Represents a LineDesigner.ColumnFeature Features. More...

Inheritance diagram for NXOpen.LineDesigner.ColumnFeatureBuilder:

Public Types
enum	ColumnBaseType { None, Rectangle, Circle, Cone, UserDefined }
	This enum is providing possible column base types More...

enum	ColumnType { IBeam, TBeam, Rectangle, Circle, UserDefine }
	This enum is providing possible column types More...

Properties
unsafe NXOpen.Expression	BaseDepth `[get]`
	Returns the base depth of column feature More...

unsafe NXOpen.Expression	BaseDiameter `[get]`
	Returns the base diameter of column feature More...

unsafe NXOpen.Expression	BaseHeight `[get]`
	Returns the base height of column feature More...

unsafe NXOpen.Expression	BaseLowerDiameter `[get]`
	Returns the base lower diameter of column feature More...

unsafe NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnBaseType	BaseStyleEnum `[get, set]`
	Returns or sets the base cross section type of column feature More...

unsafe NXOpen.Expression	BaseUpperDiameter `[get]`
	Returns the base upper diameter of column feature More...

unsafe NXOpen.Section	BaseUserDefineSuperSection `[get]`
	Returns the user define cross section for base of column feature More...

unsafe NXOpen.Expression	BaseWidth `[get]`
	Returns the base width of column feature More...

unsafe NXOpen.Expression	ColumnDepth `[get]`
	Returns the column depth of column feature More...

unsafe NXOpen.Expression	ColumnDiameter `[get]`
	Returns the column diameter of column feature More...

unsafe NXOpen.Expression	ColumnHeight `[get]`
	Returns the column height of column feature More...

unsafe NXOpen.Point	ColumnOriginPoint `[get, set]`
	Returns or sets the column origin point is returns where colums is created More...

unsafe NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnType	ColumnStyleEnum `[get, set]`
	Returns or sets the column style of column feature More...

unsafe NXOpen.Expression	ColumnThickness `[get]`
	Returns the column thickness of column feature More...

unsafe NXOpen.Section	ColumnUserDefineSuperSection `[get]`
	Returns the user defined cross section of column feature More...

unsafe NXOpen.Expression	ColumnWidth `[get]`
	Returns the column width of column feature More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

unsafe bool	PatchSolutionFlag `[get, set]`
	Returns or sets the patch solution flag More...

unsafe string	PatchSurfaceFilename `[get, set]`
	Returns or sets the patch surface filename More...

unsafe string	SurroundingPatchSurfaceFilename `[get, set]`
	Returns or sets the surrounding patch surface filename More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a LineDesigner.ColumnFeature Features.

FeatureBuilder

To create a new instance of this class, use NXOpen.LineDesigner.LineDesignerManager.CreateColumnFeatureBuilder

Default values.

Property

Value

BaseDepth.Value

800 (millimeters part), 32 (inches part)

BaseDiameter.Value

800 (millimeters part), 32 (inches part)

BaseHeight.Value

900 (millimeters part), 35 (inches part)

BaseLowerDiameter.Value

900 (millimeters part), 35 (inches part)

BaseStyleEnum

None

BaseUpperDiameter.Value

800 (millimeters part), 32 (inches part)

BaseWidth.Value

800 (millimeters part), 32 (inches part)

ColumnDepth.Value

600 (millimeters part), 25 (inches part)

ColumnDiameter.Value

300 (millimeters part), 12 (inches part)

ColumnHeight.Value

3000 (millimeters part), 120 (inches part)

ColumnStyleEnum

IBeam

ColumnThickness.Value

30 (millimeters part), 2 (inches part)

ColumnWidth.Value

600 (millimeters part), 25 (inches part)

Created in NX9.0.0

Member Enumeration Documentation

enum NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnBaseType

This enum is providing possible column base types

Enumerator
None
Rectangle
Circle
Cone
UserDefined

enum NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnType

This enum is providing possible column types

Enumerator
IBeam
TBeam
Rectangle
Circle
UserDefine

Property Documentation

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.BaseDepth

get

Returns the base depth of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.BaseDiameter

get

Returns the base diameter of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.BaseHeight

get

Returns the base height of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.BaseLowerDiameter

get

Returns the base lower diameter of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnBaseType NXOpen.LineDesigner.ColumnFeatureBuilder.BaseStyleEnum

getset

Returns or sets the base cross section type of column feature

Created in NX9.0.0

License requirements to get this property: ld_line_designer ("FULL LINE DESIGNER")

License requirements to set this property: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.BaseUpperDiameter

get

Returns the base upper diameter of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Section NXOpen.LineDesigner.ColumnFeatureBuilder.BaseUserDefineSuperSection

get

Returns the user define cross section for base of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.BaseWidth

get

Returns the base width of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnDepth

get

Returns the column depth of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnDiameter

get

Returns the column diameter of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnHeight

get

Returns the column height of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Point NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnOriginPoint

getset

Returns or sets the column origin point is returns where colums is created

Created in NX9.0.0

License requirements to get this property: ld_line_designer ("FULL LINE DESIGNER")

License requirements to set this property: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnType NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnStyleEnum

getset

Returns or sets the column style of column feature

Created in NX9.0.0

License requirements to get this property: ld_line_designer ("FULL LINE DESIGNER")

License requirements to set this property: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnThickness

get

Returns the column thickness of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Section NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnUserDefineSuperSection

get

Returns the user defined cross section of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

unsafe NXOpen.Expression NXOpen.LineDesigner.ColumnFeatureBuilder.ColumnWidth

get

Returns the column width of column feature

Created in NX9.0.0

License requirements: ld_line_designer ("FULL LINE DESIGNER")

The documentation for this class was generated from the following file:

LineDesigner_ColumnFeatureBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation