NXOpen.Annotations.DraftingDatumTarget Class Reference

Represents a datum target More...

Inheritance diagram for NXOpen.Annotations.DraftingDatumTarget:

Public Member Functions
unsafe NXOpen.Annotations.ArbitraryTarget	ConvertToAreaTarget ()
	Converts a datum target point, line, or non-rectangular area to a rectangular area. More...
unsafe NXOpen.Annotations.DraftingArbitraryTarget	ConvertToDraftingAreaTarget ()
	Converts a drafting datum target point, line, or non-rectangular area to a drafting rectangular area. More...
unsafe NXOpen.Annotations.DraftingLineTarget	ConvertToDraftingLineTarget ()
	Converts a drafting datum target point or area to a drafting datum target line. More...
unsafe NXOpen.Annotations.DraftingPointTarget	ConvertToDraftingPointTarget ()
	Converts a drafting datum target line or area to a drafting datum target point. More...
unsafe NXOpen.Annotations.LineTarget	ConvertToLineTarget ()
	Converts a datum target point or area to a datum target line. More...
unsafe NXOpen.Annotations.PointTarget	ConvertToPointTarget ()
	Converts a datum target line or area to a datum target point. More...

Additional Inherited Members
Public Types inherited from NXOpen.DisplayableObject
enum	ObjectFont {   Solid = 1, Dashed, Phantom, Centerline,   Dotted, LongDashed, DottedDashed, Eight = 11,   Nine, Ten, Eleven }
	specifies the object font for objects such as lines More...
enum	ObjectWidth {   Normal, Thick, Thin, One = 5,   Two, Three, Four, Five,   Six, Seven, Eight, Nine }
	specifies object width for objects such as lines and text More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...
Properties inherited from NXOpen.Annotations.BaseDatumTarget
unsafe string	DatumLabel [get, set]
	Returns or sets the datum target label. More...
unsafe int	TargetIndex [get, set]
	Returns or sets the datum target index. More...

Detailed Description

Represents a datum target

To create or edit an instance of this class, use NXOpen.Annotations.DraftingDatumTargetBuilder

Created in NX5.0.0

Member Function Documentation

unsafe NXOpen.Annotations.ArbitraryTarget NXOpen.Annotations.DraftingDatumTarget.ConvertToAreaTarget ( )

inline

Converts a datum target point, line, or non-rectangular area to a rectangular area.

NOTE: This method should not be used to edit a read-only object such as a Mirrored PMI object. If it is, the changes will be overridden when the part is updated.

Created in NX5.0.0

License requirements: geometric_tol ("GDT")

Returns

New rectangulartarget

unsafe NXOpen.Annotations.DraftingArbitraryTarget NXOpen.Annotations.DraftingDatumTarget.ConvertToDraftingAreaTarget ( )

inline

Converts a drafting datum target point, line, or non-rectangular area to a drafting rectangular area.

NOTE: This method should not be used to edit a read-only object such as a Mirrored PMI object. If it is, the changes will be overridden when the part is updated.

Created in NX5.0.0

License requirements: drafting ("DRAFTING")

Returns

New rectangulartarget

unsafe NXOpen.Annotations.DraftingLineTarget NXOpen.Annotations.DraftingDatumTarget.ConvertToDraftingLineTarget ( )

inline

Converts a drafting datum target point or area to a drafting datum target line.

NOTE: This method should not be used to edit a read-only object such as a Mirrored PMI object. If it is, the changes will be overridden when the part is updated.

Created in NX5.0.0

License requirements: drafting ("DRAFTING")

Returns

New line target

unsafe NXOpen.Annotations.DraftingPointTarget NXOpen.Annotations.DraftingDatumTarget.ConvertToDraftingPointTarget ( )

inline

Converts a drafting datum target line or area to a drafting datum target point.

NOTE: This method should not be used to edit a read-only object such as a Mirrored PMI object. If it is, the changes will be overridden when the part is updated.

Created in NX5.0.0

License requirements: drafting ("DRAFTING")

Returns

New point target

unsafe NXOpen.Annotations.LineTarget NXOpen.Annotations.DraftingDatumTarget.ConvertToLineTarget ( )

inline

Converts a datum target point or area to a datum target line.

NOTE: This method should not be used to edit a read-only object such as a Mirrored PMI object. If it is, the changes will be overridden when the part is updated.

Created in NX5.0.0

License requirements: geometric_tol ("GDT")

Returns

New line target

unsafe NXOpen.Annotations.PointTarget NXOpen.Annotations.DraftingDatumTarget.ConvertToPointTarget ( )

inline

Converts a datum target line or area to a datum target point.

NOTE: This method should not be used to edit a read-only object such as a Mirrored PMI object. If it is, the changes will be overridden when the part is updated.

Created in NX5.0.0

License requirements: geometric_tol ("GDT")

Returns

New point target

---

The documentation for this class was generated from the following file:

• Annotations_DraftingDatumTarget.cs