MWMoldedPartValidationBuilder Class¶
-
class
NXOpen.Tooling.
MWMoldedPartValidationBuilder
¶ Bases:
NXOpen.Builder
Represents a builder to be used to perform Molded Part Validation analysis.
To create a new instance of this class, use
NXOpen.Tooling.MWMoldedPartValidationManager.CreateMWMoldedPartValidationBuilder()
Default values.
Property Value CalculationOption KeepExisting FaceDraftAngleLimit 3 FaceHighlightSelectedFaces 1 FaceNonSelectedFacesTranslucency 0 FaceSelectAllFaces 0 FaceSelectCrossoverFaces 0 FaceSelectNegativeFaces1 0 FaceSelectNegativeFaces2 0 FaceSelectPositiveFaces1 0 FaceSelectPositiveFaces2 0 FaceSelectUndercutAreas 0 FaceSelectUndercutEdges 0 FaceSelectVerticalFaces 0 FaceSelectedFacesTranslucency 0 InformationCheckScope FaceProperties InformationLowerLimit 0 InformationLowerLimitR01 5.5 InformationLowerLimitR02 5 InformationLowerLimitR03 4.5 InformationLowerLimitR04 4 InformationLowerLimitR05 3.5 InformationLowerLimitR06 3 InformationLowerLimitR07 2.5 InformationLowerLimitR08 2 InformationLowerLimitR09 1.5 InformationLowerLimitR10 1 InformationLowerLimitR11 0.5 InformationLowerLimitR12 0 InformationRangeType Uniform InformationSharpAngleLimit 6 InformationShowBoundaryEdges 0 InformationShowRangeR01 0 InformationShowRangeR02 0 InformationShowRangeR03 0 InformationShowRangeR04 0 InformationShowRangeR05 0 InformationShowRangeR06 0 InformationShowRangeR07 0 InformationShowRangeR08 0 InformationShowRangeR09 0 InformationShowRangeR10 0 InformationShowRangeR11 0 InformationShowRangeR12 0 InformationShowSharpEdges 0 InformationUpperLimit 6 InformationUpperLimitR01 6 InformationUpperLimitR02 5.5 InformationUpperLimitR03 5 InformationUpperLimitR04 4.5 InformationUpperLimitR05 4 InformationUpperLimitR06 3.5 InformationUpperLimitR07 3 InformationUpperLimitR08 2.5 InformationUpperLimitR09 2 InformationUpperLimitR10 0.5 InformationUpperLimitR11 1 InformationUpperLimitR12 0.5 InformationUseSingleTolerance 0 RegionAssignToRegionOption CavityRegion RegionCavityRegionTranslucency 0 RegionCoreRegionTranslucency 0 RegionSelectCrossoverRegionFaces 0 RegionSelectCrossoverVerticalFaces 0 RegionSelectUnknownFaces 0 RegionShowIncompleteLoops 1 RegionShowInternalLoops 1 RegionShowPartingEdges 1 New in version NX8.0.0.
Properties¶
Property | Description |
---|---|
ActiveTabPage | Returns or sets the active tab page. |
CalculationDrawDirection | Returns or sets the draw direction on the Calculate Tab page. |
CalculationOption | Returns or sets the calculation option on the Calculate Tab page. |
CalculationProductBody | Returns the product body to be analyzed on the Calculate Tab page. |
FaceAllFacesColor | Returns or sets the color for applying to all faces on the Face Tab page. |
FaceCrossoverFacesColor | Returns or sets the color for applying to the crossover faces on the Face Tab page. |
FaceDraftAngleLimit | Returns or sets the draft angle limit on the Face Tab page. |
FaceHighlightSelectedFaces | Returns or sets the option for highlighting the selected faces on the Face Tab page. |
FaceNegativeFacesColor1 | Returns or sets the color for applying to the negative small radius faces on the Face Tab page. |
FaceNegativeFacesColor2 | Returns or sets the color for applying to the negative faces on the Face Tab page. |
FaceNonSelectedFacesTranslucency | Returns or sets the translucency for the non-selected faces on the Face Tab page. |
FacePositiveFacesColor1 | Returns or sets the color for applying to the positive faces on the Face Tab page. |
FacePositiveFacesColor2 | Returns or sets the color for applying to the positive small radius faces on the Face Tab page. |
FaceSelectAllFaces | Returns or sets the option for turning on/off the selection of all faces on the Face Tab page. |
FaceSelectCrossoverFaces | Returns or sets the option for turning on/off the highlight of the crossover faces on the Face Tab page. |
FaceSelectNegativeFaces1 | Returns or sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page. |
FaceSelectNegativeFaces2 | Returns or sets the option for turning on/off the highlight of the negative faces on the Face Tab page. |
FaceSelectPositiveFaces1 | Returns or sets the option for turning on/off the highlight of the positive faces on the Face Tab page. |
FaceSelectPositiveFaces2 | Returns or sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page. |
FaceSelectUndercutAreas | Returns or sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page. |
FaceSelectUndercutEdges | Returns or sets the option for turning on/off the highlight of the undercut edges on the Face Tab page. |
FaceSelectVerticalFaces | Returns or sets the option for turning on/off the highlight of the vertical faces on the Face Tab page. |
FaceSelectedFacesTranslucency | Returns or sets the translucency for the selected faces on the Face Tab page. |
FaceUndercutAreasColor | Returns or sets the color for applying to the undercut area faces on the Face Tab page. |
FaceUndercutEdgesColor | Returns or sets the color for applying to the undercut edges on the Face Tab page. |
FaceVerticalFacesColor | Returns or sets the color for applying to the vertical faces on the Face Tab page. |
InApplyStatus | Returns or sets the flag that indicates the Apply status of the command, needed only in the interactive environment. |
