NXOpen .NET Reference Guide
|
Represents a builder class that performs various design element operations. More...
Public Types | |
enum | EditActionType { Category, Partitions, Effectivity } |
Represents the edit action on a design element More... | |
enum | LayerOptionType { Original, Work, AsSpecified } |
Represents the layer option of a design element More... | |
enum | OperationType { Create, Edit, SaveAs, Save, SaveAndClose, Undefined } |
Represents an operation type that can be performed on a design element More... | |
enum | PositioningOption { AbsoluteOrigin, Maintain, AsSpecified } |
Represents the positioning option of a design element. More... | |
enum | ReferenceSetType { Model, EntirePart, AsSpecified } |
Represents the reference set of a design element More... | |
enum | SaveAsActionType { NewRevision, NewDesignElement } |
Represents the save as action on a design element More... | |
enum | StateType { Shape, Reuse, Promissory } |
Represents the state of a design element More... | |
Public Member Functions | |
unsafe void | AddToPartitions (NXOpen.Assemblies.Partition[] partitions) |
Specify partitions to which the design elements will be added. More... | |
unsafe NXOpen.ErrorList | AutoAssignAttributes (NXOpen.NXObject[] objects) |
Auto assigns the attributes for a given array of objects and returns an array of objects that failed to auto assign. More... | |
unsafe NXOpen.ErrorList | AutoAssignAttributesWithNamingPattern (NXOpen.NXObject[] objects, NXOpen.NXObject[] properties) |
Auto assigns the attributes for a given object and returns an array of objects that failed to auto assign. More... | |
unsafe NXOpen.NXObject | CreateAttributeTitleToNamingPatternMap (string[] attributeTitles, string[] titlePatterns) |
Creates a map object of attribute titles to their corresponding naming pattern More... | |
unsafe void | CreateLogicalObjects (out NXOpen.PDM.LogicalObject[] logicalObjects) |
Creates the pre-creation objects for the design elements More... | |
unsafe void | GetAddPartitions (out NXOpen.Assemblies.Partition[] partitions) |
Get the partitions to which the design elements will be added. More... | |
unsafe NXOpen.ErrorList | GetOperationFailures () |
Returns design element operation failures More... | |
unsafe void | GetPosition (out NXOpen.Point3d position, out NXOpen.Matrix3x3 orientation) |
Gets the position of design element More... | |
unsafe void | GetRemovePartitions (out NXOpen.Assemblies.Partition[] partitions) |
Get the partitions from which the design elements will be removed. More... | |
unsafe void | PartiallyCommit (NXOpen.PDM.LogicalObject[] logicalObjects) |
Equivalent to builder Commit call but this one would create design elements with minimal required information. More... | |
unsafe void | RemoveFromPartitions (NXOpen.Assemblies.Partition[] partitions) |
Specify partitions from which the design elements will be removed. More... | |
unsafe void | SetPosition (NXOpen.Point3d position, NXOpen.Matrix3x3 orientation) |
Sets the position of design element. More... | |
Public Member Functions inherited from NXOpen.Builder | |
unsafe NXOpen.NXObject | Commit () |
Commits any edits that have been applied to the builder. More... | |
unsafe void | Destroy () |
Deletes the builder, and cleans up any objects created by the builder. More... | |
unsafe NXOpen.NXObject[] | GetCommittedObjects () |
For builders that create more than one object, this method returns the objects that are created by commit. More... | |
unsafe NXOpen.NXObject | GetObject () |
Returns the object currently being edited by this builder. More... | |
unsafe void | ShowResults () |
Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
unsafe bool | Validate () |
Validate whether the inputs to the component are sufficient for commit to be called. More... | |
Public Member Functions inherited from NXOpen.TaggedObject | |
void | PrintTestData (String variableName) |
<exclude> More... | |
void | PrintTestData (String variableName, int lineNumber) |
<exclude> More... | |
override string | ToString () |
Returns a String that represents the current Object. More... | |
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageCtrl | AsyncProcessMessage (IMessage msg, IMessageSink replySink) |
Asynchronously processes the given message. More... | |
IMessage | SyncProcessMessage (IMessage msg) |
Synchronously processes the given message. More... | |
Properties | |
unsafe int | Count [get, set] |
Returns or sets the number of design elements to be created. More... | |
unsafe NXOpen.SelectDisplayableObjectList | DesignElementsToOperate [get] |
Returns the design elements to operate upon More... | |
unsafe string | DesignElementType [get, set] |
Returns or sets the type of a design element More... | |
unsafe NXOpen.Assemblies.DesignElementBuilder.EditActionType | EditAction [get, set] |
Returns or sets the edit action type on a design element More... | |
unsafe NXOpen.PDM.EffectivityTableBuilder | EffectivityTable [get] |
Returns the effectivity interface of a design element More... | |
unsafe NXOpen.FileNew | FileNewDescriptor [get] |
Returns the file new descriptor to identify a design element More... | |
unsafe bool | KeepOriginalDesignElement [get, set] |
Returns or sets the option determines whether to keep the original design element in the subset during save as More... | |
unsafe int | Layer [get, set] |
Returns or sets the layer value of a design element. More... | |
unsafe NXOpen.Assemblies.DesignElementBuilder.LayerOptionType | LayerOption [get, set] |
Returns or sets the layer option of a design element More... | |
unsafe NXOpen.Assemblies.Subset | OwningSubsetInstance [get, set] |
Returns or sets the owning subset instance More... | |
unsafe NXOpen.BasePart | PartToUse [get, set] |
Returns or sets the part to use of a reuse design element. More... | |
unsafe NXOpen.Assemblies.DesignElementBuilder.PositioningOption | PositioningOptionValue [get, set] |
Returns or sets the positioning option of a design element More... | |
unsafe NXOpen.Assemblies.DesignElementBuilder.ReferenceSetType | ReferenceSet [get, set] |
Returns or sets the reference set of a design element More... | |
unsafe string | ReferenceSetName [get, set] |
Returns or sets the reference set name of a design element. More... | |
unsafe NXOpen.Assemblies.DesignElementBuilder.SaveAsActionType | SaveAsAction [get, set] |
Returns or sets the save as action type of a design element More... | |
unsafe bool | Scatter [get, set] |
Returns or sets the option to determine whether to scatter design elements during creation More... | |
unsafe NXOpen.Assemblies.DesignElementBuilder.StateType | State [get, set] |
Returns or sets the state of a design element More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.TaggedObject | |
new void | initialize () |
<exclude> More... | |
Represents a builder class that performs various design element operations.
The operation can be one of NXOpen.Assemblies.DesignElementBuilder.OperationType
To create a new instance of this class, use NXOpen.CollaborativeContentManager.CreateDesignElementBuilder
Default values.
Property | Value |
---|---|
EditAction |
Partitions |
KeepOriginalDesignElement |
0 |
LayerOption |
Original |
PositioningOptionValue |
Maintain |
ReferenceSet |
EntirePart |
SaveAsAction |
NewRevision |
Created in NX8.5.0
Represents the positioning option of a design element.
Enumerator | |
---|---|
AbsoluteOrigin |
Applies absolute origin position on the design elements |
Maintain |
Maintains the existing positions of the design elements. Applicable only if the edit action type is set to DesignElementBuilder.EditActionType.Category |
AsSpecified |
Applies the specified position on the design elements |
|
inline |
Specify partitions to which the design elements will be added.
The design elements will remain a member of any partitions to which they already belongs. The partitions to which the design elements will be added accumulate if this method is called more than once. If both Assemblies.DesignElementBuilder.AddToPartitions and Assemblies.DesignElementBuilder.RemoveFromPartitions are called with the same partition then the design elements will be added or removed from that partition depending upon which was the last method called.
Created in NX8.5.0
License requirements: nx_4gd_integration ("4th Generation Design")
partitions |
|
inline |
Auto assigns the attributes for a given array of objects and returns an array of objects that failed to auto assign.
Created in NX8.5.0
License requirements: None.
objects |
Implements NXOpen.IAttributeSourceObjectBuilder.
|
inline |
Auto assigns the attributes for a given object and returns an array of objects that failed to auto assign.
properties needs to be created using CreateAttributeTitleToNamingPatternMap
Created in NX12.0.0
License requirements: None.
objects | |
properties |
Implements NXOpen.IAttributeSourceObjectBuilder.
|
inline |
Creates a map object of attribute titles to their corresponding naming pattern
Created in NX12.0.0
License requirements: None.
attributeTitles | |
titlePatterns |
Implements NXOpen.IAttributeSourceObjectBuilder.
|
inline |
Creates the pre-creation objects for the design elements
Created in NX8.5.0
License requirements: nx_4gd_integration ("4th Generation Design")
logicalObjects |
|
inline |
Get the partitions to which the design elements will be added.
Created in NX8.5.0
License requirements: nx_4gd_integration ("4th Generation Design")
partitions |
|
inline |
Returns design element operation failures
Created in NX8.5.0
License requirements: None.
|
inline |
Gets the position of design element
Created in NX8.5.0
License requirements: None.
position | |
orientation |
|
inline |
Get the partitions from which the design elements will be removed.
Created in NX8.5.0
License requirements: nx_4gd_integration ("4th Generation Design")
partitions |
|
inline |
Equivalent to builder Commit call but this one would create design elements with minimal required information.
Can be used only when this NXOpen.Assemblies.DesignElementBuilder has been created with NXOpen.Assemblies.DesignElementBuilder.OperationType.Create . Call to builder Commit is required after this to Commit creation.
Created in NX11.0.0
License requirements: nx_4gd_integration ("4th Generation Design")
logicalObjects |
|
inline |
Specify partitions from which the design elements will be removed.
The partitions from which the design elements will be removed accumulate if this method is called more than once. If both Assemblies.DesignElementBuilder.AddToPartitions and Assemblies.DesignElementBuilder.RemoveFromPartitions are called with the same partition then the design elements will be added or removed from that partition depending upon which was the last method called.
Created in NX8.5.0
License requirements: nx_4gd_integration ("4th Generation Design")
partitions |
|
inline |
Sets the position of design element.
This value is used only when positioning option is DesignElementBuilder.PositioningOption.AsSpecified
Created in NX8.5.0
License requirements: nx_4gd_integration ("4th Generation Design")
position | |
orientation |
|
getset |
Returns or sets the number of design elements to be created.
Applicable only if the operation type is set to DesignElementBuilder.OperationType.Create
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
get |
Returns the design elements to operate upon
Created in NX8.5.0
License requirements: None.
|
getset |
Returns or sets the type of a design element
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the edit action type on a design element
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
get |
Returns the effectivity interface of a design element
Created in NX9.0.0
License requirements: None.
|
get |
Returns the file new descriptor to identify a design element
Created in NX8.5.0
License requirements: None.
|
getset |
Returns or sets the option determines whether to keep the original design element in the subset during save as
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the layer value of a design element.
Applicable only if the layer option is set to DesignElementBuilder.LayerOptionType.AsSpecified
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the layer option of a design element
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the owning subset instance
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the part to use of a reuse design element.
Applicable only if the state is set to DesignElementBuilder.StateType.Reuse
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the positioning option of a design element
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the reference set of a design element
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the reference set name of a design element.
Applicable only if the reference set is set to DesignElementBuilder.ReferenceSetType.AsSpecified
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the save as action type of a design element
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the option to determine whether to scatter design elements during creation
Created in NX9.0.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")
|
getset |
Returns or sets the state of a design element
Created in NX8.5.0
License requirements to get this property: None.
License requirements to set this property: nx_4gd_integration ("4th Generation Design")