Represents a Stepover Builder More...

Inheritance diagram for NXOpen.CAM.StepoverBuilder:

Public Types
enum	ApplyTypes { OnPlane, OnPart }
	apply on part options More...

enum	StepoverTypes { None, Constant, Scallop, PercentToolFlat, Multiple, Number, Maximum, Angular, VariableAverage, VariableMaximum, UseCutDepth, PercentRemaining, PercentWire, StockPerPass, PercentThreadLength, Exact, PercentFluteLength, BlankContourConstant, Degression, PercentDegression, UserDefined }
	stepover options More...

Properties
unsafe int	AdditionalPasses `[get, set]`
	Returns or sets the number of additional passes More...

unsafe double	Angular `[get, set]`
	Returns or sets the angular More...

unsafe NXOpen.CAM.StepoverBuilder.ApplyTypes	ApplyOn `[get, set]`
	Returns or sets the apply on part option More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	BlankContourDepth `[get]`
	Returns the Stepover Depth Builder More...

unsafe int	BlankContourNoLevels `[get, set]`
	Returns or sets the number of levels More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	DistanceBuilder `[get]`
	Returns the distance (inheritable tool dependent) More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	DistanceMaximumBuilder `[get]`
	Returns the distance maximum(inheritable tool dependent) More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	DistanceMinimumBuilder `[get]`
	Returns the distance minimum(inheritable tool dependent) More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	FirstDistance `[get]`
	Returns the First Distance More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	HorizontalLimitBuilder `[get]`
	Returns the horizontal limit (inheritable tool dependent) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	InheritableDistance `[get]`
	Returns the distance (inheritable double) More...

unsafe double	MaximumAverage `[get, set]`
	Returns or sets the variable average maximum value More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MaximumAverageBuilder `[get]`
	Returns the variable average maximum builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MaximumAverageOnlyBuilder `[get]`
	Returns the variable average maximum only builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MaximumBuilder `[get]`
	Returns the maximum builder More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	MaximumPercentBuilder `[get]`
	Returns the maximum percent of remaining More...

unsafe double	MinimumAverage `[get, set]`
	Returns or sets the variable average minimum value More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MinimumAverageBuilder `[get]`
	Returns the variable average minimum builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MinimumDistance `[get]`
	Returns the Minimum Distance More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	MinimumPercentBuilder `[get]`
	Returns the minimum percent of remaining More...

unsafe NXOpen.CAM.MultipleStepoverBuilder	MultipleBuilder `[get]`
	Returns the multiple builder More...

unsafe int	NumberAtFirstDirection `[get, set]`
	Returns or sets the number of stepovers at first direction More...

unsafe int	NumberAtSecondDirection `[get, set]`
	Returns or sets the number of stepovers at second direction More...

unsafe int	NumberOfStepovers `[get, set]`
	Returns or sets the number of stepovers More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PercentFluteLength `[get]`
	Returns the percent flute of length More...

unsafe double	PercentOfDegression `[get, set]`
	Returns or sets the Percent of Degression More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PercentOfRemainingBuilder `[get]`
	Returns the percent of remaining More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PercentThreadLength `[get]`
	Returns the percent thread length More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PercentToolFlatBuilder `[get]`
	Returns the percent tool flat More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PercentWireBuilder `[get]`
	Returns the % wire (inheritable tool dependent) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	ScallopBuilder `[get]`
	Returns the scallop height More...

unsafe NXOpen.CAM.StepoverBuilder.StepoverTypes	StepoverType `[get, set]`
	Returns or sets the stepover type More...

unsafe NXOpen.CAM.StockPerPassBuilder	StockPerPassBuilder `[get]`
	Returns the stock per pass More...

unsafe NXOpen.CAM.MultipleStepoverBuilder	UserDefined `[get]`
	Returns the user defined builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	ValueOfDegression `[get]`
	Returns the Value of Degression More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	VariableMaximumBuilder `[get]`
	Returns the variable maximum builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	VariableMaximumOnlyBuilder `[get]`
	Returns the variable maximum only builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	VariableMinimumBuilder `[get]`
	Returns the variable minimum builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	VerticalLimitBuilder `[get]`
	Returns the vertical limit (inheritable tool dependent) More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a Stepover Builder

