Contains wrappers for all 'UF_SO' functions and data types. More...

Inheritance diagram for NXOpen.UF.UFSo:

Classes
struct	_SplineData

struct	DirrOnSurfData
	Wrapper for UF_SO_dirr_on_surf_data_s More...

struct	OffsetCurveCvtrData
	Wrapper for UF_SO_offset_curve_cvtr_data_s More...

struct	OffsetSurfCvtrData
	Wrapper for UF_SO_offset_surf_cvtr_data_s More...

struct	SplineData
	Wrapper for UF_SO_spline_data_s More...

Public Types
enum	DirrOnCurveOption
	Wrapper for UF_SO_dirr_on_curve_option_e More...

enum	PointAlongCurveOption
	Wrapper for UF_SO_point_along_curve_option_e More...

enum	ScalarDimOption
	Wrapper for UF_SO_scalar_dim_option_e More...

enum	UpdateOption
	Wrapper for UF_SO_update_option_e More...

enum	VisibilityOption
	Wrapper for UF_SO_visibility_option_e More...

Public Member Functions
unsafe void	Ask3ScalarsOfPoint (NXOpen.Tag so_point, out NXOpen.Tag[] scalars)
	Wrapper method for UF_SO_ask_3_scalars_of_point More...

void	AskAssyCtxtPartOcc (NXOpen.Tag assy_context_xform, NXOpen.Tag to_part_occ, out NXOpen.Tag from_part_occ)
	Wrapper method for UF_SO_ask_assy_ctxt_part_occ More...

unsafe void	AskChildren (NXOpen.Tag _object, int options, out int n_children, out NXOpen.Tag[] children)
	Wrapper method for UF_SO_ask_children More...

void	AskDirectionOfAxis (NXOpen.Tag axis,[Out] double[] direction)
	Wrapper method for UF_SO_ask_direction_of_axis More...

void	AskDirectionOfDirr (NXOpen.Tag direction,[Out] double[] dir)
	Wrapper method for UF_SO_ask_direction_of_dirr More...

void	AskDirrOnSurf (NXOpen.Tag direction, out DirrOnSurfData dirr_on_surf_data)
	Wrapper method for UF_SO_ask_dirr_on_surf More...

void	AskDisplayMarkerOfPoint (NXOpen.Tag point, out UFDisp.PolyMarker disp_marker)
	Wrapper method for UF_SO_ask_display_marker_of_point More...

void	AskDoubleOfScalar (NXOpen.Tag scalar, out double dbl)
	Wrapper method for UF_SO_ask_double_of_scalar More...

void	AskExpOfScalar (NXOpen.Tag scalar, out NXOpen.Tag exp)
	Wrapper method for UF_SO_ask_exp_of_scalar More...

void	AskMatrixOfXform (NXOpen.Tag xform,[Out] double[] matrix)
	Wrapper method for UF_SO_ask_matrix_of_xform More...

void	AskOffsetCurveCvtr (NXOpen.Tag curvature, out OffsetCurveCvtrData offset_curve_cvtr_data)
	Wrapper method for UF_SO_ask_offset_curve_cvtr More...

void	AskOffsetOfOffset (NXOpen.Tag offset,[Out] double[] offset_vec)
	Wrapper method for UF_SO_ask_offset_of_offset More...

void	AskOffsetSurfCvtr (NXOpen.Tag curvature, out OffsetSurfCvtrData offset_surf_cvtr_data)
	Wrapper method for UF_SO_ask_offset_surf_cvtr More...

unsafe void	AskParents (NXOpen.Tag so, int options, out int n_parents, out NXOpen.Tag[] parents)
	Wrapper method for UF_SO_ask_parents More...

void	AskParentStatus (NXOpen.Tag so, out int parent_status)
	Wrapper method for UF_SO_ask_parent_status More...

void	AskPointOfAxis (NXOpen.Tag axis,[Out] double[] point)
	Wrapper method for UF_SO_ask_point_of_axis More...

void	AskPointOfXform (NXOpen.Tag xform,[Out] double[] point)
	Wrapper method for UF_SO_ask_point_of_xform More...

void	AskScaleOfXform (NXOpen.Tag xform, out double scale)
	Wrapper method for UF_SO_ask_scale_of_xform More...

unsafe void	AskSpline (NXOpen.Tag spline, out SplineData spline_data)
	Wrapper method for UF_SO_ask_spline More...

void	AskUpdateErrorCode (NXOpen.Tag so, out int update_error_code)
	Wrapper method for UF_SO_ask_update_error_code More...

void	AskVisibilityOption (NXOpen.Tag so, out VisibilityOption visibility_option)
	Wrapper method for UF_SO_ask_visibility_option More...

void	AskXDirectionOfXform (NXOpen.Tag xform,[Out] double[] x_direction)
	Wrapper method for UF_SO_ask_x_direction_of_xform More...

void	AskYDirectionOfXform (NXOpen.Tag xform,[Out] double[] y_direction)
	Wrapper method for UF_SO_ask_y_direction_of_xform More...

void	AskZDirectionOfXform (NXOpen.Tag xform,[Out] double[] z_direction)
	Wrapper method for UF_SO_ask_z_direction_of_xform More...

void	CreateArcCenter2Pnts (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] points, out NXOpen.Tag arc)
	Wrapper method for UF_SO_create_arc_center_2_pnts More...

void	CreateArcRadiusAngles (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag xform, NXOpen.Tag radius, NXOpen.Tag[] angles, out NXOpen.Tag arc)
	Wrapper method for UF_SO_create_arc_radius_angles More...

void	CreateArcThreePoints (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] points, out NXOpen.Tag arc)
	Wrapper method for UF_SO_create_arc_three_points More...

void	CreateArcXform2Points (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag xform, NXOpen.Tag[] points, out NXOpen.Tag arc)
	Wrapper method for UF_SO_create_arc_xform_2_points More...