InformationCheckScope | Returns or sets the check scope on the Information Tab page. |
InformationColorR01 | Returns or sets the color of row 1 for the small radius faces on the Information Tab page. |
InformationColorR02 | Returns or sets the color of row 2 for the small radius faces on the Information Tab page. |
InformationColorR03 | Returns or sets the color of row 3 for the small radius faces on the Information Tab page. |
InformationColorR04 | Returns or sets the color of row 4 for the small radius faces on the Information Tab page. |
InformationColorR05 | Returns or sets the color of row 5 for the small radius faces on the Information Tab page. |
InformationColorR06 | Returns or sets the color of row 6 for the small radius faces on the Information Tab page. |
InformationColorR07 | Returns or sets the color of row 7 for the small radius faces on the Information Tab page. |
InformationColorR08 | Returns or sets the color of row 8 for the small radius faces on the Information Tab page. |
InformationColorR09 | Returns or sets the color of row 9 for the small radius faces on the Information Tab page. |
InformationColorR10 | Returns or sets the color of row 10 for the small radius faces on the Information Tab page. |
InformationColorR11 | Returns or sets the color of row 11 for the small radius faces on the Information Tab page. |
InformationColorR12 | Returns or sets the color of row 12 for the small radius faces on the Information Tab page. |
InformationInspectFace | Returns the face selected face for displaying the face properties. |
InformationLowerLimit | Returns or sets the lower limit of the range limit values on the Information Tab page. |
InformationLowerLimitR01 | Returns or sets the lower limit of row 1 for the small radius faces on the Information Tab page. |
InformationLowerLimitR02 | Returns or sets the lower limit of row 2 for the small radius faces on the Information Tab page. |
InformationLowerLimitR03 | Returns or sets the lower limit of row 3 for the small radius faces on the Information Tab page. |
InformationLowerLimitR04 | Returns or sets the lower limit of row 4 for the small radius faces on the Information Tab page. |
InformationLowerLimitR05 | Returns or sets the lower limit of row 5 for the small radius faces on the Information Tab page. |
InformationLowerLimitR06 | Returns or sets the lower limit of row 6 for the small radius faces on the Information Tab page. |
InformationLowerLimitR07 | Returns or sets the lower limit of row 7 for the small radius faces on the Information Tab page. |
InformationLowerLimitR08 | Returns or sets the lower limit of row 8 for the small radius faces on the Information Tab page. |
InformationLowerLimitR09 | Returns or sets the lower limit of row 9 for the small radius faces on the Information Tab page. |
InformationLowerLimitR10 | Returns or sets the lower limit of row 10 for the small radius faces on the Information Tab page. |
InformationLowerLimitR11 | Returns or sets the lower limit of row 11 for the small radius faces on the Information Tab page. |
InformationLowerLimitR12 | Returns or sets the lower limit of row 12 for the small radius faces on the Information Tab page. |
InformationRangeType | Returns or sets the range type on the Information Tab page. |
InformationSharpAngleLimit | Returns or sets the sharp angle limit on the Information Tab page. |
InformationShowBoundaryEdges | Returns or sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page. |
InformationShowRangeR01 | Returns or sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page. |
InformationShowRangeR02 | Returns or sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page. |
InformationShowRangeR03 | Returns or sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page. |
InformationShowRangeR04 | Returns or sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page. |
InformationShowRangeR05 | Returns or sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page. |
InformationShowRangeR06 | Returns or sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page. |
InformationShowRangeR07 | Returns or sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page. |
InformationShowRangeR08 | Returns or sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page. |
InformationShowRangeR09 | Returns or sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page. |
InformationShowRangeR10 | Returns or sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page. |
InformationShowRangeR11 | Returns or sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page. |
InformationShowRangeR12 | Returns or sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page. |
InformationShowSharpEdges | Returns or sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page. |
InformationUpperLimit | Returns or sets the upper limit on the Information Tab page. |
InformationUpperLimitR01 | Returns or sets the upper limit of row 1 for the small radius faces on the Information Tab page. |
InformationUpperLimitR02 | Returns or sets the upper limit of row 2 for the small radius faces on the Information Tab page. |
InformationUpperLimitR03 | Returns or sets the upper limit of row 3 for the small radius faces on the Information Tab page. |
