Represents a Die Throat Child sub feature. More...

Inheritance diagram for NXOpen.Die.ThroatChildBuilder:

Public Types
enum	TypeOption { Wipe, Restrike }
	Settings for the type of the throat section. More...

Public Member Functions
unsafe void	GetCavityAttributes (out string title, out string value, out int color)
	Gets the cavity attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	GetExtensionAttributes (out string title, out string value, out int color)
	Gets the extension attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetCavityAttributes (string title, string value, int color)
	Sets the cavity attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetCavityDepth (string cavityDepth)
	More...

unsafe void	SetCavityOffset (string cavityOffset)
	More...

unsafe void	SetExtensionAttributes (string title, string value, int color)
	Sets the extension attributes, note existance of attributes depends on usage in main feature. More...

unsafe void	SetExtensionLength (string extensionLength)
	More...

unsafe void	SetLowerRadius (string lowerRadius)
	More...

unsafe void	SetSectionPlacement (string sectionPlacement)
	More...

unsafe void	SetStepDistance (string stepDistance)
	More...

unsafe void	SetUpperRadius (string upperRadius)
	More...

Public Member Functions inherited from NXOpen.Features.FeatureBuilder
unsafe NXOpen.Features.Feature	CommitFeature ()
	Commits the feature parameters and creates the feature More...

unsafe NXOpen.Features.Feature	GetFeature ()
	Returns the feature currently being edited by this builder. More...

unsafe void	HideInternalParentFeatureAfterEdit (NXOpen.Features.Feature parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

unsafe void	SetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited More...

unsafe void	ShowInternalParentFeatureForEdit (NXOpen.Features.Feature parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

unsafe void	UnsetParentFeatureInternal (NXOpen.Features.Feature parentFeature)
	Set the internal parent feature of the feature being edited to external More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Die.DieBuildStatusOption	BuildStatus `[get]`
	Returns the build status of the throat section. More...

unsafe NXOpen.Expression	CavityDepth `[get]`
	Returns the distance measured from the bend profile of the flange to the base of the throat. More...

unsafe NXOpen.Expression	CavityOffset `[get]`
	Returns the offset distance measured from the Throat CSYS to the back cavity area of the throat. More...

unsafe bool	DesignStatus `[get, set]`
	Returns or sets the design status of the throat section, if true the throat section will be built into the model, if false it will not. More...

unsafe bool	DisplayStatus `[get, set]`
	Returns or sets the display status of the throat section, if true input data to the throat section will be displayed, if false the input data will not be displayed. More...

unsafe NXOpen.Expression	ExtensionLength `[get]`
	Returns the tangent distance to add to the end of the flange. More...

unsafe NXOpen.Expression	LowerRadius `[get]`
	Returns the radius to apply to the lower corner of the throat cavity. More...

unsafe double	Radius `[get, set]`
	Returns or sets the radius to be applied at the back of the throat, top and bottom More...

unsafe NXOpen.Expression	SectionPlacement `[get]`
	Returns the throat section placement along the center line, an expression containg the length along the centerline for placement More...

unsafe double	Step `[get, set]`
	Returns or sets the step to be applied at the end of the tangent extension of the flange More...

unsafe NXOpen.Expression	StepDistance `[get]`
	Returns the step distance to add at the end of the tangent extension. More...

unsafe NXOpen.Expression	UpperRadius `[get]`
	Returns the radius to apply to the upper corner of the throat cavity. More...

Properties inherited from NXOpen.Features.FeatureBuilder
unsafe bool	ParentFeatureInternal `[get, set]`
	Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal More...

unsafe bool	PatchSolutionFlag `[get, set]`
	Returns or sets the patch solution flag More...

unsafe string	PatchSurfaceFilename `[get, set]`
	Returns or sets the patch surface filename More...

unsafe string	SurroundingPatchSurfaceFilename `[get, set]`
	Returns or sets the surrounding patch surface filename More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Die Throat Child sub feature.

This sub feature is created via the main feature builder.

Created in NX4.0.0

Member Enumeration Documentation

enum NXOpen.Die.ThroatChildBuilder.TypeOption

Settings for the type of the throat section.

Enumerator
Wipe	Throat section is built for a wipe operation.
Restrike	Throat section is built for a restrike operation.

Member Function Documentation

unsafe void NXOpen.Die.ThroatChildBuilder.GetCavityAttributes	(	out string	title,
		out string	value,
		out int	color
	)

inline

Gets the cavity attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of cavity faces.

unsafe void NXOpen.Die.ThroatChildBuilder.GetExtensionAttributes	(	out string	title,
		out string	value,
		out int	color
	)

inline

Gets the extension attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of extension faces.

unsafe void NXOpen.Die.ThroatChildBuilder.SetCavityAttributes	(	string	title,
		string	value,
		int	color
	)

inline

Sets the cavity attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of cavity faces.

unsafe void NXOpen.Die.ThroatChildBuilder.SetCavityDepth ( string cavityDepth )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

cavityDepth

unsafe void NXOpen.Die.ThroatChildBuilder.SetCavityOffset ( string cavityOffset )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

cavityOffset

unsafe void NXOpen.Die.ThroatChildBuilder.SetExtensionAttributes	(	string	title,
		string	value,
		int	color
	)

inline

Sets the extension attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of extension faces.

unsafe void NXOpen.Die.ThroatChildBuilder.SetExtensionLength ( string extensionLength )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

extensionLength

unsafe void NXOpen.Die.ThroatChildBuilder.SetLowerRadius ( string lowerRadius )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

lowerRadius

unsafe void NXOpen.Die.ThroatChildBuilder.SetSectionPlacement ( string sectionPlacement )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

sectionPlacement

unsafe void NXOpen.Die.ThroatChildBuilder.SetStepDistance ( string stepDistance )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

stepDistance

unsafe void NXOpen.Die.ThroatChildBuilder.SetUpperRadius ( string upperRadius )

inline

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

Parameters

upperRadius

Property Documentation

unsafe NXOpen.Die.DieBuildStatusOption NXOpen.Die.ThroatChildBuilder.BuildStatus

get

Returns the build status of the throat section.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.CavityDepth

get

Returns the distance measured from the bend profile of the flange to the base of the throat.

The base of the throat is considered to be the surface the wear plates are mounted on for guiding and aliging the flange steels. The value given must be larger than the minimum cavity depth. An expression containg the value. Value is used in both the Wipe and Restrike Flange.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.CavityOffset

get

Returns the offset distance measured from the Throat CSYS to the back cavity area of the throat.

Both positive and negative values may given to adjust the cavity to the proper location. An expression containg the value. Value is used in both the Wipe and Restrike Flange.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.ThroatChildBuilder.DesignStatus

getset

Returns or sets the design status of the throat section, if true the throat section will be built into the model, if false it will not.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe bool NXOpen.Die.ThroatChildBuilder.DisplayStatus

getset

Returns or sets the display status of the throat section, if true input data to the throat section will be displayed, if false the input data will not be displayed.

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.ExtensionLength

get

Returns the tangent distance to add to the end of the flange.

An expression containg the length along the tangent. Value is used in both the Wipe and Restrike Flange.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.LowerRadius

get

Returns the radius to apply to the lower corner of the throat cavity.

Typically, both the lower and the upper radius will be the same. An expression containg the value. Value is used in both the Wipe and Restrike Flange.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe double NXOpen.Die.ThroatChildBuilder.Radius

getset

Returns or sets the radius to be applied at the back of the throat, top and bottom

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.SectionPlacement

get

Returns the throat section placement along the center line, an expression containg the length along the centerline for placement

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe double NXOpen.Die.ThroatChildBuilder.Step

getset

Returns or sets the step to be applied at the end of the tangent extension of the flange

Created in NX4.0.0

License requirements to get this property: ug_die_design ("Die Design")

License requirements to set this property: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.StepDistance

get

Returns the step distance to add at the end of the tangent extension.

The step is at a right angle and only applies to the Wipe Flange. An expression containg the step distance.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

unsafe NXOpen.Expression NXOpen.Die.ThroatChildBuilder.UpperRadius

get

Returns the radius to apply to the upper corner of the throat cavity.

An expression containg the value. Value is used in both the Wipe and Restrike Flange.

Created in NX4.0.0

License requirements: ug_die_design ("Die Design")

The documentation for this class was generated from the following file:

Die_ThroatChildBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation