NXOpen .NET Reference Guide
|
represent rotary floor finish builder More...
Public Types | |
enum | CutDirection { Corner1U = 1, Corner1V, Corner2U, Corner2V, Corner3U, Corner3V, Corner4U, Corner4V } |
the types for start cut direction More... | |
enum | CutDirType { Climb, Conventional, Mixed } |
the types for cut direction More... | |
enum | DirectionType { AroundAxis, AlongAxis } |
the types for direction More... | |
enum | DmSurfCutAreaType { SurfacePercent, DiagonalPoints } |
the types for cut area More... | |
enum | DmSurfCutStepTypes { Tolerance, Points } |
the types for Cut Step More... | |
enum | GougeActionTypes { None, Warning, Skip, Retract } |
the gouge action types for Rotary Floor Finish method/Gouge Check in scop More... | |
enum | MatSideType { Same, Opp } |
the types for flip material More... | |
Public Member Functions | |
unsafe void | FlipMaterial () |
Flip material side More... | |
unsafe NXOpen.CAM.DmRotaryFloorFinishBuilder.CutDirection | GetCutDirection () |
Get cut direction. More... | |
unsafe double | GetSurfacePercentageEndFirst () |
Get percentage end first More... | |
unsafe double | GetSurfacePercentageEndLast () |
Get percentage end last More... | |
unsafe double | GetSurfacePercentageEndStep () |
Get percentage end step More... | |
unsafe double | GetSurfacePercentageStartFirst () |
Get percentage start first More... | |
unsafe double | GetSurfacePercentageStartLast () |
Get percentage start last More... | |
unsafe double | GetSurfacePercentageStartStep () |
Get percentage start step More... | |
unsafe void | SetCutDirection (NXOpen.CAM.DmRotaryFloorFinishBuilder.CutDirection cutDirection) |
Set cut direction. More... | |
unsafe void | SetSurfacePercentageEndFirst (double dValue) |
Set percentage end first More... | |
unsafe void | SetSurfacePercentageEndLast (double dValue) |
Set percentage end last More... | |
unsafe void | SetSurfacePercentageEndStep (double dValue) |
Set percentage end step More... | |
unsafe void | SetSurfacePercentageStartFirst (double dValue) |
Set percentage start first More... | |
unsafe void | SetSurfacePercentageStartLast (double dValue) |
Set percentage start last More... | |
unsafe void | SetSurfacePercentageStartStep (double dValue) |
Set percentage start step More... | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
Asynchronously processes the given message. More... | |
IMessage | SyncProcessMessage (IMessage msg) |
Synchronously processes the given message. More... | |
Properties | |
unsafe NXOpen.CAM.DmRotaryFloorFinishBuilder.CutDirType | CutDirectionType [get, set] |
Returns or sets the function for cut direction type More... | |
unsafe NXOpen.CAM.CutPatternBuilder | CutPatternBuilder [get] |
Returns the cut pattern builder More... | |
unsafe NXOpen.CAM.DmRotaryFloorFinishBuilder.DirectionType | DirectionAxisType [get, set] |
Returns or sets the direction axis type More... | |
unsafe NXOpen.CAM.DmRotaryFloorFinishBuilder.DmSurfCutAreaType | DmSurfCutArea [get, set] |
Returns or sets the cut area More... | |
unsafe NXOpen.CAM.DmRotaryFloorFinishBuilder.DmSurfCutStepTypes | DmSurfCutStep [get, set] |
Returns or sets the cut step More... | |
unsafe int | DmSurfCutStepFirstCut [get, set] |
Returns or sets the first cut of cut step More... | |
unsafe int | DmSurfCutStepSecondCut [get, set] |
Returns or sets the second cut of cut step More... | |
unsafe int | DmSurfCutStepThirdCut [get, set] |
Returns or sets the third cut of cut step More... | |
unsafe NXOpen.CAM.DmRotaryFloorFinishBuilder.GougeActionTypes | DmSurfGouge [get, set] |
Returns or sets the gouge action More... | |
unsafe NXOpen.CAM.PartAxisBuilder | PartAxisBuilder [get] |
Returns the part axis builder More... | |
unsafe NXOpen.CAM.InheritableDoubleBuilder | StepIntolBuilder [get] |
Returns the builder of cut step intol More... | |
unsafe NXOpen.CAM.InheritableDoubleBuilder | StepOuttolBuilder [get] |
Returns the builder of cut step outol More... | |
unsafe double | TiltAngle [get, set] |
Returns or sets the tilt angle More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
represent rotary floor finish builder
Created in NX9.0.0
|
inline |
Flip material side
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
|
inline |
Get cut direction.
Created in NX9.0.0
License requirements: None.
|
inline |
Get percentage end first
Created in NX9.0.0
License requirements: None.
|
inline |
Get percentage end last
Created in NX9.0.0
License requirements: None.
|
inline |
Get percentage end step
Created in NX9.0.0
License requirements: None.
|
inline |
Get percentage start first
Created in NX9.0.0
License requirements: None.
|
inline |
Get percentage start last
Created in NX9.0.0
License requirements: None.
|
inline |
Get percentage start step
Created in NX9.0.0
License requirements: None.
|
inline |
Set cut direction.
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
cutDirection | the value of cut direction |
|
inline |
Set percentage end first
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
dValue | the value of end first |
|
inline |
Set percentage end last
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
dValue | the value of end last |
|
inline |
Set percentage end step
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
dValue | the value of end step |
|
inline |
Set percentage start first
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
dValue | the value of start first |
|
inline |
Set percentage start last
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
dValue | the value of start last |
|
inline |
Set percentage start step
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
dValue | the value of start step |
|
getset |
Returns or sets the function for cut direction type
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the cut pattern builder
Created in NX9.0.0
License requirements: None.
|
getset |
Returns or sets the direction axis type
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the cut area
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the cut step
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: None.
|
getset |
Returns or sets the first cut of cut step
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: None.
|
getset |
Returns or sets the second cut of cut step
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: None.
|
getset |
Returns or sets the third cut of cut step
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: None.
|
getset |
Returns or sets the gouge action
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: None.
|
get |
Returns the part axis builder
Created in NX9.0.0
License requirements: None.
|
get |
Returns the builder of cut step intol
Created in NX9.0.0
License requirements: None.
|
get |
Returns the builder of cut step outol
Created in NX9.0.0
License requirements: None.
|
getset |
Returns or sets the tilt angle
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")