InformationUpperLimitR04 | Returns or sets the upper limit of row 4 for the small radius faces on the Information Tab page. |
InformationUpperLimitR05 | Returns or sets the upper limit of row 5 for the small radius faces on the Information Tab page. |
InformationUpperLimitR06 | Returns or sets the upper limit of row 6 for the small radius faces on the Information Tab page. |
InformationUpperLimitR07 | Returns or sets the upper limit of row 7 for the small radius faces on the Information Tab page. |
InformationUpperLimitR08 | Returns or sets the upper limit of row 8 for the small radius faces on the Information Tab page. |
InformationUpperLimitR09 | Returns or sets the upper limit of row 9 for the small radius faces on the Information Tab page. |
InformationUpperLimitR10 | Returns or sets the upper limit of row 10 for the small radius faces on the Information Tab page. |
InformationUpperLimitR11 | Returns or sets the upper limit of row 11 for the small radius faces on the Information Tab page. |
InformationUpperLimitR12 | Returns or sets the upper limit of row 12 for the small radius faces on the Information Tab page. |
InformationUseSingleTolerance | Returns or sets the option for using a single tolerance for defining the range limit values on the Information Tab page. |
RegionAssignToRegionOption | Returns or sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page. |
RegionCavityRegionColor | Returns or sets the color for applying to the cavity region faces on the Region Tab page. |
RegionCavityRegionTranslucency | Returns or sets the translucency for applying to the cavity region faces on the Region Tab page. |
RegionCoreRegionColor | Returns or sets the color for applying to the core region faces on the Region Tab page. |
RegionCoreRegionTranslucency | Returns or sets the translucency for applying to the core region faces on the Region Tab page. |
RegionFaces | Returns the faces selected for assigning to the cavity or core region. |
RegionSelectCrossoverRegionFaces | Returns or sets the option for including or removing the crossover region faces in the selection on the Region Tab page. |
RegionSelectCrossoverVerticalFaces | Returns or sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page. |
RegionSelectUnknownFaces | Returns or sets the option for including or removing the unknown faces in the selection on the Region Tab page. |
RegionShowIncompleteLoops | Returns or sets the option for turning on/off the highlight of the incomplete loop edges. |
RegionShowInternalLoops | Returns or sets the option for turning on/off the highlight of the internal loop edges. |
RegionShowPartingEdges | Returns or sets the option for turning on/off the highlight of the parting edges. |
RegionUndefinedRegionColor | Returns or sets the color for applying to the undefined region faces on the Region Tab page. |
Tag | Returns the Tag for this object. |
Methods¶
Method | Description |
---|---|
Calculate | Calculate button on the Calculate Tab page. |
Commit | Commits any edits that have been applied to the builder. |
Destroy | Deletes the builder, and cleans up any objects created by the builder. |
FaceSetAllFacesColor | Action button for setting color on all faces on the Face Tab page. |
GetCommittedObjects | For builders that create more than one object, this method returns the objects that are created by commit. |
GetObject | Returns the object currently being edited by this builder. |
InitMpvData | Initialize the MPV data for performing analysis in Molded Part Validation. |
PerformModelPropertiesCalculation | Perform model properties calculation if the calculation has not been performed before. |
PerformSharpCornersCalculation | Perform the sharp corners calculation if the calculation has not been performed before. |
ProcessFaceSplit | Action button for invoking the Split Face command on the Face Tab page. |
RegionSetRegionsColor | Action button for setting color on the cavity, core and undefined region faces on the Region Tab page. |
SetCalculationProductBody | Set the product body to be analyzed on the Calculate Tab page. |
ShowResults | Updates the model to reflect the result of an edit to the model for all builders that support showing results. |
UpdateEjectDirection | Update the eject direction. |
UpdateMpvData | Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog. |
UpdateSharpEdgesInformation | Update the sharp edges information based on the new sharp angle limit which has been changed by the user. |
UpdateSmallRadiusFacesInformation | Update the small radius faces information based on the new range limits of the radius which has been changed by the user. |
Validate | Validate whether the inputs to the component are sufficient for commit to be called. |
Enumerations¶
MWMoldedPartValidationBuilderAssignToRegion Enumeration | Options for assigning faces to the Cavity or Core region |
MWMoldedPartValidationBuilderCalculateOption Enumeration | Calculation options |
MWMoldedPartValidationBuilderCheckScope Enumeration | Check scope for information |
MWMoldedPartValidationBuilderRangeType Enumeration | Range type for displaying small corner radius faces |
Property Detail¶
ActiveTabPage¶
-
MWMoldedPartValidationBuilder.
