NXOpen .NET Reference Guide
|
Represents a Blade Rough Drive Method Builder More...
Public Types | |
enum | MaterialSideType { Same, Opposite } |
Available types for Flip Material, SDM: Select Cut Direction More... | |
Properties | |
unsafe NXOpen.CAM.BladeFinishPass | BladeFinishPass [get] |
Returns the blade finish pass builder More... | |
unsafe NXOpen.CAM.BladeSideEntry | BladeSideEntry [get] |
Returns the blade side entry builder More... | |
unsafe NXOpen.CAM.BladeStepOver | BladeStepOver [get] |
Returns the blade stepover builder More... | |
unsafe NXOpen.CAM.CutDirection.Types | CutDirection [get, set] |
Returns or sets the Cut Direction More... | |
unsafe NXOpen.CAM.CutPatternBuilder | CutPattern [get] |
Returns the cut pattern builder More... | |
unsafe NXOpen.CAM.BladeEdge | LeadingEdge [get] |
Returns the leading edge builder More... | |
unsafe NXOpen.CAM.BladeEdge | TrailingEdge [get] |
Returns the trailing edge builder More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Represents a Blade Rough Drive Method Builder
This is an abstract superclass that has instantaible subclasses
Created in NX7.0.0
|
get |
Returns the blade finish pass builder
Created in NX12.0.2
License requirements: None.
|
get |
Returns the blade side entry builder
Created in NX12.0.2
License requirements: None.
|
get |
Returns the blade stepover builder
Created in NX12.0.2
License requirements: None.
|
getset |
Returns or sets the Cut Direction
Created in NX7.0.0
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the cut pattern builder
Created in NX7.0.0
License requirements: None.
|
get |
Returns the leading edge builder
Created in NX7.0.0
License requirements: None.
|
get |
Returns the trailing edge builder
Created in NX7.0.0
License requirements: None.