NXOpen .NET Reference Guide
|
Represents a Edge Rip feature builder. More...
Public Types | |
enum | EndCapShapeOptions { Square, Round } |
This enum defines the end cap shapes. More... | |
Public Member Functions | |
unsafe NXOpen.Edge[] | GetRipEdges () |
Edges to rip More... | |
unsafe void | SetRipEdges (NXOpen.Edge[] ripEdges) |
Edges to rip More... | |
unsafe int | ValidateBuilderData () |
Verify whether the builder data is valid for creating a Edge Rip or not. More... | |
Public Member Functions inherited from NXOpen.Features.SheetMetal.SheetmetalBaseBuilder | |
unsafe NXOpen.Features.SheetMetal.ApplicationContext | GetApplicationContext () |
Get the application context. More... | |
unsafe void | SetApplicationContext (NXOpen.Features.SheetMetal.ApplicationContext appContext) |
Set the application context. More... | |
Public Member Functions inherited from NXOpen.Features.FeatureBuilder | |
unsafe NXOpen.Features.Feature | CommitFeature () |
Commits the feature parameters and creates the feature More... | |
unsafe NXOpen.Features.Feature | GetFeature () |
Returns the feature currently being edited by this builder. More... | |
unsafe void | HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature) |
Re-suppress an internal parent feature (a slave feature) after it has been edited. More... | |
unsafe void | SetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the parent features which would be internal or slaves to the feature being created or commited More... | |
unsafe void | ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature) |
Unsuppress an internal parent feature (a slave feature) so it can be edited. More... | |
unsafe void | UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature) |
Set the internal parent feature of the feature being edited to external More... | |
Public Member Functions inherited from NXOpen.Builder | |
unsafe NXOpen.NXObject | Commit () |
Commits any edits that have been applied to the builder. More... | |
unsafe void | Destroy () |
Deletes the builder, and cleans up any objects created by the builder. More... | |
unsafe NXOpen.NXObject[] | GetCommittedObjects () |
For builders that create more than one object, this method returns the objects that are created by commit. More... | |
unsafe NXOpen.NXObject | GetObject () |
Returns the object currently being edited by this builder. More... | |
unsafe void | ShowResults () |
Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
unsafe bool | Validate () |
Validate whether the inputs to the component are sufficient for commit to be called. More... | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
Asynchronously processes the given message. More... | |
IMessage | SyncProcessMessage (IMessage msg) |
Synchronously processes the given message. More... | |
Properties | |
unsafe NXOpen.Expression | BlendRadius [get] |
Returns the blend radius. More... | |
unsafe bool | BlendSharpCorners [get, set] |
Returns or sets whether sharp corners should be blended. More... | |
unsafe NXOpen.Features.SheetMetal.EdgeRipBuilder.EndCapShapeOptions | EndCapShape [get, set] |
Returns or sets the end cap shape type. More... | |
unsafe NXOpen.Section | Section [get, set] |
Returns or sets the section used by Edge Rip More... | |
unsafe NXOpen.Features.SketchFeature | Sketch [get, set] |
Returns or sets the Slave Sketch used by the Edge Rip, If one exists. More... | |
unsafe bool | UseSystemWidth [get, set] |
Returns or sets whether the system width should be used. More... | |
unsafe NXOpen.Expression | Width [get] |
Returns the rip width. More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Represents a Edge Rip feature builder.
To create a new instance of this class, use NXOpen.Features.SheetMetal.SheetmetalManager.CreateEdgeRipFeatureBuilder
Created in NX4.0.0
|
inline |
Edges to rip
Created in NX5.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
inline |
Edges to rip
Created in NX5.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
ripEdges | Rip Edges |
|
inline |
Verify whether the builder data is valid for creating a Edge Rip or not.
If the Builder data is valid, returned value shall be 0
Created in NX4.0.0
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
get |
Returns the blend radius.
This only applies if NXOpen.Features.SheetMetal.EdgeRipBuilder.BlendSharpCorners is set to true.
Created in NX12.0.2
License requirements: None.
|
getset |
Returns or sets whether sharp corners should be blended.
If true, blends will be applied at sharp corners with radius specified by NXOpen.Features.SheetMetal.EdgeRipBuilder.BlendRadius .
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
getset |
Returns or sets the end cap shape type.
This only applies if NXOpen.Features.SheetMetal.EdgeRipBuilder.UseSystemWidth is set to false.
Specify NXOpen.Features.SheetMetal.EdgeRipBuilder.EndCapShapeOptions.Square for square end caps. Specify NXOpen.Features.SheetMetal.EdgeRipBuilder.EndCapShapeOptions.Round for rounded end caps.
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
getset |
Returns or sets the section used by Edge Rip
Created in NX4.0.0
License requirements to get this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
getset |
Returns or sets the Slave Sketch used by the Edge Rip, If one exists.
Created in NX4.0.0
License requirements to get this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
getset |
Returns or sets whether the system width should be used.
If true, edge rip will be created with the system default rip width.
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
|
get |
Returns the rip width.
This only applies if NXOpen.Features.SheetMetal.EdgeRipBuilder.UseSystemWidth is set to false.
Created in NX12.0.2
License requirements: None.