ActiveTabPage
¶ Returns or sets the active tab page.
-------------------------------------
Getter Method
Signature
ActiveTabPage
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
ActiveTabPage
Parameters: activeTabPage (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
CalculationDrawDirection¶
-
MWMoldedPartValidationBuilder.
CalculationDrawDirection
¶ Returns or sets the draw direction on the Calculate Tab page.
-------------------------------------
Getter Method
Signature
CalculationDrawDirection
Returns: Return type: NXOpen.Direction
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
CalculationDrawDirection
Parameters: calculationDrawDirection ( NXOpen.Direction
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
CalculationOption¶
-
MWMoldedPartValidationBuilder.
CalculationOption
¶ Returns or sets the calculation option on the Calculate Tab page.
-------------------------------------
Getter Method
Signature
CalculationOption
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderCalculateOption
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
CalculationOption
Parameters: calculationOption ( NXOpen.Tooling.MWMoldedPartValidationBuilderCalculateOption
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
CalculationProductBody¶
-
MWMoldedPartValidationBuilder.
CalculationProductBody
¶ Returns the product body to be analyzed on the Calculate Tab page.
-------------------------------------
Getter Method
Signature
CalculationProductBody
Returns: Return type: NXOpen.SelectBody
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceAllFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceAllFacesColor
¶ Returns or sets the color for applying to all faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceAllFacesColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceAllFacesColor
Parameters: faceAllFacesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceCrossoverFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceCrossoverFacesColor
¶ Returns or sets the color for applying to the crossover faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceCrossoverFacesColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceCrossoverFacesColor
Parameters: faceCrossoverFacesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceDraftAngleLimit¶
-
MWMoldedPartValidationBuilder.
FaceDraftAngleLimit
¶ Returns or sets the draft angle limit on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceDraftAngleLimit
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceDraftAngleLimit
Parameters: faceDraftAngleLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceHighlightSelectedFaces¶
-
MWMoldedPartValidationBuilder.
FaceHighlightSelectedFaces
¶ Returns or sets the option for highlighting the selected faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceHighlightSelectedFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceHighlightSelectedFaces
Parameters: faceHighlightSelectedFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceNegativeFacesColor1¶
-
MWMoldedPartValidationBuilder.
FaceNegativeFacesColor1
¶ Returns or sets the color for applying to the negative small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceNegativeFacesColor1
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceNegativeFacesColor1
Parameters: faceNegativeFacesColor1 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceNegativeFacesColor2¶
-
MWMoldedPartValidationBuilder.
FaceNegativeFacesColor2
¶ Returns or sets the color for applying to the negative faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceNegativeFacesColor2
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceNegativeFacesColor2
Parameters: faceNegativeFacesColor2 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceNonSelectedFacesTranslucency¶
-
MWMoldedPartValidationBuilder.
FaceNonSelectedFacesTranslucency
¶ Returns or sets the translucency for the non-selected faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceNonSelectedFacesTranslucency
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceNonSelectedFacesTranslucency
Parameters: faceNonSelectedFacesTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FacePositiveFacesColor1¶
-
MWMoldedPartValidationBuilder.
FacePositiveFacesColor1
¶ Returns or sets the color for applying to the positive faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FacePositiveFacesColor1
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FacePositiveFacesColor1
Parameters: facePositiveFacesColor1 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FacePositiveFacesColor2¶
-
MWMoldedPartValidationBuilder.
FacePositiveFacesColor2
¶ Returns or sets the color for applying to the positive small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FacePositiveFacesColor2
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FacePositiveFacesColor2
Parameters: facePositiveFacesColor2 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectAllFaces¶
-
MWMoldedPartValidationBuilder.
FaceSelectAllFaces
¶ Returns or sets the option for turning on/off the selection of all faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectAllFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectAllFaces
Parameters: faceSelectAllFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectCrossoverFaces¶
-
MWMoldedPartValidationBuilder.
FaceSelectCrossoverFaces
¶ Returns or sets the option for turning on/off the highlight of the crossover faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectCrossoverFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectCrossoverFaces
Parameters: faceSelectCrossoverFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectNegativeFaces1¶
-
MWMoldedPartValidationBuilder.
FaceSelectNegativeFaces1
¶ Returns or sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectNegativeFaces1
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectNegativeFaces1
Parameters: faceSelectNegativeFaces1 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectNegativeFaces2¶
-
MWMoldedPartValidationBuilder.
FaceSelectNegativeFaces2
¶ Returns or sets the option for turning on/off the highlight of the negative faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectNegativeFaces2
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectNegativeFaces2
Parameters: faceSelectNegativeFaces2 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectPositiveFaces1¶
-
MWMoldedPartValidationBuilder.
