NXOpen .NET Reference Guide
|
This is the class handling the attributes of a load recipe. More...
Public Member Functions | |
unsafe void | Autofill () |
Fills the mapping tables of the Load Recipe based on available data in the data sources. More... | |
unsafe void | Autofill (NXOpen.CAE.FEModelOccurrence feModelOcc) |
Overload that also sets the Assembly Component to be used by Autofill. More... | |
unsafe void | AutofillSelectionRecipeBased () |
Fills the mapping tables of the Load Recipe based on Selection Recipes in the model and available data in the data sources. More... | |
unsafe void | DisableLoadCondition (string loadCondition) |
Disables a load condition in the Load Recipe. More... | |
unsafe void | DisableTrackingValue (string trackingValue) |
Disables a tracking value in the Load Recipe. More... | |
unsafe void | EnableLoadCondition (string loadCondition) |
Enables a load condition in the Load Recipe. More... | |
unsafe void | EnableTrackingValue (string trackingValue) |
Enables a tracking value in the Load Recipe. More... | |
unsafe bool | ExportToCSVFile (string filePath) |
Exports mapping entries to a CSV file. More... | |
unsafe NXOpen.CAE.SimLoadRecipeTypes.LoadConditionHandling | GetLoadConditionHandlingType () |
Gets the type of load conditions handling of the NXOpen.CAE.SimLoadRecipe More... | |
unsafe string[] | GetLoadConditions () |
Gets the load condition strings declared in the NXOpen.CAE.SimLoadRecipe More... | |
unsafe string[] | GetTrackingValues () |
Gets the tracking value strings declared in the NXOpen.CAE.SimLoadRecipe More... | |
unsafe void | ImportFromCSVFile (string filePath, string csvDelim, out bool noParsedContent, out bool invalidLoadType, out bool invalidEntityType, out bool invalidNbrOfParameters) |
Imports mapping entries from a CSV file. More... | |
unsafe void | LoadLoadConditions () |
Loads all the load conditions available in the data sources and enables them. More... | |
unsafe void | LoadTrackingValues () |
Loads all the tracking values available in the data sources and enables them. More... | |
unsafe NXOpen.CAE.SimLoadRecipeLbcGenerator | NewLbcGeneratorFromLoadRecipe () |
Creates a new NXOpen.CAE.SimLoadRecipeLbcGenerator . More... | |
unsafe void | SetAutofillAssemblyComponent (NXOpen.CAE.FEModelOccurrence feModelOcc) |
Set the assembly component on which the autofill method operates on. More... | |
unsafe void | SetLoadConditionHandlingType (NXOpen.CAE.SimLoadRecipeTypes.LoadConditionHandling lcHandling) |
Sets the type of load conditions handling of the NXOpen.CAE.SimLoadRecipe More... | |
unsafe void | Validation () |
Validation of the Load Recipe More... | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
Asynchronously processes the given message. More... | |
IMessage | SyncProcessMessage (IMessage msg) |
Synchronously processes the given message. More... | |
Properties | |
unsafe NXOpen.CAE.SimLoadRecipeTypes.DataTypes | DataType [get] |
Returns the data type of a NXOpen.CAE.SimLoadRecipe More... | |
unsafe string | Description [get, set] |
Returns or sets the description of a NXOpen.CAE.SimLoadRecipe . More... | |
NXOpen.CAE.SimLoadRecipeMappingCollection | MappingCollection [get] |
Returns the NXOpen.CAE.SimLoadRecipeMappingCollection . More... | |
unsafe NXOpen.CAE.SimLoadRecipeTypes.MappingTypes | MappingType [get, set] |
Returns or sets the mapping type of a NXOpen.CAE.SimLoadRecipe More... | |
unsafe string | Name [get, set] |
Returns or sets the name of a NXOpen.CAE.SimLoadRecipe . More... | |
NXOpen.CAE.SimLoadRecipeSourceCollection | SourceCollection [get] |
Contains a NXOpen.CAE.SimLoadRecipeSourceCollection . More... | |
Properties inherited from NXOpen.TaggedObject | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
This is the class handling the attributes of a load recipe.
To create a new instance of this class, use NXOpen.CAE.SimLoadRecipeCollection.Create
Created in NX10.0.0
|
inline |
Fills the mapping tables of the Load Recipe based on available data in the data sources.
The behavior depends on the Load Recipe settings and the nature of the available data in the data sources.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Overload that also sets the Assembly Component to be used by Autofill.
Created in NX11.0.0
Deprecated in NX12.0.0. Use NXOpen.CAE.SimLoadRecipe.SetAutofillAssemblyComponent and NXOpen.CAE.SimLoadRecipe.Autofill instead.
License requirements: nx_masterfem ("Finite Element Modeling")
feModelOcc |
|
inline |
Fills the mapping tables of the Load Recipe based on Selection Recipes in the model and available data in the data sources.
For each mapping table, individual mapping entries will be created for all Selection Recipes which map to available SORT2 data by function name. Available parameters will be mapped using AF (Auto-Function) mapping.
Created in NX1847.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Disables a load condition in the Load Recipe.
Disabled load conditions will not be used when creating a solution from load recipe.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
loadCondition |
|
inline |
Disables a tracking value in the Load Recipe.
Disabled tracking values will not be used when creating a solution from load recipe.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
trackingValue |
|
inline |
Enables a load condition in the Load Recipe.
Only enabled load conditions will be used when creating a solution from load recipe.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
loadCondition |
|
inline |
Enables a tracking value in the Load Recipe.
Only enabled tracking values will be used when creating a solution from load recipe.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
trackingValue |
|
inline |
Exports mapping entries to a CSV file.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
filePath | Path of the CSV file |
|
inline |
Gets the type of load conditions handling of the NXOpen.CAE.SimLoadRecipe
Created in NX10.0.0
License requirements: None.
|
inline |
Gets the load condition strings declared in the NXOpen.CAE.SimLoadRecipe
Created in NX11.0.0
License requirements: None.
|
inline |
Gets the tracking value strings declared in the NXOpen.CAE.SimLoadRecipe
Created in NX11.0.0
License requirements: None.
|
inline |
Imports mapping entries from a CSV file.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
filePath | Path of the CSV file |
csvDelim | Delimiter character used in the CSV file. If a null reference (Nothing in Visual Basic), the comma character will be used. If this string contains more then one character, only the first one will be used. |
noParsedContent | True if no valid data could be parsed from the file. |
invalidLoadType | True if an invalid load type was found. All data for this load type will be ignored. |
invalidEntityType | True if an invalid entity type was found. The entities with invalid entity type will be ignored. |
invalidNbrOfParameters | True if an invalid number of parameters was found for an entry. If the number of parameters is less then expected, it will populate the first values for which it has values. If the number of parameters is more then expected, the last values will be ignored. |
|
inline |
Loads all the load conditions available in the data sources and enables them.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Loads all the tracking values available in the data sources and enables them.
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Creates a new NXOpen.CAE.SimLoadRecipeLbcGenerator .
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Set the assembly component on which the autofill method operates on.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
feModelOcc |
|
inline |
Sets the type of load conditions handling of the NXOpen.CAE.SimLoadRecipe
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
lcHandling |
|
inline |
Validation of the Load Recipe
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
get |
|
getset |
Returns or sets the description of a NXOpen.CAE.SimLoadRecipe .
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the NXOpen.CAE.SimLoadRecipeMappingCollection .
Created in NX10.0.0
|
getset |
Returns or sets the mapping type of a NXOpen.CAE.SimLoadRecipe
Created in NX1847.0.0
License requirements to get this property: None.
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the name of a NXOpen.CAE.SimLoadRecipe .
Created in NX10.0.0
License requirements to get this property: None.
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
get |
Contains a NXOpen.CAE.SimLoadRecipeSourceCollection .
Created in NX10.0.0