NXOpen .NET Reference Guide
|
Represents a Tool Axis Advanced Builder More...
Public Types | |
enum | BladeSwarfCollisionHandlingType { ContactTopAndBottom, Degouge, Balance, BalanceToIntolOuttol } |
the blade swarf collision handling type More... | |
enum | BladeSwarfExtensionAlignmentType { Automatic, AlignToEdges, StartAngle } |
the blade swarf extension alignment type More... | |
enum | RotateAboutType { PartAxis, Blade } |
Rotate About type More... | |
enum | Type { Automatic, InterpolateVector, BladeSwarf, FollowBladeUv, Fixed } |
Available types for Tool Axis Advanced type More... | |
Properties | |
unsafe NXOpen.CAM.ToolAxisAdvanced.BladeSwarfCollisionHandlingType | BladeSwarfCollisionHandling [get, set] |
Returns or sets the blade swarf collision handling More... | |
unsafe NXOpen.CAM.ToolAxisAdvanced.BladeSwarfExtensionAlignmentType | BladeSwarfExtensionAlignment [get, set] |
Returns or sets the blade swarf extension alignment More... | |
unsafe NXOpen.CAM.InterpolateVector | InterpolateVector [get] |
Returns the Interpolate Vector builder More... | |
unsafe double | LeadingAngle [get, set] |
Returns or sets the leading angle More... | |
unsafe double | MinimumLeadAngle [get, set] |
Returns or sets the minimum lead angle More... | |
unsafe NXOpen.CAM.InheritableToolDepBuilder | PreviewMaximumDistanceBuilder [get] |
Returns the preview maximum distance More... | |
unsafe NXOpen.CAM.LeadAngles | PrimaryLeadAngles [get] |
Returns the primary lead angles, used for leading to trailing and swarf blade More... | |
unsafe NXOpen.CAM.ToolAxisAdvanced.RotateAboutType | RotateAbout [get, set] |
Returns or sets the rotate about More... | |
unsafe NXOpen.CAM.LeadAngles | SecondaryLeadAngles [get] |
Returns the secondary lead angles, used for trailing to leading More... | |
unsafe int | SmoothingMethod [get, set] |
Returns or sets the smoothing method More... | |
unsafe double | SplitterAngle [get, set] |
Returns or sets the splitter angle More... | |
unsafe bool | SwarfGougeCheck [get, set] |
Returns or sets the swarf gouge check More... | |
unsafe double | TiltAngle [get, set] |
Returns or sets the tilt angle More... | |
unsafe NXOpen.Direction | ToolAxisAdvancedVector [get, set] |
Returns or sets the tool vector More... | |
unsafe NXOpen.CAM.ToolAxisAdvanced.Type | ToolAxisType [get, set] |
Returns or sets the tool axis types More... | |
unsafe double | TrailingAngle [get, set] |
Returns or sets the trailing angle More... | |
unsafe double | TrailingEdgeClearanceAngle [get, set] |
Returns or sets the trailing edge clearance angle More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Represents a Tool Axis Advanced Builder
Created in NX7.0.0
|
getset |
Returns or sets the blade swarf collision handling
Created in NX1847.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the blade swarf extension alignment
Created in NX1847.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the Interpolate Vector builder
Created in NX7.5.0
License requirements: None.
|
getset |
Returns or sets the leading angle
Created in NX7.0.0
Deprecated in NX8.5.0. Use CAM.LeadAngles.AtLeadingEdge instead.
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the minimum lead angle
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the preview maximum distance
Created in NX11.0.1
License requirements: None.
|
get |
Returns the primary lead angles, used for leading to trailing and swarf blade
Created in NX8.5.0
License requirements: None.
|
getset |
Returns or sets the rotate about
Created in NX7.5.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the secondary lead angles, used for trailing to leading
Created in NX8.5.0
License requirements: None.
|
getset |
Returns or sets the smoothing method
Created in NX11.0.1
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the splitter angle
Created in NX7.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the swarf gouge check
Created in NX9.0.1
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the tilt angle
Created in NX7.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the tool vector
Created in NX12.0.2
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the tool axis types
Created in NX7.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the trailing angle
Created in NX7.0.0
Deprecated in NX8.5.0. Use CAM.LeadAngles.AtTrailingEdge instead.
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the trailing edge clearance angle
Created in NX9.0.3
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")