FaceSelectPositiveFaces1
¶ Returns or sets the option for turning on/off the highlight of the positive faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectPositiveFaces1
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectPositiveFaces1
Parameters: faceSelectPositiveFaces1 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectPositiveFaces2¶
-
MWMoldedPartValidationBuilder.
FaceSelectPositiveFaces2
¶ Returns or sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectPositiveFaces2
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectPositiveFaces2
Parameters: faceSelectPositiveFaces2 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectUndercutAreas¶
-
MWMoldedPartValidationBuilder.
FaceSelectUndercutAreas
¶ Returns or sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectUndercutAreas
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectUndercutAreas
Parameters: faceSelectUndercutAreas (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectUndercutEdges¶
-
MWMoldedPartValidationBuilder.
FaceSelectUndercutEdges
¶ Returns or sets the option for turning on/off the highlight of the undercut edges on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectUndercutEdges
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectUndercutEdges
Parameters: faceSelectUndercutEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectVerticalFaces¶
-
MWMoldedPartValidationBuilder.
FaceSelectVerticalFaces
¶ Returns or sets the option for turning on/off the highlight of the vertical faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectVerticalFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectVerticalFaces
Parameters: faceSelectVerticalFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSelectedFacesTranslucency¶
-
MWMoldedPartValidationBuilder.
FaceSelectedFacesTranslucency
¶ Returns or sets the translucency for the selected faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceSelectedFacesTranslucency
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceSelectedFacesTranslucency
Parameters: faceSelectedFacesTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceUndercutAreasColor¶
-
MWMoldedPartValidationBuilder.
FaceUndercutAreasColor
¶ Returns or sets the color for applying to the undercut area faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceUndercutAreasColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceUndercutAreasColor
Parameters: faceUndercutAreasColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceUndercutEdgesColor¶
-
MWMoldedPartValidationBuilder.
FaceUndercutEdgesColor
¶ Returns or sets the color for applying to the undercut edges on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceUndercutEdgesColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceUndercutEdgesColor
Parameters: faceUndercutEdgesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceVerticalFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceVerticalFacesColor
¶ Returns or sets the color for applying to the vertical faces on the Face Tab page.
-------------------------------------
Getter Method
Signature
FaceVerticalFacesColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
FaceVerticalFacesColor
Parameters: faceVerticalFacesColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InApplyStatus¶
-
MWMoldedPartValidationBuilder.
InApplyStatus
¶ Returns or sets the flag that indicates the Apply status of the command, needed only in the interactive environment.
0: “Apply” has not been done before; 1: “Apply” has been done before.
-------------------------------------
Getter Method
Signature
InApplyStatus
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InApplyStatus
Parameters: inApplyStatus (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationCheckScope¶
-
MWMoldedPartValidationBuilder.
InformationCheckScope
¶ Returns or sets the check scope on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationCheckScope
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderCheckScope
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationCheckScope
Parameters: informationCheckScope ( NXOpen.Tooling.MWMoldedPartValidationBuilderCheckScope
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR01¶
-
MWMoldedPartValidationBuilder.
InformationColorR01
¶ Returns or sets the color of row 1 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR01
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR01
Parameters: informationColorR01 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR02¶
-
MWMoldedPartValidationBuilder.
InformationColorR02
¶ Returns or sets the color of row 2 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR02
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR02
Parameters: informationColorR02 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR03¶
-
MWMoldedPartValidationBuilder.
InformationColorR03
¶ Returns or sets the color of row 3 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR03
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR03
Parameters: informationColorR03 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR04¶
-
MWMoldedPartValidationBuilder.
InformationColorR04
¶ Returns or sets the color of row 4 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR04
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR04
Parameters: informationColorR04 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR05¶
-
MWMoldedPartValidationBuilder.
InformationColorR05
¶ Returns or sets the color of row 5 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR05
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR05
Parameters: informationColorR05 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR06¶
-
MWMoldedPartValidationBuilder.
InformationColorR06
¶ Returns or sets the color of row 6 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR06
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR06
Parameters: informationColorR06 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR07¶
-
MWMoldedPartValidationBuilder.
InformationColorR07
¶ Returns or sets the color of row 7 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR07
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR07
Parameters: informationColorR07 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR08¶
-
MWMoldedPartValidationBuilder.
InformationColorR08
¶ Returns or sets the color of row 8 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR08
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR08
Parameters: informationColorR08 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR09¶
-
MWMoldedPartValidationBuilder.
InformationColorR09
¶ Returns or sets the color of row 9 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR09
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR09
Parameters: informationColorR09 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR10¶
-
MWMoldedPartValidationBuilder.
InformationColorR10
¶ Returns or sets the color of row 10 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR10
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR10
Parameters: informationColorR10 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR11¶
-
MWMoldedPartValidationBuilder.
InformationColorR11
¶ Returns or sets the color of row 11 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR11
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR11
Parameters: informationColorR11 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationColorR12¶
-
MWMoldedPartValidationBuilder.
InformationColorR12
¶ Returns or sets the color of row 12 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationColorR12
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationColorR12
Parameters: informationColorR12 (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationInspectFace¶
-
MWMoldedPartValidationBuilder.
InformationInspectFace
¶ Returns the face selected face for displaying the face properties.
-------------------------------------
Getter Method
Signature
InformationInspectFace
Returns: Return type: NXOpen.SelectFace
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimit¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimit
¶ Returns or sets the lower limit of the range limit values on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimit
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimit
Parameters: informationLowerLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR01¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR01
¶ Returns or sets the lower limit of row 1 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR01
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR01
Parameters: informationLowerLimitR01 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR02¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR02
¶ Returns or sets the lower limit of row 2 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR02
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR02
Parameters: informationLowerLimitR02 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR03¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR03
¶ Returns or sets the lower limit of row 3 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR03
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR03
Parameters: informationLowerLimitR03 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR04¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR04
¶ Returns or sets the lower limit of row 4 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR04
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR04
Parameters: informationLowerLimitR04 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR05¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR05
¶ Returns or sets the lower limit of row 5 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR05
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR05
Parameters: informationLowerLimitR05 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR06¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR06
¶ Returns or sets the lower limit of row 6 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR06
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR06
Parameters: informationLowerLimitR06 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR07¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR07
¶ Returns or sets the lower limit of row 7 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR07
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR07
Parameters: informationLowerLimitR07 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR08¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR08
¶ Returns or sets the lower limit of row 8 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR08
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR08
Parameters: informationLowerLimitR08 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR09¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR09
¶ Returns or sets the lower limit of row 9 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR09
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR09
Parameters: informationLowerLimitR09 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR10¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR10
¶ Returns or sets the lower limit of row 10 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR10
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR10
Parameters: informationLowerLimitR10 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR11¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR11
¶ Returns or sets the lower limit of row 11 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR11
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR11
Parameters: informationLowerLimitR11 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationLowerLimitR12¶
-
MWMoldedPartValidationBuilder.
InformationLowerLimitR12
¶ Returns or sets the lower limit of row 12 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationLowerLimitR12
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationLowerLimitR12
Parameters: informationLowerLimitR12 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationRangeType¶
-
MWMoldedPartValidationBuilder.
InformationRangeType
¶ Returns or sets the range type on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationRangeType
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderRangeType
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationRangeType
Parameters: informationRangeType ( NXOpen.Tooling.MWMoldedPartValidationBuilderRangeType
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationSharpAngleLimit¶
-
MWMoldedPartValidationBuilder.
InformationSharpAngleLimit
¶ Returns or sets the sharp angle limit on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationSharpAngleLimit
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationSharpAngleLimit
Parameters: informationSharpAngleLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowBoundaryEdges¶
-
MWMoldedPartValidationBuilder.
InformationShowBoundaryEdges
¶ Returns or sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowBoundaryEdges
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowBoundaryEdges
Parameters: informationShowBoundaryEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR01¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR01
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR01
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR01
Parameters: informationShowRangeR01 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR02¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR02
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR02
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR02
Parameters: informationShowRangeR02 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR03¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR03
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR03
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR03
Parameters: informationShowRangeR03 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR04¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR04
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR04
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR04
Parameters: informationShowRangeR04 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR05¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR05
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR05
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR05
Parameters: informationShowRangeR05 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR06¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR06
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR06
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR06
Parameters: informationShowRangeR06 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR07¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR07
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR07
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR07
Parameters: informationShowRangeR07 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR08¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR08
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR08
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR08
Parameters: informationShowRangeR08 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR09¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR09
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR09
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR09
Parameters: informationShowRangeR09 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR10¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR10
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR10
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR10
Parameters: informationShowRangeR10 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR11¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR11
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR11
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR11
Parameters: informationShowRangeR11 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowRangeR12¶
-
MWMoldedPartValidationBuilder.
InformationShowRangeR12
¶ Returns or sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowRangeR12
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowRangeR12
Parameters: informationShowRangeR12 (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationShowSharpEdges¶
-
MWMoldedPartValidationBuilder.
InformationShowSharpEdges
¶ Returns or sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationShowSharpEdges
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationShowSharpEdges
Parameters: informationShowSharpEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimit¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimit
¶ Returns or sets the upper limit on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimit
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimit
Parameters: informationUpperLimit (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR01¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR01
¶ Returns or sets the upper limit of row 1 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR01
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR01
Parameters: informationUpperLimitR01 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR02¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR02
¶ Returns or sets the upper limit of row 2 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR02
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR02
Parameters: informationUpperLimitR02 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR03¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR03
¶ Returns or sets the upper limit of row 3 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR03
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR03
Parameters: informationUpperLimitR03 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR04¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR04
¶ Returns or sets the upper limit of row 4 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR04
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR04
Parameters: informationUpperLimitR04 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR05¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR05
¶ Returns or sets the upper limit of row 5 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR05
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR05
Parameters: informationUpperLimitR05 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR06¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR06
¶ Returns or sets the upper limit of row 6 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR06
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR06
Parameters: informationUpperLimitR06 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR07¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR07
¶ Returns or sets the upper limit of row 7 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR07
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR07
Parameters: informationUpperLimitR07 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR08¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR08
¶ Returns or sets the upper limit of row 8 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR08
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR08
Parameters: informationUpperLimitR08 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR09¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR09
¶ Returns or sets the upper limit of row 9 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR09
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR09
Parameters: informationUpperLimitR09 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR10¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR10
¶ Returns or sets the upper limit of row 10 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR10
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR10
Parameters: informationUpperLimitR10 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR11¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR11
¶ Returns or sets the upper limit of row 11 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR11
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR11
Parameters: informationUpperLimitR11 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUpperLimitR12¶
-
MWMoldedPartValidationBuilder.
InformationUpperLimitR12
¶ Returns or sets the upper limit of row 12 for the small radius faces on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUpperLimitR12
Returns: Return type: float New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUpperLimitR12
Parameters: informationUpperLimitR12 (float) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InformationUseSingleTolerance¶
-
MWMoldedPartValidationBuilder.
InformationUseSingleTolerance
¶ Returns or sets the option for using a single tolerance for defining the range limit values on the Information Tab page.
-------------------------------------
Getter Method
Signature
InformationUseSingleTolerance
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
InformationUseSingleTolerance
Parameters: informationUseSingleTolerance (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionAssignToRegionOption¶
-
MWMoldedPartValidationBuilder.
RegionAssignToRegionOption
¶ Returns or sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionAssignToRegionOption
Returns: Return type: NXOpen.Tooling.MWMoldedPartValidationBuilderAssignToRegion
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionAssignToRegionOption
Parameters: regionAssignToRegionOption ( NXOpen.Tooling.MWMoldedPartValidationBuilderAssignToRegion
) –New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCavityRegionColor¶
-
MWMoldedPartValidationBuilder.
RegionCavityRegionColor
¶ Returns or sets the color for applying to the cavity region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCavityRegionColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCavityRegionColor
Parameters: regionCavityRegionColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCavityRegionTranslucency¶
-
MWMoldedPartValidationBuilder.
RegionCavityRegionTranslucency
¶ Returns or sets the translucency for applying to the cavity region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCavityRegionTranslucency
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCavityRegionTranslucency
Parameters: regionCavityRegionTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCoreRegionColor¶
-
MWMoldedPartValidationBuilder.
RegionCoreRegionColor
¶ Returns or sets the color for applying to the core region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCoreRegionColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCoreRegionColor
Parameters: regionCoreRegionColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionCoreRegionTranslucency¶
-
MWMoldedPartValidationBuilder.
RegionCoreRegionTranslucency
¶ Returns or sets the translucency for applying to the core region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionCoreRegionTranslucency
Returns: Return type: int New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionCoreRegionTranslucency
Parameters: regionCoreRegionTranslucency (int) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionFaces¶
-
MWMoldedPartValidationBuilder.
RegionFaces
¶ Returns the faces selected for assigning to the cavity or core region.
-------------------------------------
Getter Method
Signature
RegionFaces
Returns: Return type: NXOpen.SelectFaceList
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSelectCrossoverRegionFaces¶
-
MWMoldedPartValidationBuilder.
RegionSelectCrossoverRegionFaces
¶ Returns or sets the option for including or removing the crossover region faces in the selection on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionSelectCrossoverRegionFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionSelectCrossoverRegionFaces
Parameters: regionSelectCrossoverRegionFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSelectCrossoverVerticalFaces¶
-
MWMoldedPartValidationBuilder.
RegionSelectCrossoverVerticalFaces
¶ Returns or sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionSelectCrossoverVerticalFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionSelectCrossoverVerticalFaces
Parameters: regionSelectCrossoverVerticalFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSelectUnknownFaces¶
-
MWMoldedPartValidationBuilder.
RegionSelectUnknownFaces
¶ Returns or sets the option for including or removing the unknown faces in the selection on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionSelectUnknownFaces
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionSelectUnknownFaces
Parameters: regionSelectUnknownFaces (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionShowIncompleteLoops¶
-
MWMoldedPartValidationBuilder.
RegionShowIncompleteLoops
¶ Returns or sets the option for turning on/off the highlight of the incomplete loop edges.
-------------------------------------
Getter Method
Signature
RegionShowIncompleteLoops
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionShowIncompleteLoops
Parameters: regionShowIncompleteLoops (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionShowInternalLoops¶
-
MWMoldedPartValidationBuilder.
RegionShowInternalLoops
¶ Returns or sets the option for turning on/off the highlight of the internal loop edges.
-------------------------------------
Getter Method
Signature
RegionShowInternalLoops
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionShowInternalLoops
Parameters: regionShowInternalLoops (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionShowPartingEdges¶
-
MWMoldedPartValidationBuilder.
RegionShowPartingEdges
¶ Returns or sets the option for turning on/off the highlight of the parting edges.
-------------------------------------
Getter Method
Signature
RegionShowPartingEdges
Returns: Return type: bool New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionShowPartingEdges
Parameters: regionShowPartingEdges (bool) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionUndefinedRegionColor¶
-
MWMoldedPartValidationBuilder.
RegionUndefinedRegionColor
¶ Returns or sets the color for applying to the undefined region faces on the Region Tab page.
-------------------------------------
Getter Method
Signature
RegionUndefinedRegionColor
Returns: Return type: Id New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
-------------------------------------
Setter Method
Signature
RegionUndefinedRegionColor
Parameters: regionUndefinedRegionColor (Id) – New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
Method Detail¶
Calculate¶
-
MWMoldedPartValidationBuilder.
Calculate
¶ Calculate button on the Calculate Tab page.
Signature
Calculate()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
FaceSetAllFacesColor¶
-
MWMoldedPartValidationBuilder.
FaceSetAllFacesColor
¶ Action button for setting color on all faces on the Face Tab page.
Signature
FaceSetAllFacesColor()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
InitMpvData¶
-
MWMoldedPartValidationBuilder.
InitMpvData
¶ Initialize the MPV data for performing analysis in Molded Part Validation.
Signature
InitMpvData(changeBody)
Parameters: changeBody (int) – 0: No change in the selected body; 1: Change in the selected body; 2: Change in direction for the selected body. New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
PerformModelPropertiesCalculation¶
-
MWMoldedPartValidationBuilder.
PerformModelPropertiesCalculation
¶ Perform model properties calculation if the calculation has not been performed before.
Signature
PerformModelPropertiesCalculation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
PerformSharpCornersCalculation¶
-
MWMoldedPartValidationBuilder.
PerformSharpCornersCalculation
¶ Perform the sharp corners calculation if the calculation has not been performed before.
Signature
PerformSharpCornersCalculation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
ProcessFaceSplit¶
-
MWMoldedPartValidationBuilder.
ProcessFaceSplit
¶ Action button for invoking the Split Face command on the Face Tab page.
Signature
ProcessFaceSplit()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
RegionSetRegionsColor¶
-
MWMoldedPartValidationBuilder.
RegionSetRegionsColor
¶ Action button for setting color on the cavity, core and undefined region faces on the Region Tab page.
Signature
RegionSetRegionsColor()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
SetCalculationProductBody¶
-
MWMoldedPartValidationBuilder.
SetCalculationProductBody
¶ Set the product body to be analyzed on the Calculate Tab page.
Signature
SetCalculationProductBody(calculationProductBody)
Parameters: calculationProductBody ( NXOpen.Body
) – The product bodyNew in version NX10.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateEjectDirection¶
-
MWMoldedPartValidationBuilder.
UpdateEjectDirection
¶ Update the eject direction.
Signature
UpdateEjectDirection()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateMpvData¶
-
MWMoldedPartValidationBuilder.
UpdateMpvData
¶ Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog.
Signature
UpdateMpvData()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateSharpEdgesInformation¶
-
MWMoldedPartValidationBuilder.
UpdateSharpEdgesInformation
¶ Update the sharp edges information based on the new sharp angle limit which has been changed by the user.
Signature
UpdateSharpEdgesInformation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
UpdateSmallRadiusFacesInformation¶
-
MWMoldedPartValidationBuilder.
UpdateSmallRadiusFacesInformation
¶ Update the small radius faces information based on the new range limits of the radius which has been changed by the user.
Signature
UpdateSmallRadiusFacesInformation()
New in version NX8.0.0.
License requirements: ug_mold_design (“UG MOLD”) OR ug_prod_des_advisor (“Product Design Advisor”) OR prog_die_wizard (“UG/Progressive Die Wizard”) OR die_engineering (“DIE ENGINEERING”) OR ug_die_design (“Die Design”) OR nx_electrode_wizard (“NX Electrode Wizard”)
Validate¶
-
MWMoldedPartValidationBuilder.
Validate
¶ Validate whether the inputs to the component are sufficient for commit to be called.
If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.
Signature
Validate()
Returns: Was self validation successful Return type: bool New in version NX3.0.1.
License requirements: None.