NXOpen .NET Reference Guide
|
Represents an avoidance start Builder More...
Public Types | |
enum | AdjustmentModeTypes { None, Range, Alignment } |
the adjustment mode options More... | |
enum | DwellUnitTypes { None, Seconds, Revolutions } |
the Dwell Unit type More... | |
enum | LimitTypes { DistanceOrTime, Percent } |
the local limit mode More... | |
enum | ModeTypes { None, Distance, Time, NumberOfPasses, NumberOfCuts, NumberOfLevels } |
The local return type options More... | |
enum | ReturnMoveModeTypes { None, Direct, RadialAxial, AxialRadial, ClearRadialDirect, ClearAxialDirect, ClearRadial, ClearAxial, RadialClearAxialDirect, RadialAxialRadial, RadialClearAxial, ClearRadialClearAxialDirect, ClearRadialAxialRadial, ClearRadialClearAxial, SameAsDeparture } |
the return move mode options More... | |
Public Member Functions | |
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes | GetLowerLimitType () |
Get the lower limits mode More... | |
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes | GetUpperLimitType () |
Get the upper limits mode More... | |
unsafe void | SetLowerLimitType (NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes lowerLimitModeValue) |
Set the lower limits mode More... | |
unsafe void | SetUpperLimitType (NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.LimitTypes upperLimitModeValue) |
Set the upper limits mode More... | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
Asynchronously processes the given message. More... | |
IMessage | SyncProcessMessage (IMessage msg) |
Synchronously processes the given message. More... | |
Properties | |
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes | AdjustmentMode [get, set] |
Returns or sets the adjustment mode mode More... | |
unsafe double | Distance [get, set] |
Returns or sets the local distance value More... | |
unsafe double | Dwell [get, set] |
Returns or sets the Dwell Time or Revolutions More... | |
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes | DwellUnit [get, set] |
Returns or sets the Dwell Unit type More... | |
unsafe NXOpen.CAM.PostEventsCiBuilder | EndOfPathBuilder [get] |
Returns the end event builder More... | |
unsafe double | LowerLimit [get, set] |
Returns or sets the lower limit More... | |
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ModeTypes | Mode [get, set] |
Returns or sets the local return type More... | |
unsafe int | NumberOfCuts [get, set] |
Returns or sets the local number of cuts More... | |
unsafe int | NumberOfLevels [get, set] |
Returns or sets the local number of levels More... | |
unsafe int | NumberOfPasses [get, set] |
Returns or sets the local number of passes value More... | |
unsafe string | OperatorMessage [get, set] |
Returns or sets the Operator Message String More... | |
unsafe bool | OutputOperatorMessage [get, set] |
Returns or sets the output operator message option More... | |
unsafe bool | OutputOpskip [get, set] |
Returns or sets the output opskip option More... | |
unsafe bool | OutputOpstop [get, set] |
Returns or sets the output opstop option More... | |
unsafe bool | OutputStop [get, set] |
Returns or sets the output stop option More... | |
unsafe NXOpen.Point | Point [get, set] |
Returns or sets the local return point More... | |
unsafe NXOpen.CAM.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes | ReturnMoveMode [get, set] |
Returns or sets the adjustment mode mode More... | |
unsafe NXOpen.CAM.PostEventsCiBuilder | StartOfPathBuilder [get] |
Returns the start event builder More... | |
unsafe double | Time [get, set] |
Returns or sets the local time value More... | |
unsafe double | UpperLimit [get, set] |
Returns or sets the upper limit More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Represents an avoidance start Builder
Created in NX6.0.0
the return move mode options
|
inline |
Get the lower limits mode
Created in NX6.0.0
License requirements: None.
|
inline |
Get the upper limits mode
Created in NX6.0.0
License requirements: None.
|
inline |
Set the lower limits mode
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
lowerLimitModeValue | the lower limits mode value |
|
inline |
Set the upper limits mode
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
upperLimitModeValue | the upper limits mode value |
|
getset |
Returns or sets the adjustment mode mode
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the local distance value
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the Dwell Time or Revolutions
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the Dwell Unit type
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the end event builder
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
|
getset |
Returns or sets the lower limit
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the local return type
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the local number of cuts
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the local number of levels
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the local number of passes value
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the Operator Message String
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the output operator message option
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the output opskip option
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the output opstop option
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the output stop option
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the local return point
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the adjustment mode mode
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the start event builder
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
|
getset |
Returns or sets the local time value
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the upper limit
Created in NX6.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")