void	CreateAxisDoubles (NXOpen.Tag object_in_part, UpdateOption update_option, double[] point, double[] direction, out NXOpen.Tag axis)
	Wrapper method for UF_SO_create_axis_doubles More...

void	CreateAxisExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag axis, NXOpen.Tag xform, out NXOpen.Tag axis2)
	Wrapper method for UF_SO_create_axis_extract More...

void	CreateAxisPointDir (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point, NXOpen.Tag direction, out NXOpen.Tag axis)
	Wrapper method for UF_SO_create_axis_point_dir More...

void	CreateBcurveThruPoints (UpdateOption update_option, int num_of_points, NXOpen.Tag[] points, ref double point_parameters, int degree, int periodic, NXOpen.Tag start_slope, NXOpen.Tag end_slope, int start_slope_type, int end_slope_type, out NXOpen.Tag bcurve)
	Wrapper method for UF_SO_create_bcurve_thru_points More...

void	CreateCurveExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag curve1, int type, int subtype, NXOpen.Tag xform, out NXOpen.Tag curve2)
	Wrapper method for UF_SO_create_curve_extract More...

void	CreateDirrAxisOfConic (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag conic, bool flip, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_axis_of_conic More...

void	CreateDirrDoubles (NXOpen.Tag object_in_part, UpdateOption update_option, double[] direction, out NXOpen.Tag dirr)
	Wrapper method for UF_SO_create_dirr_doubles More...

void	CreateDirrDoublesPnt (NXOpen.Tag object_in_part, UpdateOption update_option, double[] point, double[] direction, out NXOpen.Tag dirr)
	Wrapper method for UF_SO_create_dirr_doubles_pnt More...

void	CreateDirrExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag dir, NXOpen.Tag xform, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_extract More...

void	CreateDirrLine (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag line, bool flip, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_line More...

void	CreateDirrNormalToSurfacePoint (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag face, NXOpen.Tag point, bool flip, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_normal_to_surface_point More...

void	CreateDirrOnCurve (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag curve, NXOpen.Tag t, DirrOnCurveOption option, bool flip, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_on_curve More...

void	CreateDirrOnSurf (NXOpen.Tag object_in_part, UpdateOption update_option, ref DirrOnSurfData dirr_on_surf_data, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_on_surf More...

void	CreateDirrPlane (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag plane, bool flip, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_plane More...

void	CreateDirrSurfaceAxis (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag conic, bool flip, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_surface_axis More...

void	CreateDirrTwoDirs (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] directions, out NXOpen.Tag direction)
	Wrapper method for UF_SO_create_dirr_two_dirs More...

void	CreateDirrTwoPoints (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] points, out NXOpen.Tag dirr)
	Wrapper method for UF_SO_create_dirr_two_points More...

void	CreateLineTwoPoints (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] points, out NXOpen.Tag line)
	Wrapper method for UF_SO_create_line_two_points More...

void	CreateOffset3Scalars (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] xyz, out NXOpen.Tag offset)
	Wrapper method for UF_SO_create_offset_3_scalars More...

void	CreateOffsetCurveCvtr (NXOpen.Tag object_in_part, UpdateOption update_option, ref OffsetCurveCvtrData offset_curve_cvtr_data, out NXOpen.Tag curvature)
	Wrapper method for UF_SO_create_offset_curve_cvtr More...

void	CreateOffsetCylindrical (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag radius, NXOpen.Tag angle, NXOpen.Tag zdelta, out NXOpen.Tag offset)
	Wrapper method for UF_SO_create_offset_cylindrical More...

void	CreateOffsetDirDist (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag direction, NXOpen.Tag distance, out NXOpen.Tag offset)
	Wrapper method for UF_SO_create_offset_dir_dist More...

void	CreateOffsetDouble (NXOpen.Tag object_in_part, UpdateOption update_option, double[] offset1, out NXOpen.Tag offset2)
	Wrapper method for UF_SO_create_offset_double More...

void	CreateOffsetDoublePnt (NXOpen.Tag object_in_part, UpdateOption update_option, double[] point, double[] offset1, out NXOpen.Tag offset2)
	Wrapper method for UF_SO_create_offset_double_pnt More...

void	CreateOffsetExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag offset1, NXOpen.Tag xform, out NXOpen.Tag offset2)
	Wrapper method for UF_SO_create_offset_extract More...

void	CreateOffsetSpherical (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag radius, NXOpen.Tag angle1, NXOpen.Tag angle2, out NXOpen.Tag offset)
	Wrapper method for UF_SO_create_offset_spherical More...

void	CreateOffsetSurfCvtr (NXOpen.Tag object_in_part, UpdateOption update_option, ref OffsetSurfCvtrData offset_surf_cvtr_data, out NXOpen.Tag curvature)
	Wrapper method for UF_SO_create_offset_surf_cvtr More...

void	CreatePoint3Scalars (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] xyz, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_3_scalars More...

void	CreatePoint3ScalarsCsys (NXOpen.Tag object_in_part, NXOpen.Tag csys_tag, NXOpen.Tag[] xyz, UpdateOption update_option, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_3_scalars_csys More...

void	CreatePointAlongCurve (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag curve, NXOpen.Tag point1, NXOpen.Tag t, PointAlongCurveOption option, bool flip, out NXOpen.Tag point2)
	Wrapper method for UF_SO_create_point_along_curve More...

void	CreatePointConicCenter (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag conic, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_conic_center More...

void	CreatePointExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point1, NXOpen.Tag xform, out NXOpen.Tag point2)
	Wrapper method for UF_SO_create_point_extract More...

void	CreatePointExtractWithDispMarker (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point1, NXOpen.Tag xform, UFDisp.PolyMarker disp_marker, out NXOpen.Tag point2)
	Wrapper method for UF_SO_create_point_extract_with_disp_marker More...

void	CreatePointOffset (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag base_point, NXOpen.Tag offset, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_offset More...

void	CreatePointOnArcAngle (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag arc, NXOpen.Tag angle, NXOpen.Tag xform, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_on_arc_angle More...

void	CreatePointOnAxis (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag ref_point, NXOpen.Tag axis, out NXOpen.Tag point_on_axis)
	Wrapper method for UF_SO_create_point_on_axis More...

void	CreatePointOnCurve (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag curve, NXOpen.Tag t, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_on_curve More...

void	CreatePointOnSurface (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag face, NXOpen.Tag u, NXOpen.Tag v, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_on_surface More...

void	CreatePointSurfaceCrv (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag face, NXOpen.Tag curve, NXOpen.Tag help_point1, NXOpen.Tag help_point2, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_surface_crv More...

void	CreatePointTwoCurves (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag curve1, NXOpen.Tag curve2, NXOpen.Tag help_point1, NXOpen.Tag help_point2, out NXOpen.Tag point)
	Wrapper method for UF_SO_create_point_two_curves More...

void	CreateScalarDist2Pnts (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag[] points, out NXOpen.Tag scalar)
	Wrapper method for UF_SO_create_scalar_dist_2_pnts More...

void	CreateScalarDouble (NXOpen.Tag object_in_part, UpdateOption update_option, double dbl, out NXOpen.Tag scalar)
	Wrapper method for UF_SO_create_scalar_double More...

void	CreateScalarDoubleDim (NXOpen.Tag object_in_part, UpdateOption update_option, double dbl, ScalarDimOption dim, out NXOpen.Tag scalar)
	Wrapper method for UF_SO_create_scalar_double_dim More...

void	CreateScalarExp (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag exp, out NXOpen.Tag scalar)
	Wrapper method for UF_SO_create_scalar_exp More...

void	CreateScalarExpDim (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag exp, ScalarDimOption dim, out NXOpen.Tag scalar)
	Wrapper method for UF_SO_create_scalar_exp_dim More...

void	CreateScalarExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag scalar1, NXOpen.Tag scale, out NXOpen.Tag scalar2)
	Wrapper method for UF_SO_create_scalar_extract More...

void	CreateScalarExtractDim (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag scalar1, NXOpen.Tag scale, ScalarDimOption dim, out NXOpen.Tag scalar2)
	Wrapper method for UF_SO_create_scalar_extract_dim More...

void	CreateScalarLengthCrv (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag curve, out NXOpen.Tag scalar)
	Wrapper method for UF_SO_create_scalar_length_crv More...

unsafe void	CreateSpline (UpdateOption update_option, ref SplineData spline_data, out NXOpen.Tag spline)
	Wrapper method for UF_SO_create_spline More...

void	CreateXformAssyCtxt (NXOpen.Tag object_in_part, NXOpen.Tag from_part_occ, NXOpen.Tag to_part_occ, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_assy_ctxt More...

void	CreateXformDoubles (NXOpen.Tag object_in_part, UpdateOption update_option, double[] point, double[] x_direction, double[] y_direction, double scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_doubles More...

void	CreateXformExtract (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag xform1, NXOpen.Tag xform2, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_extract More...

void	CreateXformOffsetXform (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag csys, NXOpen.Tag point0, NXOpen.Tag point1, NXOpen.Tag[] rot_scalar_tags, NXOpen.Tag scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_offset_xform More...

void	CreateXformPntXyDirs (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point, NXOpen.Tag x_direction, NXOpen.Tag y_direction, NXOpen.Tag scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_pnt_xy_dirs More...

void	CreateXformPntXzDirs (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point, NXOpen.Tag x_direction, NXOpen.Tag z_direction, NXOpen.Tag scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_pnt_xz_dirs More...

void	CreateXformPntYzDirs (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point, NXOpen.Tag y_direction, NXOpen.Tag z_direction, NXOpen.Tag scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_pnt_yz_dirs More...

void	CreateXformThreePlanes (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag plane0, NXOpen.Tag plane1, NXOpen.Tag plane2, NXOpen.Tag scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_three_planes More...

void	CreateXformThreePoints (NXOpen.Tag object_in_part, UpdateOption update_option, NXOpen.Tag point0, NXOpen.Tag point1, NXOpen.Tag point2, NXOpen.Tag scale, out NXOpen.Tag xform)
	Wrapper method for UF_SO_create_xform_three_points More...

void	DeleteNonDeletables (NXOpen.Tag part)
	Wrapper method for UF_SO_delete_non_deletables More...

void	DeleteParms (NXOpen.Tag so)
	Wrapper method for UF_SO_delete_parms More...

void	Display (NXOpen.Tag so, int view_option, int color_option, int color)
	Wrapper method for UF_SO_display More...

void	DisplayParents (NXOpen.Tag so, int view_option, int color_option, int color)
	Wrapper method for UF_SO_display_parents More...

void	HasBecomeDumb (NXOpen.Tag so, out bool has_become_dumb)
	Wrapper method for UF_SO_has_become_dumb More...

void	IsAssyCtxtXform (NXOpen.Tag xform, out bool is_assy_xform)
	Wrapper method for UF_SO_is_assy_ctxt_xform More...

void	IsOutOfDate (NXOpen.Tag so, out bool is_out_of_date)
	Wrapper method for UF_SO_is_out_of_date More...

void	IsSo (NXOpen.Tag candidate, out bool is_so)
	Wrapper method for UF_SO_is_so More...

void	IsSubclass (NXOpen.Tag candidate, out bool is_so)
	Wrapper method for UF_SO_is_subclass More...

void	ReplaceParms (NXOpen.Tag old_so, NXOpen.Tag new_so)
	Wrapper method for UF_SO_replace_parms More...

void	SetDirectionOfAxis (NXOpen.Tag axis, double[] new_direction)
	Wrapper method for UF_SO_set_direction_of_axis More...

void	SetDirectionOfDirr (NXOpen.Tag direction, double[] dir)
	Wrapper method for UF_SO_set_direction_of_dirr More...

void	SetDisplayMarkerOfPoint (NXOpen.Tag point, UFDisp.PolyMarker disp_marker)
	Wrapper method for UF_SO_set_display_marker_of_point More...

void	SetDoubleOfScalar (NXOpen.Tag scalar, double dbl)
	Wrapper method for UF_SO_set_double_of_scalar More...

void	SetOffsetOfOffset (NXOpen.Tag offset, double[] new_offset)
	Wrapper method for UF_SO_set_offset_of_offset More...

void	SetPointOfAxis (NXOpen.Tag axis, double[] new_point)
	Wrapper method for UF_SO_set_point_of_axis More...

void	SetPointOfXform (NXOpen.Tag xform, double[] point)
	Wrapper method for UF_SO_set_point_of_xform More...

void	SetScaleOfXform (NXOpen.Tag xform, double scale)
	Wrapper method for UF_SO_set_scale_of_xform More...

void	SetVisibilityOption (NXOpen.Tag so, VisibilityOption visibility_option)
	Wrapper method for UF_SO_set_visibility_option More...

void	SetXyDirectionOfXform (NXOpen.Tag xform, double[] x_direction, double[] y_direction)
	Wrapper method for UF_SO_set_xy_direction_of_xform More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.Utilities.NXRemotableObject
void	initialize ()
	<exclude> More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Detailed Description

Contains wrappers for all 'UF_SO' functions and data types.

Member Enumeration Documentation

enum NXOpen.UF.UFSo.DirrOnCurveOption

Wrapper for UF_SO_dirr_on_curve_option_e

Refer to UF_SO_dirr_on_curve_option_e for documentation

enum NXOpen.UF.UFSo.PointAlongCurveOption

Wrapper for UF_SO_point_along_curve_option_e

Refer to UF_SO_point_along_curve_option_e for documentation

enum NXOpen.UF.UFSo.ScalarDimOption

Wrapper for UF_SO_scalar_dim_option_e

Refer to UF_SO_scalar_dim_option_e for documentation

enum NXOpen.UF.UFSo.UpdateOption

Wrapper for UF_SO_update_option_e

Refer to UF_SO_update_option_e for documentation

enum NXOpen.UF.UFSo.VisibilityOption

Wrapper for UF_SO_visibility_option_e

Refer to UF_SO_visibility_option_e for documentation

Member Function Documentation

unsafe void NXOpen.UF.UFSo.Ask3ScalarsOfPoint	(	NXOpen.Tag	so_point,
		out NXOpen.Tag[]	scalars
	)

inline

Wrapper method for UF_SO_ask_3_scalars_of_point

Refer to UF_SO_ask_3_scalars_of_point for documentation

License requirements:None

void NXOpen.UF.UFSo.AskAssyCtxtPartOcc	(	NXOpen.Tag	assy_context_xform,
		NXOpen.Tag	to_part_occ,
		out NXOpen.Tag	from_part_occ
	)

inline

Wrapper method for UF_SO_ask_assy_ctxt_part_occ

Refer to UF_SO_ask_assy_ctxt_part_occ for documentation

License requirements:None

unsafe void NXOpen.UF.UFSo.AskChildren	(	NXOpen.Tag	_object,
		int	options,
		out int	n_children,
		out NXOpen.Tag[]	children
	)

inline

Wrapper method for UF_SO_ask_children

Refer to UF_SO_ask_children for documentation

License requirements:None

void NXOpen.UF.UFSo.AskDirectionOfAxis	(	NXOpen.Tag	axis,
		[Out] double[]	direction
	)

inline

Wrapper method for UF_SO_ask_direction_of_axis

Refer to UF_SO_ask_direction_of_axis for documentation

License requirements:None

void NXOpen.UF.UFSo.AskDirectionOfDirr	(	NXOpen.Tag	direction,
		[Out] double[]	dir
	)

inline

Wrapper method for UF_SO_ask_direction_of_dirr

Refer to UF_SO_ask_direction_of_dirr for documentation

License requirements:None

void NXOpen.UF.UFSo.AskDirrOnSurf	(	NXOpen.Tag	direction,
		out DirrOnSurfData	dirr_on_surf_data
	)

inline

Wrapper method for UF_SO_ask_dirr_on_surf

Refer to UF_SO_ask_dirr_on_surf for documentation

License requirements:None

void NXOpen.UF.UFSo.AskDisplayMarkerOfPoint	(	NXOpen.Tag	point,
		out UFDisp.PolyMarker	disp_marker
	)

inline

Wrapper method for UF_SO_ask_display_marker_of_point

Refer to UF_SO_ask_display_marker_of_point for documentation

License requirements:None

void NXOpen.UF.UFSo.AskDoubleOfScalar	(	NXOpen.Tag	scalar,
		out double	dbl
	)

inline

Wrapper method for UF_SO_ask_double_of_scalar

Refer to UF_SO_ask_double_of_scalar for documentation

License requirements:None

void NXOpen.UF.UFSo.AskExpOfScalar	(	NXOpen.Tag	scalar,
		out NXOpen.Tag	exp
	)

inline

Wrapper method for UF_SO_ask_exp_of_scalar

Refer to UF_SO_ask_exp_of_scalar for documentation

License requirements:None

void NXOpen.UF.UFSo.AskMatrixOfXform	(	NXOpen.Tag	xform,
		[Out] double[]	matrix
	)

inline

Wrapper method for UF_SO_ask_matrix_of_xform

Refer to UF_SO_ask_matrix_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.AskOffsetCurveCvtr	(	NXOpen.Tag	curvature,
		out OffsetCurveCvtrData	offset_curve_cvtr_data
	)

inline

Wrapper method for UF_SO_ask_offset_curve_cvtr

Refer to UF_SO_ask_offset_curve_cvtr for documentation

License requirements:None

void NXOpen.UF.UFSo.AskOffsetOfOffset	(	NXOpen.Tag	offset,
		[Out] double[]	offset_vec
	)

inline

Wrapper method for UF_SO_ask_offset_of_offset

Refer to UF_SO_ask_offset_of_offset for documentation

License requirements:None

void NXOpen.UF.UFSo.AskOffsetSurfCvtr	(	NXOpen.Tag	curvature,
		out OffsetSurfCvtrData	offset_surf_cvtr_data
	)

inline

Wrapper method for UF_SO_ask_offset_surf_cvtr

Refer to UF_SO_ask_offset_surf_cvtr for documentation

License requirements:None

unsafe void NXOpen.UF.UFSo.AskParents	(	NXOpen.Tag	so,
		int	options,
		out int	n_parents,
		out NXOpen.Tag[]	parents
	)

inline

Wrapper method for UF_SO_ask_parents

Refer to UF_SO_ask_parents for documentation

License requirements:None

void NXOpen.UF.UFSo.AskParentStatus	(	NXOpen.Tag	so,
		out int	parent_status
	)

inline

Wrapper method for UF_SO_ask_parent_status

Refer to UF_SO_ask_parent_status for documentation

License requirements:None

void NXOpen.UF.UFSo.AskPointOfAxis	(	NXOpen.Tag	axis,
		[Out] double[]	point
	)

inline

Wrapper method for UF_SO_ask_point_of_axis

Refer to UF_SO_ask_point_of_axis for documentation

License requirements:None

void NXOpen.UF.UFSo.AskPointOfXform	(	NXOpen.Tag	xform,
		[Out] double[]	point
	)

inline

Wrapper method for UF_SO_ask_point_of_xform

Refer to UF_SO_ask_point_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.AskScaleOfXform	(	NXOpen.Tag	xform,
		out double	scale
	)

inline

Wrapper method for UF_SO_ask_scale_of_xform

Refer to UF_SO_ask_scale_of_xform for documentation

License requirements:None

unsafe void NXOpen.UF.UFSo.AskSpline	(	NXOpen.Tag	spline,
		out SplineData	spline_data
	)

inline

Wrapper method for UF_SO_ask_spline

Refer to UF_SO_ask_spline for documentation

License requirements:None

void NXOpen.UF.UFSo.AskUpdateErrorCode	(	NXOpen.Tag	so,
		out int	update_error_code
	)

inline

Wrapper method for UF_SO_ask_update_error_code

Refer to UF_SO_ask_update_error_code for documentation

License requirements:None

void NXOpen.UF.UFSo.AskVisibilityOption	(	NXOpen.Tag	so,
		out VisibilityOption	visibility_option
	)

inline

Wrapper method for UF_SO_ask_visibility_option

Refer to UF_SO_ask_visibility_option for documentation

License requirements:None

void NXOpen.UF.UFSo.AskXDirectionOfXform	(	NXOpen.Tag	xform,
		[Out] double[]	x_direction
	)

inline

Wrapper method for UF_SO_ask_x_direction_of_xform

Refer to UF_SO_ask_x_direction_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.AskYDirectionOfXform	(	NXOpen.Tag	xform,
		[Out] double[]	y_direction
	)

inline

Wrapper method for UF_SO_ask_y_direction_of_xform

Refer to UF_SO_ask_y_direction_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.AskZDirectionOfXform	(	NXOpen.Tag	xform,
		[Out] double[]	z_direction
	)

inline

Wrapper method for UF_SO_ask_z_direction_of_xform

Refer to UF_SO_ask_z_direction_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateArcCenter2Pnts	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	points,
		out NXOpen.Tag	arc
	)

inline

Wrapper method for UF_SO_create_arc_center_2_pnts

Refer to UF_SO_create_arc_center_2_pnts for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateArcRadiusAngles	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	xform,
		NXOpen.Tag	radius,
		NXOpen.Tag[]	angles,
		out NXOpen.Tag	arc
	)

inline

Wrapper method for UF_SO_create_arc_radius_angles

Refer to UF_SO_create_arc_radius_angles for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateArcThreePoints	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	points,
		out NXOpen.Tag	arc
	)

inline

Wrapper method for UF_SO_create_arc_three_points

Refer to UF_SO_create_arc_three_points for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateArcXform2Points	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	xform,
		NXOpen.Tag[]	points,
		out NXOpen.Tag	arc
	)

inline

Wrapper method for UF_SO_create_arc_xform_2_points

Refer to UF_SO_create_arc_xform_2_points for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateAxisDoubles	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double[]	point,
		double[]	direction,
		out NXOpen.Tag	axis
	)

inline

Wrapper method for UF_SO_create_axis_doubles

Refer to UF_SO_create_axis_doubles for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateAxisExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	axis,
		NXOpen.Tag	xform,
		out NXOpen.Tag	axis2
	)

inline

Wrapper method for UF_SO_create_axis_extract

Refer to UF_SO_create_axis_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateAxisPointDir	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point,
		NXOpen.Tag	direction,
		out NXOpen.Tag	axis
	)

inline

Wrapper method for UF_SO_create_axis_point_dir

Refer to UF_SO_create_axis_point_dir for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateBcurveThruPoints	(	UpdateOption	update_option,
		int	num_of_points,
		NXOpen.Tag[]	points,
		ref double	point_parameters,
		int	degree,
		int	periodic,
		NXOpen.Tag	start_slope,
		NXOpen.Tag	end_slope,
		int	start_slope_type,
		int	end_slope_type,
		out NXOpen.Tag	bcurve
	)

inline

Wrapper method for UF_SO_create_bcurve_thru_points

Refer to UF_SO_create_bcurve_thru_points for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateCurveExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	curve1,
		int	type,
		int	subtype,
		NXOpen.Tag	xform,
		out NXOpen.Tag	curve2
	)

inline

Wrapper method for UF_SO_create_curve_extract

Refer to UF_SO_create_curve_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrAxisOfConic	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	conic,
		bool	flip,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_axis_of_conic

Refer to UF_SO_create_dirr_axis_of_conic for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrDoubles	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double[]	direction,
		out NXOpen.Tag	dirr
	)

inline

Wrapper method for UF_SO_create_dirr_doubles

Refer to UF_SO_create_dirr_doubles for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrDoublesPnt	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double[]	point,
		double[]	direction,
		out NXOpen.Tag	dirr
	)

inline

Wrapper method for UF_SO_create_dirr_doubles_pnt

Refer to UF_SO_create_dirr_doubles_pnt for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	dir,
		NXOpen.Tag	xform,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_extract

Refer to UF_SO_create_dirr_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrLine	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	line,
		bool	flip,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_line

Refer to UF_SO_create_dirr_line for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrNormalToSurfacePoint	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	face,
		NXOpen.Tag	point,
		bool	flip,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_normal_to_surface_point

Refer to UF_SO_create_dirr_normal_to_surface_point for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrOnCurve	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	curve,
		NXOpen.Tag	t,
		DirrOnCurveOption	option,
		bool	flip,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_on_curve

Refer to UF_SO_create_dirr_on_curve for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrOnSurf	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		ref DirrOnSurfData	dirr_on_surf_data,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_on_surf

Refer to UF_SO_create_dirr_on_surf for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrPlane	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	plane,
		bool	flip,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_plane

Refer to UF_SO_create_dirr_plane for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrSurfaceAxis	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	conic,
		bool	flip,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_surface_axis

Refer to UF_SO_create_dirr_surface_axis for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrTwoDirs	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	directions,
		out NXOpen.Tag	direction
	)

inline

Wrapper method for UF_SO_create_dirr_two_dirs

Refer to UF_SO_create_dirr_two_dirs for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateDirrTwoPoints	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	points,
		out NXOpen.Tag	dirr
	)

inline

Wrapper method for UF_SO_create_dirr_two_points

Refer to UF_SO_create_dirr_two_points for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateLineTwoPoints	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	points,
		out NXOpen.Tag	line
	)

inline

Wrapper method for UF_SO_create_line_two_points

Refer to UF_SO_create_line_two_points for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffset3Scalars	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	xyz,
		out NXOpen.Tag	offset
	)

inline

Wrapper method for UF_SO_create_offset_3_scalars

Refer to UF_SO_create_offset_3_scalars for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetCurveCvtr	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		ref OffsetCurveCvtrData	offset_curve_cvtr_data,
		out NXOpen.Tag	curvature
	)

inline

Wrapper method for UF_SO_create_offset_curve_cvtr

Refer to UF_SO_create_offset_curve_cvtr for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetCylindrical	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	radius,
		NXOpen.Tag	angle,
		NXOpen.Tag	zdelta,
		out NXOpen.Tag	offset
	)

inline

Wrapper method for UF_SO_create_offset_cylindrical

Refer to UF_SO_create_offset_cylindrical for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetDirDist	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	direction,
		NXOpen.Tag	distance,
		out NXOpen.Tag	offset
	)

inline

Wrapper method for UF_SO_create_offset_dir_dist

Refer to UF_SO_create_offset_dir_dist for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetDouble	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double[]	offset1,
		out NXOpen.Tag	offset2
	)

inline

Wrapper method for UF_SO_create_offset_double

Refer to UF_SO_create_offset_double for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetDoublePnt	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double[]	point,
		double[]	offset1,
		out NXOpen.Tag	offset2
	)

inline

Wrapper method for UF_SO_create_offset_double_pnt

Refer to UF_SO_create_offset_double_pnt for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	offset1,
		NXOpen.Tag	xform,
		out NXOpen.Tag	offset2
	)

inline

Wrapper method for UF_SO_create_offset_extract

Refer to UF_SO_create_offset_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetSpherical	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	radius,
		NXOpen.Tag	angle1,
		NXOpen.Tag	angle2,
		out NXOpen.Tag	offset
	)

inline

Wrapper method for UF_SO_create_offset_spherical

Refer to UF_SO_create_offset_spherical for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateOffsetSurfCvtr	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		ref OffsetSurfCvtrData	offset_surf_cvtr_data,
		out NXOpen.Tag	curvature
	)

inline

Wrapper method for UF_SO_create_offset_surf_cvtr

Refer to UF_SO_create_offset_surf_cvtr for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePoint3Scalars	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	xyz,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_3_scalars

Refer to UF_SO_create_point_3_scalars for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePoint3ScalarsCsys	(	NXOpen.Tag	object_in_part,
		NXOpen.Tag	csys_tag,
		NXOpen.Tag[]	xyz,
		UpdateOption	update_option,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_3_scalars_csys

Refer to UF_SO_create_point_3_scalars_csys for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointAlongCurve	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	curve,
		NXOpen.Tag	point1,
		NXOpen.Tag	t,
		PointAlongCurveOption	option,
		bool	flip,
		out NXOpen.Tag	point2
	)

inline

Wrapper method for UF_SO_create_point_along_curve

Refer to UF_SO_create_point_along_curve for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointConicCenter	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	conic,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_conic_center

Refer to UF_SO_create_point_conic_center for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point1,
		NXOpen.Tag	xform,
		out NXOpen.Tag	point2
	)

inline

Wrapper method for UF_SO_create_point_extract

Refer to UF_SO_create_point_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointExtractWithDispMarker	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point1,
		NXOpen.Tag	xform,
		UFDisp.PolyMarker	disp_marker,
		out NXOpen.Tag	point2
	)

inline

Wrapper method for UF_SO_create_point_extract_with_disp_marker

Refer to UF_SO_create_point_extract_with_disp_marker for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointOffset	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	base_point,
		NXOpen.Tag	offset,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_offset

Refer to UF_SO_create_point_offset for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointOnArcAngle	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	arc,
		NXOpen.Tag	angle,
		NXOpen.Tag	xform,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_on_arc_angle

Refer to UF_SO_create_point_on_arc_angle for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointOnAxis	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	ref_point,
		NXOpen.Tag	axis,
		out NXOpen.Tag	point_on_axis
	)

inline

Wrapper method for UF_SO_create_point_on_axis

Refer to UF_SO_create_point_on_axis for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointOnCurve	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	curve,
		NXOpen.Tag	t,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_on_curve

Refer to UF_SO_create_point_on_curve for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointOnSurface	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	face,
		NXOpen.Tag	u,
		NXOpen.Tag	v,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_on_surface

Refer to UF_SO_create_point_on_surface for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointSurfaceCrv	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	face,
		NXOpen.Tag	curve,
		NXOpen.Tag	help_point1,
		NXOpen.Tag	help_point2,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_surface_crv

Refer to UF_SO_create_point_surface_crv for documentation

License requirements:None

void NXOpen.UF.UFSo.CreatePointTwoCurves	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	curve1,
		NXOpen.Tag	curve2,
		NXOpen.Tag	help_point1,
		NXOpen.Tag	help_point2,
		out NXOpen.Tag	point
	)

inline

Wrapper method for UF_SO_create_point_two_curves

Refer to UF_SO_create_point_two_curves for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarDist2Pnts	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag[]	points,
		out NXOpen.Tag	scalar
	)

inline

Wrapper method for UF_SO_create_scalar_dist_2_pnts

Refer to UF_SO_create_scalar_dist_2_pnts for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarDouble	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double	dbl,
		out NXOpen.Tag	scalar
	)

inline

Wrapper method for UF_SO_create_scalar_double

Refer to UF_SO_create_scalar_double for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarDoubleDim	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double	dbl,
		ScalarDimOption	dim,
		out NXOpen.Tag	scalar
	)

inline

Wrapper method for UF_SO_create_scalar_double_dim

Refer to UF_SO_create_scalar_double_dim for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarExp	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	exp,
		out NXOpen.Tag	scalar
	)

inline

Wrapper method for UF_SO_create_scalar_exp

Refer to UF_SO_create_scalar_exp for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarExpDim	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	exp,
		ScalarDimOption	dim,
		out NXOpen.Tag	scalar
	)

inline

Wrapper method for UF_SO_create_scalar_exp_dim

Refer to UF_SO_create_scalar_exp_dim for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	scalar1,
		NXOpen.Tag	scale,
		out NXOpen.Tag	scalar2
	)

inline

Wrapper method for UF_SO_create_scalar_extract

Refer to UF_SO_create_scalar_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarExtractDim	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	scalar1,
		NXOpen.Tag	scale,
		ScalarDimOption	dim,
		out NXOpen.Tag	scalar2
	)

inline

Wrapper method for UF_SO_create_scalar_extract_dim

Refer to UF_SO_create_scalar_extract_dim for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateScalarLengthCrv	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	curve,
		out NXOpen.Tag	scalar
	)

inline

Wrapper method for UF_SO_create_scalar_length_crv

Refer to UF_SO_create_scalar_length_crv for documentation

License requirements:None

unsafe void NXOpen.UF.UFSo.CreateSpline	(	UpdateOption	update_option,
		ref SplineData	spline_data,
		out NXOpen.Tag	spline
	)

inline

Wrapper method for UF_SO_create_spline

Refer to UF_SO_create_spline for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformAssyCtxt	(	NXOpen.Tag	object_in_part,
		NXOpen.Tag	from_part_occ,
		NXOpen.Tag	to_part_occ,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_assy_ctxt

Refer to UF_SO_create_xform_assy_ctxt for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformDoubles	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		double[]	point,
		double[]	x_direction,
		double[]	y_direction,
		double	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_doubles

Refer to UF_SO_create_xform_doubles for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformExtract	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	xform1,
		NXOpen.Tag	xform2,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_extract

Refer to UF_SO_create_xform_extract for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformOffsetXform	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	csys,
		NXOpen.Tag	point0,
		NXOpen.Tag	point1,
		NXOpen.Tag[]	rot_scalar_tags,
		NXOpen.Tag	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_offset_xform

Refer to UF_SO_create_xform_offset_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformPntXyDirs	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point,
		NXOpen.Tag	x_direction,
		NXOpen.Tag	y_direction,
		NXOpen.Tag	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_pnt_xy_dirs

Refer to UF_SO_create_xform_pnt_xy_dirs for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformPntXzDirs	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point,
		NXOpen.Tag	x_direction,
		NXOpen.Tag	z_direction,
		NXOpen.Tag	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_pnt_xz_dirs

Refer to UF_SO_create_xform_pnt_xz_dirs for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformPntYzDirs	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point,
		NXOpen.Tag	y_direction,
		NXOpen.Tag	z_direction,
		NXOpen.Tag	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_pnt_yz_dirs

Refer to UF_SO_create_xform_pnt_yz_dirs for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformThreePlanes	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	plane0,
		NXOpen.Tag	plane1,
		NXOpen.Tag	plane2,
		NXOpen.Tag	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_three_planes

Refer to UF_SO_create_xform_three_planes for documentation

License requirements:None

void NXOpen.UF.UFSo.CreateXformThreePoints	(	NXOpen.Tag	object_in_part,
		UpdateOption	update_option,
		NXOpen.Tag	point0,
		NXOpen.Tag	point1,
		NXOpen.Tag	point2,
		NXOpen.Tag	scale,
		out NXOpen.Tag	xform
	)

inline

Wrapper method for UF_SO_create_xform_three_points

Refer to UF_SO_create_xform_three_points for documentation

License requirements:None

void NXOpen.UF.UFSo.DeleteNonDeletables ( NXOpen.Tag part )

inline

Wrapper method for UF_SO_delete_non_deletables

Refer to UF_SO_delete_non_deletables for documentation

License requirements:None

void NXOpen.UF.UFSo.DeleteParms ( NXOpen.Tag so )

inline

Wrapper method for UF_SO_delete_parms

Refer to UF_SO_delete_parms for documentation

License requirements:None

void NXOpen.UF.UFSo.Display	(	NXOpen.Tag	so,
		int	view_option,
		int	color_option,
		int	color
	)

inline

Wrapper method for UF_SO_display

Refer to UF_SO_display for documentation

License requirements:None

void NXOpen.UF.UFSo.DisplayParents	(	NXOpen.Tag	so,
		int	view_option,
		int	color_option,
		int	color
	)

inline

Wrapper method for UF_SO_display_parents

Refer to UF_SO_display_parents for documentation

License requirements:None

void NXOpen.UF.UFSo.HasBecomeDumb	(	NXOpen.Tag	so,
		out bool	has_become_dumb
	)

inline

Wrapper method for UF_SO_has_become_dumb

Refer to UF_SO_has_become_dumb for documentation

License requirements:None

void NXOpen.UF.UFSo.IsAssyCtxtXform	(	NXOpen.Tag	xform,
		out bool	is_assy_xform
	)

inline

Wrapper method for UF_SO_is_assy_ctxt_xform

Refer to UF_SO_is_assy_ctxt_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.IsOutOfDate	(	NXOpen.Tag	so,
		out bool	is_out_of_date
	)

inline

Wrapper method for UF_SO_is_out_of_date

Refer to UF_SO_is_out_of_date for documentation

License requirements:None

void NXOpen.UF.UFSo.IsSo	(	NXOpen.Tag	candidate,
		out bool	is_so
	)

inline

Wrapper method for UF_SO_is_so

Refer to UF_SO_is_so for documentation

License requirements:None

void NXOpen.UF.UFSo.IsSubclass	(	NXOpen.Tag	candidate,
		out bool	is_so
	)

inline

Wrapper method for UF_SO_is_subclass

Refer to UF_SO_is_subclass for documentation

License requirements:None

void NXOpen.UF.UFSo.ReplaceParms	(	NXOpen.Tag	old_so,
		NXOpen.Tag	new_so
	)

inline

Wrapper method for UF_SO_replace_parms

Refer to UF_SO_replace_parms for documentation

License requirements:None

void NXOpen.UF.UFSo.SetDirectionOfAxis	(	NXOpen.Tag	axis,
		double[]	new_direction
	)

inline

Wrapper method for UF_SO_set_direction_of_axis

Refer to UF_SO_set_direction_of_axis for documentation

License requirements:None

void NXOpen.UF.UFSo.SetDirectionOfDirr	(	NXOpen.Tag	direction,
		double[]	dir
	)

inline

Wrapper method for UF_SO_set_direction_of_dirr

Refer to UF_SO_set_direction_of_dirr for documentation

License requirements:None

void NXOpen.UF.UFSo.SetDisplayMarkerOfPoint	(	NXOpen.Tag	point,
		UFDisp.PolyMarker	disp_marker
	)

inline

Wrapper method for UF_SO_set_display_marker_of_point

Refer to UF_SO_set_display_marker_of_point for documentation

License requirements:None

void NXOpen.UF.UFSo.SetDoubleOfScalar	(	NXOpen.Tag	scalar,
		double	dbl
	)

inline

Wrapper method for UF_SO_set_double_of_scalar

Refer to UF_SO_set_double_of_scalar for documentation

License requirements:None

void NXOpen.UF.UFSo.SetOffsetOfOffset	(	NXOpen.Tag	offset,
		double[]	new_offset
	)

inline

Wrapper method for UF_SO_set_offset_of_offset

Refer to UF_SO_set_offset_of_offset for documentation

License requirements:None

void NXOpen.UF.UFSo.SetPointOfAxis	(	NXOpen.Tag	axis,
		double[]	new_point
	)

inline

Wrapper method for UF_SO_set_point_of_axis

Refer to UF_SO_set_point_of_axis for documentation

License requirements:None

void NXOpen.UF.UFSo.SetPointOfXform	(	NXOpen.Tag	xform,
		double[]	point
	)

inline

Wrapper method for UF_SO_set_point_of_xform

Refer to UF_SO_set_point_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.SetScaleOfXform	(	NXOpen.Tag	xform,
		double	scale
	)

inline

Wrapper method for UF_SO_set_scale_of_xform

Refer to UF_SO_set_scale_of_xform for documentation

License requirements:None

void NXOpen.UF.UFSo.SetVisibilityOption	(	NXOpen.Tag	so,
		VisibilityOption	visibility_option
	)

inline

Wrapper method for UF_SO_set_visibility_option

Refer to UF_SO_set_visibility_option for documentation

License requirements:None

void NXOpen.UF.UFSo.SetXyDirectionOfXform	(	NXOpen.Tag	xform,
		double[]	x_direction,
		double[]	y_direction
	)

inline

Wrapper method for UF_SO_set_xy_direction_of_xform

Refer to UF_SO_set_xy_direction_of_xform for documentation

License requirements:None

The documentation for this class was generated from the following file:

UF_SO.cs

Classes

Public Types

Public Member Functions

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation