen.CAE.LayoutState[] layoutStates)
	Set Layout States to import More...

unsafe void	SetLoads (NXOpen.CAE.SimLoad[] loads)
	Set selected loads to import More...

unsafe void	SetMaterials (NXOpen.PhysicalMaterial[] materials)
	Set materials to import More...

unsafe void	SetModelingObjects (NXOpen.CAE.ModelingObjectPropertyTable[] modelingobjects)
	Set modeling objects to import More...

unsafe void	SetPhysicalPropertyTables (NXOpen.CAE.PhysicalPropertyTable[] propertytables)
	Set physical property tables to import More...

unsafe void	SetPrependString (string prependString)
	Set prepend string More...

unsafe void	SetRegions (NXOpen.CAE.CaeRegion[] regions)
	Set regions to import More...

unsafe void	SetResultProbes (NXOpen.CAE.ResultProbe[] resProbes)
	Set Result Probes to import More...

unsafe void	SetSelectionRecipes (NXOpen.CAE.SelectionRecipe[] selectionRecipes)
	Set Selection Recipes to import More...

unsafe void	SetSimulationObjects (NXOpen.CAE.SimSimulationObject[] simobjects)
	Set simulation objects to import More...

unsafe void	SetSolutions (NXOpen.CAE.SimSolution[] solutions)
	Set solutions to import More...

unsafe void	SetSourceSimPart (NXOpen.CAE.SimPart tPart)
	Set source simulation part More...

unsafe void	SetTargetFemoccs (NXOpen.CAE.FEModelOccurrence[] selectedFemoccs)
	Set FeModel Occurrences to import onto More...

unsafe void	SetTargetSolution (NXOpen.CAE.SimSolution targetSolTag)
	Set target Solution for Probe More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Detailed Description

Represents NXOpen.CAE.ImportSimulationBuilder

To create a new instance of this class, use NXOpen.CAE.SimPart.CreateImportSimBuilder

Created in NX11.0.0

Member Function Documentation

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetConditionSequences ( NXOpen.CAE.SimConditionSequence[] sequences )

inline

Set Condition Sequences to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

sequences Condition Sequences to import NXOpen.CAE.SimConditionSequence

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetConstraints ( NXOpen.CAE.SimConstraint[] constraints )

inline

Set selected constraints to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

constraints Constraints to import NXOpen.CAE.SimConstraint

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetDofSets ( NXOpen.CAE.CaeDOFSet[] dofsets )

inline

Set DOF sets to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

dofsets DOF sets to import NXOpen.CAE.CaeDOFSet

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetFields ( NXOpen.Fields.Field[] fields )

inline

Set fields to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

fields Fields to import NXOpen.Fields.Field

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetGroups ( NXOpen.CAE.CaeGroup[] groups )

inline

Set groups to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

groups Groups to import NXOpen.CAE.CaeGroup

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetIdOffset ( int idOffset )

inline

Set id offset

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

idOffset id offset

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetImportAll ( bool importAll )

inline

Set import all entities

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

importAll

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetLayoutStates ( NXOpen.CAE.LayoutState[] layoutStates )

inline

Set Layout States to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

layoutStates Layout states to import NXOpen.CAE.LayoutState

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetLoads ( NXOpen.CAE.SimLoad[] loads )

inline

Set selected loads to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

loads Loads to import NXOpen.CAE.SimLoad

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetMaterials ( NXOpen.PhysicalMaterial[] materials )

inline

Set materials to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

materials Materials to import NXOpen.PhysicalMaterial

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetModelingObjects ( NXOpen.CAE.ModelingObjectPropertyTable[] modelingobjects )

inline

Set modeling objects to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

modelingobjects Modeling objects to import NXOpen.CAE.ModelingObjectPropertyTable

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetPhysicalPropertyTables ( NXOpen.CAE.PhysicalPropertyTable[] propertytables )

inline

Set physical property tables to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

propertytables Physical property tables to import NXOpen.CAE.PhysicalPropertyTable

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetPrependString ( string prependString )

inline

Set prepend string

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

prependString Prepend string

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetRegions ( NXOpen.CAE.CaeRegion[] regions )

inline

Set regions to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

regions Regions to import NXOpen.CAE.CaeRegion

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetResultProbes ( NXOpen.CAE.ResultProbe[] resProbes )

inline

Set Result Probes to import

Created in NX1899.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

resProbes Result Probes to import NXOpen.CAE.ResultProbe

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetSelectionRecipes ( NXOpen.CAE.SelectionRecipe[] selectionRecipes )

inline

Set Selection Recipes to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

selectionRecipes Selection Recipes to import NXOpen.CAE.SelectionRecipe

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetSimulationObjects ( NXOpen.CAE.SimSimulationObject[] simobjects )

inline

Set simulation objects to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

simobjects Simulation objects to import NXOpen.CAE.SimSimulationObject

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetSolutions ( NXOpen.CAE.SimSolution[] solutions )

inline

Set solutions to import

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

solutions Solutions to import NXOpen.CAE.SimSolution

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetSourceSimPart ( NXOpen.CAE.SimPart tPart )

inline

Set source simulation part

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

tPart sim part

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetTargetFemoccs ( NXOpen.CAE.FEModelOccurrence[] selectedFemoccs )

inline

Set FeModel Occurrences to import onto

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

selectedFemoccs Array of FeModelOccurrences to import onto NXOpen.CAE.FEModelOccurrence

unsafe void NXOpen.CAE.ImportSimulationBuilder.SetTargetSolution ( NXOpen.CAE.SimSolution targetSolTag )

inline

Set target Solution for Probe

Created in NX1899.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

targetSolTag Target Solution for probe NXOpen.CAE.SimSolution

The documentation for this class was generated from the following file:

CAE_ImportSimulationBuilder.cs

Public Member Functions

Additional Inherited Members

Detailed Description

Member Function Documentation