Created in NX6.0.0

Member Enumeration Documentation

enum NXOpen.CAM.StepoverBuilder.ApplyTypes

apply on part options

Enumerator
OnPlane	Apply on Plane
OnPart	Apply on Part

enum NXOpen.CAM.StepoverBuilder.StepoverTypes

stepover options

Enumerator
None	None
Constant	Constant
Scallop	Scallop
PercentToolFlat	% Tool Flat
Multiple	Multiple
Number	Number of stepovers
Maximum	Maximum Stepover
Angular	Angular
VariableAverage	Variable Average
VariableMaximum	Variable Maximum
UseCutDepth	Use Depth Of Cut
PercentRemaining	Percent Of Remaining
PercentWire	% Wire
StockPerPass	Stock Per Pass
PercentThreadLength	Percent Thread Length
Exact	Exact
PercentFluteLength	Percent Flute Length
BlankContourConstant	Depth and Number of levels
Degression	Degression
PercentDegression	% Degression
UserDefined	User Defined

Property Documentation

unsafe int NXOpen.CAM.StepoverBuilder.AdditionalPasses

getset

Returns or sets the number of additional passes

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.StepoverBuilder.Angular

getset

Returns or sets the angular

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.StepoverBuilder.ApplyTypes NXOpen.CAM.StepoverBuilder.ApplyOn

getset

Returns or sets the apply on part option

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.BlankContourDepth

get

Returns the Stepover Depth Builder

Created in NX8.5.0

License requirements: None.

unsafe int NXOpen.CAM.StepoverBuilder.BlankContourNoLevels

getset

Returns or sets the number of levels

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.DistanceBuilder

get

Returns the distance (inheritable tool dependent)

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.DistanceMaximumBuilder

get

Returns the distance maximum(inheritable tool dependent)

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.DistanceMinimumBuilder

get

Returns the distance minimum(inheritable tool dependent)

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.FirstDistance

get

Returns the First Distance

Created in NX9.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.HorizontalLimitBuilder

get

Returns the horizontal limit (inheritable tool dependent)

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.InheritableDistance

get

Returns the distance (inheritable double)

Created in NX7.5.0

License requirements: None.

unsafe double NXOpen.CAM.StepoverBuilder.MaximumAverage

getset

Returns or sets the variable average maximum value

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.MaximumAverageBuilder

get

Returns the variable average maximum builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.MaximumAverageOnlyBuilder

get

Returns the variable average maximum only builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.MaximumBuilder

get

Returns the maximum builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.MaximumPercentBuilder

get

Returns the maximum percent of remaining

Created in NX6.0.0

License requirements: None.

unsafe double NXOpen.CAM.StepoverBuilder.MinimumAverage

getset

Returns or sets the variable average minimum value

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.MinimumAverageBuilder

get

Returns the variable average minimum builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.MinimumDistance

get

Returns the Minimum Distance

Created in NX9.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.MinimumPercentBuilder

get

Returns the minimum percent of remaining

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.MultipleStepoverBuilder NXOpen.CAM.StepoverBuilder.MultipleBuilder

get

Returns the multiple builder

Created in NX6.0.0

License requirements: None.

unsafe int NXOpen.CAM.StepoverBuilder.NumberAtFirstDirection

getset

Returns or sets the number of stepovers at first direction

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.StepoverBuilder.NumberAtSecondDirection

getset

Returns or sets the number of stepovers at second direction

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.StepoverBuilder.NumberOfStepovers

getset

Returns or sets the number of stepovers

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.PercentFluteLength

get

Returns the percent flute of length

Created in NX8.0.0

License requirements: None.

unsafe double NXOpen.CAM.StepoverBuilder.PercentOfDegression

getset

Returns or sets the Percent of Degression

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.PercentOfRemainingBuilder

get

Returns the percent of remaining

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.PercentThreadLength

get

Returns the percent thread length

Created in NX7.5.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.PercentToolFlatBuilder

get

Returns the percent tool flat

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.PercentWireBuilder

get

Returns the % wire (inheritable tool dependent)

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.StepoverBuilder.ScallopBuilder

get

Returns the scallop height

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.StepoverBuilder.StepoverTypes NXOpen.CAM.StepoverBuilder.StepoverType

getset

Returns or sets the stepover type

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.StockPerPassBuilder NXOpen.CAM.StepoverBuilder.StockPerPassBuilder

get

Returns the stock per pass

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.MultipleStepoverBuilder NXOpen.CAM.StepoverBuilder.UserDefined

get

Returns the user defined builder

Created in NX9.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.ValueOfDegression

get

Returns the Value of Degression

Created in NX9.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.VariableMaximumBuilder

get

Returns the variable maximum builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.VariableMaximumOnlyBuilder

get

Returns the variable maximum only builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.VariableMinimumBuilder

get

Returns the variable minimum builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.StepoverBuilder.VerticalLimitBuilder

get

Returns the vertical limit (inheritable tool dependent)

Created in NX6.0.0

License requirements: None.

The documentation for this class was generated from the following file:

CAM_StepoverBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation