|
NXOpen .NET Reference Guide
|
|
NXOpen .NET Reference Guide
|
Represents a NXOpen.CAE.AeroStructures.MarginSolution . More...
Public Member Functions | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultQuery | CreateMarginResultQuery (NXOpen.CAE.AeroStructures.MarginResultTableRowFilter filter) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing all the results of every calculation that has been solved and belongs to this solution If a non-null CAE.AeroStructures.MarginResultTableRowFilter is passed as argument the results are further post-filtered (after the rank calculation has taken place) according to that filter More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultQuery | CreateMarginResultQuery (NXOpen.CAE.AeroStructures.MarginCalculation[] marginCalculations, NXOpen.CAE.AeroStructures.MarginResultTableRowFilter filter) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing all the results of every calculation passed in the argument that has been solved and belongs to this solution If a non-null CAE.AeroStructures.MarginResultTableRowFilter is passed as argument the results are further post-filtered (after the rank calculation has taken place) according to that filter More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultQuery | CreateMarginResultQuery (int maxRank, double maxMS, NXOpen.CAE.AeroStructures.MarginResultTableRowFilter filter) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing all the results of every calculation belonging to this solution that has been solved and that satisfies the following pre-conditions: More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultQuery | CreateMarginResultQuery (NXOpen.CAE.AeroStructures.MarginCalculation[] marginCalculations, int maxRank, double maxMS, NXOpen.CAE.AeroStructures.MarginResultTableRowFilter filter) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing the results of the calculations passed in the argument belonging to this solution that have been solved and that satisfy the following pre-conditions: More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultTableDataProvider | CreateMarginResultTableDataProvider () |
| Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider which will be based on every calculation of this solution that has results More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultTableDataProvider | CreateMarginResultTableDataProvider (NXOpen.CAE.AeroStructures.MarginCalculation[] marginCalculations) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider Only the subset of calculations given in the argument which have results are taken into account More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultTableDataProvider | CreateMarginResultTableDataProvider (int maxRank, double maxMS) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider which will be based on every calculation of this solution that has results and satisfies the following conditions: More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultTableDataProvider | CreateMarginResultTableDataProvider (NXOpen.CAE.AeroStructures.MarginCalculation[] marginCalculations, int maxRank, double maxMS) |
| Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider Only the subset of calculations given in the argument which have results are taken into account Additionally only results that satisfy the following conditions are taken into account: More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultTableRowFilter | CreateMarginResultTableRowFilter () |
| Creates an empty NXOpen.CAE.AeroStructures.MarginResultTableRowFilter By default it is a conjunction, meaning that successive conditions added to this filter using AddCondition will be the terms of a conjunction (cond1 AND cond2 AND . More... | |
| unsafe NXOpen.CAE.AeroStructures.MarginResultTableRowFilter | CreateMarginResultTableRowFilter (bool isDisjunction, bool isNegated) |
| Creates an empty NXOpen.CAE.AeroStructures.MarginResultTableRowFilter Specifying if it is a conjunction or a disjunction and if it is negated or not. More... | |
| unsafe NXOpen.Report.Report | CreateReport (string templateFile, string reportName, bool listError) |
| Creates a Report.Report in this report collection. More... | |
| unsafe void | GetReports (out NXOpen.Report.Report[] pReports) |
| Gets all reports in the report collection. More... | |
| unsafe void | Rename (string name) |
| Renames the meta solution More... | |
| unsafe void | Solve (NXOpen.CAE.AeroStructures.MarginCalculation[] marginCalculations) |
| Solve the calculations passed in the argument belonging to this solution More... | |
| unsafe void | SolveAll () |
| Solve all the calculations in the solution More... | |
 Public Member Functions inherited from NXOpen.NXObject | |
| unsafe NXOpen.AttributeIterator | CreateAttributeIterator () |
| Create an attribute iterator More... | |
| unsafe void | DeleteAllAttributesByType (NXOpen.NXObject.AttributeType type) |
| Deletes all attributes of a specific type. More... | |
| unsafe void | DeleteAllAttributesByType (NXOpen.NXObject.AttributeType type, NXOpen.Update.Option option) |
| Deletes all attributes of a specific type with the option to update or not. More... | |
| unsafe void | DeleteAttributeByTypeAndTitle (NXOpen.NXObject.AttributeType type, string title) |
| Deletes an attribute by type and title. More... | |
| unsafe void | DeleteAttributeByTypeAndTitle (NXOpen.NXObject.AttributeType type, string title, NXOpen.Update.Option option) |
| Deletes an attribute by type and title with the option to update or not. More... | |
| unsafe void | DeleteUserAttribute (NXOpen.NXObject.AttributeType type, string title, bool deleteEntireArray, NXOpen.Update.Option option) |
| Deletes the first attribute encountered with the given Type, Title. More... | |
| unsafe void | DeleteUserAttributes (NXOpen.AttributeIterator iterator, NXOpen.Update.Option option) |
| Deletes the attributes on the object, if any, that satisfy the given iterator More... | |
| unsafe void | DeleteUserAttributes (NXOpen.NXObject.AttributeType type, NXOpen.Update.Option option) |
| Deletes the attributes encountered with the given Type with option to update or not. More... | |
| unsafe NXOpen.INXObject | FindObject (string journalIdentifier) |
| Finds the NXOpen.NXObject with the given identifier as recorded in a journal. More... | |
| unsafe NXOpen.NXObject.AttributeInformation[] | GetAttributeTitlesByType (NXOpen.NXObject.AttributeType type) |
| Gets all the attribute titles of a specific type. More... | |
| unsafe bool | GetBooleanUserAttribute (string title, int index) |
| Gets a boolean attribute by Title and array Index. More... | |
| unsafe NXOpen.NXObject.ComputationalTime | GetComputationalTimeUserAttribute (string title, int index) |
| Gets a time attribute by Title and array Index. More... | |
| unsafe int | GetIntegerAttribute (string title) |
| Gets an integer attribute by title. More... | |
| unsafe int | GetIntegerUserAttribute (string title, int index) |
| Gets an integer attribute by Title and array Index. More... | |
| unsafe bool | GetNextUserAttribute (NXOpen.AttributeIterator iterator, out NXOpen.NXObject.AttributeInformation info) |
| Gets the next attribute encountered on the object, if any, that satisfies the given iterator. More... | |
| unsafe string | GetPdmReferenceAttributeValue (string attributeTitle) |
| Gets the value of PDM Reference attribute for given object. More... | |
| unsafe double | GetRealAttribute (string title) |
| Gets a real attribute by title. More... | |
| unsafe double | GetRealUserAttribute (string title, int index) |
| Gets a real attribute by Title and array Index. More... | |
| unsafe string | GetReferenceAttribute (string title) |
| Gets the reference string (not the calculated value) of a string attribute that uses a reference string. More... | |
| unsafe string | GetStringAttribute (string title) |
| Gets a string attribute value by title. More... | |
| unsafe string | GetStringUserAttribute (string title, int index) |
| Gets a string attribute by Title and array Index. More... | |
| unsafe string | GetTimeAttribute (NXOpen.NXObject.DateAndTimeFormat format, string title) |
| Gets a time attribute by title. More... | |
| unsafe string | GetTimeUserAttribute (string title, int index) |
| Gets a time attribute by Title and array Index. More... | |
| unsafe NXOpen.NXObject.AttributeInformation | GetUserAttribute (string title, NXOpen.NXObject.AttributeType type, int index) |
| Gets the first attribute encountered on the object, if any, with a given Title, Type and array Index. More... | |
| unsafe NXOpen.NXObject.AttributeInformation[] | GetUserAttribute (string title, bool includeUnset, bool addStringValues, NXOpen.NXObject.AttributeType type) |
| Gets the first attribute (or attribute array) encountered on the object, if any, with a given Title and Type. More... | |
| unsafe string | GetUserAttributeAsString (string title, NXOpen.NXObject.AttributeType type, int index) |
| Gets the first attribute encountered on the object, if any, with a given title, type and array index. More... | |
| unsafe int | GetUserAttributeCount (NXOpen.AttributeIterator iterator) |
| Gets the count of set attributes on the object, if any, that satisfy the given iterator. More... | |
| unsafe int | GetUserAttributeCount (NXOpen.AttributeIterator iterator, bool countArrayAsOneAttribute) |
| Gets the count of set attributes on the object, if any, that satisfy the given iterator. More... | |
| unsafe int | GetUserAttributeCount (NXOpen.NXObject.AttributeType type) |
| Gets the count of set attributes on the object, if any, of the given type. More... | |
| unsafe int | GetUserAttributeCount (NXOpen.NXObject.AttributeType type, bool includeUnset, bool countArrayAsOneAttribute) |
| Gets the count of attributes on the object, if any, of the given type. More... | |
| unsafe bool | GetUserAttributeLock (string title, NXOpen.NXObject.AttributeType type) |
| Determine the lock of the given attribute. More... | |
| unsafe NXOpen.NXObject.AttributeInformation[] | GetUserAttributes (NXOpen.AttributeIterator iterator) |
| Gets all the attributes that have been set on the given object, if any, that satisfy the given iterator. More... | |
| unsafe NXOpen.NXObject.AttributeInformation[] | GetUserAttributes () |
| Gets all the attributes that have been set on the given object. More... | |
| unsafe NXOpen.NXObject.AttributeInformation[] | GetUserAttributes (bool includeUnset) |
| Gets all the attributes of the given object. More... | |
| unsafe NXOpen.NXObject.AttributeInformation[] | GetUserAttributes (bool includeUnset, bool addStringValues) |
| Gets all the attributes of the given object. More... | |
| unsafe string[] | GetUserAttributesAsStrings () |
| Gets all the attributes that have been set on the given object. More... | |
| unsafe int | GetUserAttributeSize (string title, NXOpen.NXObject.AttributeType type) |
| Gets the size of the first attribute encountered on the object, if any, with a given Title and Type. More... | |
| unsafe NXOpen.NXObject[] | GetUserAttributeSourceObjects () |
| Returns an array of objects from which this object presents attributes. More... | |
| unsafe bool | HasUserAttribute (NXOpen.AttributeIterator iterator) |
| Determines if an attribute exists on the object, that satisfies the given iterator More... | |
| unsafe bool | HasUserAttribute (string title, NXOpen.NXObject.AttributeType type, int index) |
| Determines if an attribute with the given Title, Type and array Index is present on the object Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object. More... | |
| unsafe void | Print () |
| Prints a representation of this object to the system log file. More... | |
| unsafe void | SetAttribute (string title, int value) |
| Creates or modifies an integer attribute. More... | |
| unsafe void | SetAttribute (string title, int value, NXOpen.Update.Option option) |
| Creates or modifies an integer attribute with the option to update or not. More... | |
| unsafe void | SetAttribute (string title, double value) |
| Creates or modifies a real attribute. More... | |
| unsafe void | SetAttribute (string title, double value, NXOpen.Update.Option option) |
| Creates or modifies a real attribute with the option to update or not. More... | |
| unsafe void | SetAttribute (string title, string value) |
| Creates or modifies a string attribute. More... | |
| unsafe void | SetAttribute (string title, string value, NXOpen.Update.Option option) |
| Creates or modifies a string attribute with the option to update or not. More... | |
| unsafe void | SetAttribute (string title) |
| Creates or modifies a null attribute which is an attribute with a title and no value. More... | |
| unsafe void | SetAttribute (string title, NXOpen.Update.Option option) |
| Creates or modifies a null attribute with the option to update or not. More... | |
| unsafe void | SetBooleanUserAttribute (string title, int index, bool value, NXOpen.Update.Option option) |
| Creates or modifies a boolean attribute with the option to update or not. More... | |
| unsafe void | SetName (string name) |
| Sets the custom name of the object. More... | |
| unsafe void | SetPdmReferenceAttribute (string attributeTitle, string attributeValue) |
| Sets the value of PDM Reference attribute on the object. More... | |
| unsafe void | SetReferenceAttribute (string title, string value) |
| Creates or modifies a string attribute which uses a reference string. More... | |
| unsafe void | SetReferenceAttribute (string title, string value, NXOpen.Update.Option option) |
| Creates or modifies a string attribute which uses a reference string, with the option to update or not. More... | |
| unsafe void | SetTimeAttribute (string title, string value) |
| Creates or modifies a time attribute. More... | |
| unsafe void | SetTimeAttribute (string title, string value, NXOpen.Update.Option option) |
| Creates or modifies a time attribute with the option to update or not. More... | |
| unsafe void | SetTimeUserAttribute (string title, int index, string value, NXOpen.Update.Option option) |
| Creates or modifies a time attribute with the option to update or not. More... | |
| unsafe void | SetTimeUserAttribute (string title, int index, NXOpen.NXObject.ComputationalTime value, NXOpen.Update.Option option) |
| Creates or modifies a time attribute with the option to update or not. More... | |
| unsafe void | SetUserAttribute (NXOpen.NXObject.AttributeInformation info, NXOpen.Update.Option option) |
| Creates or modifies an attribute with the option to update or not. More... | |
| unsafe void | SetUserAttribute (string title, int index, int value, NXOpen.Update.Option option) |
| Creates or modifies an integer attribute with the option to update or not. More... | |
| unsafe void | SetUserAttribute (string title, int index, double value, NXOpen.Update.Option option) |
| Creates or modifies a real attribute with the option to update or not. More... | |
| unsafe void | SetUserAttribute (string title, int index, string value, NXOpen.Update.Option option) |
| Creates or modifies a string attribute with the option to update or not. More... | |
| unsafe void | SetUserAttribute (string title, int index, NXOpen.Update.Option option) |
| Creates or modifies a null attribute with the option to update or not. More... | |
| unsafe void | SetUserAttributeLock (string title, NXOpen.NXObject.AttributeType type, bool @lock) |
| Lock or unlock the given attribute. More... | |
| Public Member Functions inherited from NXOpen.TaggedObject | |
| void | PrintTestData (String variableName) |
| <exclude> More... | |
| void | PrintTestData (String variableName, int lineNumber) |
| <exclude> More... | |
| override string | ToString () |
| Returns a String that represents the current Object. More... | |
| Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
| Asynchronously processes the given message. More... | |
| IMessage | SyncProcessMessage (IMessage msg) |
| Synchronously processes the given message. More... | |
| Public Member Functions inherited from NXOpen.Report.IReportCollection | |
| void | GetReports (out NXOpen.Report.Report[] pReports) |
| Gets all reports in the report collection. More... | |
Properties | |
| unsafe string | Description [get] |
| Returns the margin solution description More... | |
| NXOpen.CAE.AeroStructures.MarginSolutionLoadCaseCollection | LoadCaseCollection [get] |
| Returns the NXOpen.CAE.AeroStructures.MarginSolutionLoadCaseCollection belonging to this More... | |
| NXOpen.CAE.AeroStructures.LoadCaseSetCollection | LoadCaseSetCollection [get] |
| Returns the NXOpen.CAE.AeroStructures.LoadCaseSetCollection belonging to this More... | |
| NXOpen.CAE.AeroStructures.MarginCalculationCollection | MarginCalculationCollection [get] |
| Returns the NXOpen.CAE.AeroStructures.MarginCalculationCollection belonging to this More... | |
| unsafe NXOpen.CAE.SimSolution | ReferenceSolution [get] |
| Returns the referenced FE-Solution of the AeroStructure solution More... | |
| Properties inherited from NXOpen.NXObject | |
| unsafe bool | IsOccurrence [get] |
| Returns whether this object is an occurrence or not. More... | |
| unsafe string | JournalIdentifier [get] |
| Returns the identifier that would be recorded in a journal for this object. More... | |
| unsafe string | Name [get] |
| Returns the custom name of the object. More... | |
| unsafe NXOpen.Assemblies.Component | OwningComponent [get] |
| Returns the owning component, if this object is an occurrence. More... | |
| unsafe NXOpen.BasePart | OwningPart [get] |
| Returns the owning part of this object More... | |
| unsafe NXOpen.INXObject | Prototype [get] |
| Returns the prototype of this object if it is an occurrence. More... | |
| Properties inherited from NXOpen.TaggedObject | |
| Tag | Tag [get] |
| Returns the tag of this object. More... | |
| Properties inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageSink | NextSink [get] |
| Gets the next message sink in the sink chain. More... | |
| Properties inherited from NXOpen.INXObject | |
| bool | IsOccurrence [get] |
| Returns whether this object is an occurrence or not. More... | |
| string | JournalIdentifier [get] |
| Returns the identifier that would be recorded in a journal for this object. More... | |
| string | Name [get] |
| Returns the custom name of the object. More... | |
| NXOpen.Assemblies.Component | OwningComponent [get] |
| Returns the owning component, if this object is an occurrence. More... | |
| NXOpen.BasePart | OwningPart [get] |
| Returns the owning part of this object More... | |
| NXOpen.INXObject | Prototype [get] |
| Returns the prototype of this object if it is an occurrence. More... | |
Additional Inherited Members | |
| Public Types inherited from NXOpen.NXObject | |
| enum | AttributeType { Invalid, Null, Boolean, Integer, Real, String, Time, Reference, Any = 100 } |
| Specifies attribute type. More... | |
| enum | DateAndTimeFormat { Numeric, Textual } |
| Specifies the format of the date and time attribute. More... | |
| Protected Member Functions inherited from NXOpen.TaggedObject | |
| new void | initialize () |
| <exclude> More... | |
Represents a NXOpen.CAE.AeroStructures.MarginSolution .
To create or edit an instance of this class, use NXOpen.CAE.AeroStructures.MarginSolutionBuilder
Created in NX12.0.0
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing all the results of every calculation that has been solved and belongs to this solution If a non-null CAE.AeroStructures.MarginResultTableRowFilter is passed as argument the results are further post-filtered (after the rank calculation has taken place) according to that filter
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| filter | additional post filter (may be null) |
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing all the results of every calculation passed in the argument that has been solved and belongs to this solution If a non-null CAE.AeroStructures.MarginResultTableRowFilter is passed as argument the results are further post-filtered (after the rank calculation has taken place) according to that filter
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| marginCalculations | The list of calculations from the solution to consider, only the ones with results are taken into account |
| filter | additional post filter (may be null) |
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing all the results of every calculation belonging to this solution that has been solved and that satisfies the following pre-conditions:
If a non-null CAE.AeroStructures.MarginResultTableRowFilter is passed as argument the results are further post-filtered (after the rank calculation has taken place) according to that filter
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| maxRank | the global maximum rank permitted, effectively restricting the number of possible rows in the table |
| maxMS | the maximum margin of safety value permitted |
| filter | additional post filter (may be null) |
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultQuery containing the results of the calculations passed in the argument belonging to this solution that have been solved and that satisfy the following pre-conditions:
If a non-null CAE.AeroStructures.MarginResultTableRowFilter is passed as argument the results are further post-filtered (after the rank calculation has taken place) according to that filter
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| marginCalculations | The list of calculations from the solution to consider, only the ones with results are taken into account |
| maxRank | the global maximum rank permitted, effectively restricting the number of possible rows in the table |
| maxMS | the maximum margin of safety value permitted |
| filter | additional post filter (may be null) |
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider which will be based on every calculation of this solution that has results
Note: no column is registered by default.
Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterAllColumns or Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterColumn should be called after calling this creator
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider Only the subset of calculations given in the argument which have results are taken into account
Note: no column is registered by default.
Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterAllColumns or Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterColumn should be called after calling this creator
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| marginCalculations | The list of calculations from the solution to consider, only the ones with results are taken into account |
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider which will be based on every calculation of this solution that has results and satisfies the following conditions:
Note: no column is registered by default. Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterAllColumns or Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterColumn should be called after calling this creator
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| maxRank | the global maximum rank permitted, effectively restricting the number of possible rows in the table |
| maxMS | the maximum margin of safety value permitted |
|
inline |
Creates a NXOpen.CAE.AeroStructures.MarginResultTableDataProvider Only the subset of calculations given in the argument which have results are taken into account Additionally only results that satisfy the following conditions are taken into account:
Note: no column is registered by default. Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterAllColumns or Methods CAE.AeroStructures.MarginResultTableDataProvider.RegisterColumn should be called after calling this creator
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| marginCalculations | The list of calculations from the solution to consider, only the ones with results are taken into account |
| maxRank | the global maximum rank permitted, effectively restricting the number of possible rows in the table |
| maxMS | the maximum margin of safety value permitted |
|
inline |
Creates an empty NXOpen.CAE.AeroStructures.MarginResultTableRowFilter By default it is a conjunction, meaning that successive conditions added to this filter using AddCondition will be the terms of a conjunction (cond1 AND cond2 AND .
..)
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
inline |
Creates an empty NXOpen.CAE.AeroStructures.MarginResultTableRowFilter Specifying if it is a conjunction or a disjunction and if it is negated or not.
This means that successive conditions added to this filter using AddCondition will be the terms of either a conjunction (cond1 AND cond2 AND ...) or a disjunction (cond1 OR cond2 OR ...) Additionally if isNegated is true the whole conjunction or disjunction is negated: NOT(cond1 AND cond2 AND ...) or NOT(cond1 OR cond2 OR ...)
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| isDisjunction | If true the filter is a disjunction otherwise it is a conjunction |
| isNegated | If true a NOT is applied to the whole conjunction or disjunction |
|
inline |
Creates a Report.Report in this report collection.
NX will not create a report if the report name is empty or existed.
Created in NX11.0.0
License requirements: nx_design_sim ("NX Design Simulation")
| templateFile | Template file name with full path |
| reportName | Report name |
| listError | list error information in listing window |
Implements NXOpen.Report.IReportCollection.
|
inline |
Gets all reports in the report collection.
Created in NX11.0.0
License requirements: nx_design_sim ("NX Design Simulation")
| pReports |
|
inline |
Renames the meta solution
Created in NX12.0.0
License requirements: sc_aero_environment ("Simcenter AeroStructures Environment"), sc_margin_safety ("Simcenter Margin Of Safety")
| name |
|
inline |
Solve the calculations passed in the argument belonging to this solution
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
| marginCalculations | The list of calculations from the solution to solve |
|
inline |
Solve all the calculations in the solution
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the margin solution description
Created in NX12.0.0
License requirements: sc_aero_environment ("Simcenter AeroStructures Environment"), sc_margin_safety ("Simcenter Margin Of Safety")
|
get |
Returns the NXOpen.CAE.AeroStructures.MarginSolutionLoadCaseCollection belonging to this
Created in NX12.0.0
|
get |
Returns the NXOpen.CAE.AeroStructures.LoadCaseSetCollection belonging to this
Created in NX12.0.0
|
get |
Returns the NXOpen.CAE.AeroStructures.MarginCalculationCollection belonging to this
Created in NX12.0.0
|
get |
Returns the referenced FE-Solution of the AeroStructure solution
Created in NX12.0.0
License requirements: sc_aero_environment ("Simcenter AeroStructures Environment"), sc_margin_safety ("Simcenter Margin Of Safety")
